If you looking for compressor regulator 3/8 then you are right place. We are searching for the best compressor regulator 3/8 on the market and analyze these products to provide you the best choice.
Reviews
1. PneumaticPlus SAU3030M-N03G Three Stage Air Drying System - Air Particulate Filter, 0.3 Micron Coalescing Filter & Air Pressure Regulator Modular Combo 3/8" NPT - Manual Drain, Poly Bowl
Feature
Max. Supply Pressure: 250 PSI, Max Operating Pressure: 150 PSISAF:10 Micron Element Stanard/ SAFM: 0.3 Micron Coalescing Filter Element
Manual Drain & Poly Bowl with Bowl Guard/Includes 0-150 PSI Pressure Gauge & Bracket
Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off.
Manufacturerd In Korea
Description
How It Works First, the air enter the particulate filter, which has 10 micron cleanable Polyethylene element. In this stage, corrosive moisture, pipe scale, dirt and rust are removed from air line protecting the precision part in the regulator. During Stage 2, fine filtration takes place. Here, 99.7 percentage of oil aerosols and microscopic particles down to 0.3 micron absolute are removed from the air. Third Stage, the air enter a high-performance regulator, which reduces primary pressure to a desired pressure setting. Installation Install units so the airflow is in the direction "IN-OUT" as indicated by arrow on the head of the unit. Install filter first in line of additional units such as regulators or lubricators, and as close as possible to the pneumatic tools or appliances being serviced. Unit must be installed in parallel from floor, downstream position for proper function. Do not install polycarbonate bowl in pressure that exceeds 150 PSI or where there is a presence of solvents harmful to polycarbonate. In these cases, use a metal bowl. The Unit can dis-assemble or assemble using a Phillips-head screwdriver or Allen wrench. An insert feature allows simple installation and removal in any location without disturbing the existing piping arrangement. The regulator can be mounted in either up or down position. This unique design allows unlimited adaptation to air preparation systems. Unit will permit use of standard size pipe nipples. Operation & Adjustments Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off. Sediment should not be permitted to fill above the lower baffle. Wash filter element at intervals with methylene chloride or similar cleansing fluid to maintain filtering efficiency.2. PneumaticPlus SAR3000M-N03BG Air Pressure Regulator, 3/8" Pipe Size, NPT with Gauge and Bracket
Feature
Pressure regulating range: 0 to 150 PSIFlow rate: 106 SCFM
Port size: 3/8" National pipe thread taper
Includes 0 - 150 PSI pressure gauge and bracket
Description
PneumaticPlus offers quality Air Preparation Units for various pneumatic applications. SAR Series Regulators offer stable air flow with locking adjustment knob to prevent accidental setting changes. SAR Modular Series Regulators can connect to SAF Modular Series Air Filters & SAL Modular Series Air Lubricators using our brackets to form a fully functional FRL unit. SAF Series Filters and SAL Series Lubricators are available on Amazon.com for purchase along with other PneumaticPlus Air Preparation Units.3. PneumaticPlus SAU3010M-N03G 2 Piece Compressed Air Filter Regulator Lubricator Combination, 3/8" Pipe Size, NPT-Manual Drain, Poly Bowl, 10 m with Gauge
Feature
3/8" National pipe thread taper two piece filter regulator lubricator piggyback comboMax supply pressure: 250 PSI, max operating pressure: 150 PSI
53 SCFM, 10 micron element standard
Manual drain and polycarbonate bowl
Model # SAU3010M-N03G consists of SAW3000M-N03G and SAL3000M-N03G
Description
PneumaticPlus SAU Series piggyback air filter regulator lubricator offers space saving complete airline solution for most effective air filtration, pressure control and lubrication to keep your air tools working properly. SAU Series piggyback air filter regulator lubricator is offered with Drain (Manual or Auto) and Bowl (Metal or Polycarbonate) options to better suit your needs. Oil Injection on the Lubricator can be adjusted and completed turned off as necessary.4. PneumaticPlus SAW3000M-N03BG Air Filter Regulator Combo Piggyback, 3/8" Pipe Size, NPT-Manual Drain, Poly Bowl with Gauge
Feature
3/8" National pipe thread taper Piggyback style filter regulator combo10 Micron filter element, flow rate: 53 SCFM
Max supply pressure: 250 PSI, max operating pressure: 150 PSI
Includes 0-150 PSI pressure gauge and bracket
Description
PneumaticPlus SAW Series Filter-Regulators, or "Piggybacks" combine the functions of both filter and regulator. Piggybacks are compact and most effective when space is constrained. FILTER: Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off. Sediment should not be permitted to fill above the lower baffle. Wash filter element at intervals with methylene chloride or similar cleansing fluid to maintain filtering efficiency. To clean element, depressurize system, pull down the lock and twist off the metal guard and polycarbonate bowl and unscrew element from head. Dry filter element thoroughly before reassembling. Clean filter bowl(s) only with soapy water. Inspect O-ring, replacing if damaged or distorted. Reassemble with care to avoid stripping threads on bowl. After a metal bowl with sight is tightened, it may be rotated up to 180 (for proper viewing.) REGULATOR: Before supplying the air, turn the adjusting knob counter-clockwise until compression is released from the control spring. Turn on the air supply and adjust the knob to set the desired secondary pressure by turning the knob clockwise. Note: Adjustment knob must be pulled away from the body of the regulator to operate. After desired secondary pressure is set, pushing the knob back towards the body will lock the control knob. IMPORTANT: Use care to avoid screwing fittings too far into body of units as it may close internal ports. Normally finger tight plus one turn will seal. Bowl (Metal or Polycarbonate) and Drain (Auto or Manual) Options available.5. ARO R37231-600-VS Air Regulator 3/8" NPT, w/ Gauge - 250 psi Max Inlet
Feature
3/8-Inch NPT0-140 PSI Pressure Range
Flush-mount Gauge
Relieving - standard knob control
113 CFM
Description
The Ingersoll Rand air line regulator provides the controlled, consistent air pressure required for specific air equipment connected to an air system. Designed to deliver the pressure you need with precise control over outlet pressure while maintaining relative torque and speed control and conserving air pressure. Max. PSI: 250, CFM: 113, Size: 3/8in., Application: Regulator, Includes: (1) Regulator6. Rapidair K93215 NPT Filter Regulator, 3/8-Inch
Feature
Maximum Inlet Pressure 175 psi, Operating range 0-150 psiIncludes Mounting Bracket and Square Embedded Pressure Gauge
Manual Drain and Metal Bowl Guard
5 Micron Filter
Flow Direction is Reversible by Relocating Gauge to Opposite side
Description
This combination filter regulator is a space saving design, combining both operations into one unit. General purpose filter protects air tools by removing most solid particles and liquid contaminants. Regulator allows the pressure adjustment of your compressed air system.7. PneumaticPlus SAR300T-N03BG Air Pressure Regulator 3/8" NPT, T-Handle, Gauge & Bracket
Feature
Max. Supply Pressure: 250 PSI / Pressure Regulating Range: 0 to 150 PSIFlow Rate: 110 SCFM @ 90 PSI
Relieving Type Regulator- T-Handle /Port Size: 3/8" NPT
Includes 0 - 150 PSI Pressure Gauge & Bracket
1 Year Limited Warranty, Manufactured in Korea
Description
PneumaticPlus offers quality Air Preparation Units for various pneumatic applications. SAR Series T-Handle Regulators offer stable air flow with a locking hex nut to prevent accidental setting changes. SAR Series T-Handle Regulators can connect to SAF Series Air Filters & SAL Series Air Lubricators using our modular brackets to form a fully functional FRL unit. SAF Series Filters and SAL Series Lubricators are available on Amazon.com for purchase along with other PneumaticPlus Air Preparation Units. Search for "SAF300" in Amazon search box and you will find SAF300 Series Filters with Drain and Bowl options that will fit your need. Search for "SAL300" in Amazon search box and you will find SAL300 Series Lubricators with Bowl option that will fit your need. Looking for a space saving piggyback Filter Regulator? Search for "SAW300" in Amazon search box for our Filter-Regulator Piggyback units.8. 3/8" Air Regulator Control Unit Filter Lubrication Air Compressor Water Trap
Feature
3 IN 1 AIR CONTROL PREP UNIT 3/8",Regulator With 160psi Gauge Oiler Lubricator;"Oil & Water Separator Unit Air
Inlet: 3/8 Max. Pressure of 150PSI"
Temperature Range: 5-60 Degrees C (40-160F)
Description
3 IN 1 AIR CONTROL PREP UNIT 3/8Regulator With 160psi Gauge
Oiler Lubricator; Oil & Water Separator Unit
Air Inlet: 3/8"
Max. Pressure of 150PSI
Temperature Range: 5-60 Degrees C (40-160F)
"
9. IN-LINE COMPRESSED AIR FILTER REGULATOR COMBO PIGGYBACK, 3/8" NPT PORTS, 105 CFM, POLY BOWL AND GUARD, 5 MICRON ELEMENT
Feature
3/8" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK215 PSI MAX INPUT PRESSURE, 150 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED
2.7 OUNCE POLY BOWL WITH QUCIK RELEASE METAL BOWL GUARD, 105 SCFM FLOW RATE
ADJUSTS 7 PSI TO 150 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT
3/8" NPT OUTSIDE THREAD DIAMETER IN INCHES 0.675"
