If you looking for tb6600 3 axis then you are right place. We are searching for the best tb6600 3 axis on the market and analyze these products to provide you the best choice.
Reviews
1. SainSmart Mach3 CNC USB 3 Axis Kit, TB6600 3 Axis Stepper Motor Driver, USB Controller Card 100KHz, 3pcs Nema23 270oz-in Motor
Feature
12V Power output: Maximum output 2A current, for CNC controller or Mach3 interface board power supply.Automatic half current function: when the motor stops running, the standby current is automatically reduced to half of the working current to reduce the heat of the driver.
Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor
4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
Description
Overview:TB6600-T3 3 axis driver board, using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current,
current stepless adjustable, 3 stepper motors can be driven at the same time, suitable for NEMA17, NEMA23 stepper motor,
has a 12V power supply,can be used for MACH3 interface board or CNC controller; have large driver current, smooth running,
quiet small volume, convenient installation, high cost performance. It is suitable for making CNC machines and other
automation equipment.
This USB motion control card has the below advantages: easy to use, has a strong anti-interference ability,
No need to install any USB drivers, it can be used after plugging in the computer. ,suitable for all versions of Windows.
Support mach3mill various versions of software. Used for making engraving machine control system.
Package list:
1 x TB6600-T3 3 Axis stepper motor driver board
1 x mach3 4 Axis USB CNC Controller card 100KHz
3 x nema23 76mm length stepper motor
1 x 36V/9.7A switching power supply
1 x USB cable
1 x CD(User manual, wiring diagram, control software, etc.)
Download:
http://s3.amazonaws.com/s3.image.smart/download/101-60-272/101-60-272.zip
2. Baynne CNC Single Axis TB6600 0.2-5A Two Phase Hybrid Stepper Motor Driver Controller
Feature
Supply voltage up to 50V DC,Output current up to 5.0A.Suitable for 2-phase and 4-phase motors;High speed optoelectronic isolation signal input.
Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
Description
Feature:
High performance, cost-effective.
Automatic idle-current reduction.
1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually.
Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
The TB1H is a high performance microstepping driver based on the latest original for TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (50V) process technology on the chipset also ensures maximum 5.0A output current and 50V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver.
Product Properties:
Brand:no
Type:Stepper Motor
Model:TB6600
Specifications:
Applications:
For processing various pattern mould.
For carving portrait, scenery, handwriting, sealing, etc..
Color:black
Package includes:
1 x TB6600 0.2 - 5A Two Phase Hybrid Stepper Motor Driver Controller
3. Professional Single Axis TB6600 0.2-5A Two Phase Hybrid Stepper Motor Driver Controller 50V DC for CNC
Feature
0Description
Product Properties:
Brand:no
Type:Stepper Motor
Model:TB6600
Specifications:
Applications:
For processing various pattern mould.
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..
For carving portrait, scenery, handwriting, sealing, etc..
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
Color:black
Package includes:
1 x TB6600 0.2 - 5A Two Phase Hybrid Stepper Motor Driver Controller
4. New CNC Single Axis TB6600 0.2-5A Two Phase Hybrid Stepper Motor Driver Controller
Feature
Brand new& High quality.Description
New CNC Single Axis TB6600 0.2-5A Two Phase Hybrid Stepper Motor Driver Controller5. SainSmart CNC Router 3 Axis Kit, TB6600 3 Axis Stepper Motor Driver, Mach3 5 Axis Breakout Board, 3pcs Nema23 270oz-in Motor
Feature
Output current: 04.5A, current stepless adjustable12V Power output: Maximum output 2A current, for CNC controller or Mach3 interface board power supply.
Suitable for computers with parallel port, operating system is WIN7 32-bit or XP.
USB power supply and peripherals powered phase separation to protect computer security.
Can be accessed by a common cathode or common anode input level to 5V drive.
Description
Overview:TB6600-T3 3 axis driver board, using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current,
current stepless adjustable, 3 stepper motors can be driven at the same time, suitable for NEMA17, NEMA23
stepper motor, has a 12V power supply, can be used for MACH3 interface board or CNC controller; have large
driver current, smooth running, quiet small volume, convenient installation, high cost performance,
It is suitable for making CNC machines and other automation equipment.
5Axis mach3 interface board, suitable for mach3mill software, used for making engraving machine.
Suitable for computers with parallel port, operating system is WIN7 32-bit or XP.
Package list:
1 x TB6600-T3 3 Axis stepper motor driver board
1 x 5 axis breakout board
3 x nema23 76mm length stepper motor
1 x 36V/9.7A switching power supply
1 x DB25 parallel cable
1 x USB cable
3 x signal cables
1 x CD(User manual, wiring diagram, control software, etc.)
Download:
http://s3.amazonaws.com/s3.image.smart/download/101-60-274/101-60-274.zip
6. SainSmart 3 Axis TB6600 T3 Stepper Motor Driver Board CNC Controller for NEMA17 NEMA23 Stepper Motor
Feature
12V Power output: Maximum output 2A current, for CNC controller or Mach3 interface board power supply.Automatic half current function: when the motor stops running, the standby current is automatically reduced to half of the working current, which can reduce the heat of the driver.
Overheated protection, over-current protection.
The maximum pulse rate is 200KHZ.
Using the PWM chopper - type single - chip bipolar sinusoidal Micro - step current control mode.
Description
Overview:TB6600-T3 3 axis driver board, using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current,
current stepless adjustable, 3 stepper motors can be driven at the same time, suitable for NEMA17,
NEMA23 stepper motor, has a 12V power supply, can be used for MACH3 interface board or CNC controller;
have large driver current, smooth running, quiet small volume, convenient installation,
high cost performance, It is suitable for making CNC machines and other automation equipment.
Specification:
Dimensions: 166mm*88mm*34mm
DC Power input type: 14V-40V
Output current: 14.5A, current stepless adjustable
Working environment: Temperature-1550 Humidity<90%
Package list:
1.TB6600-T3 3 Axis stepper motor driver board
2.CD(English user manual)
7. Stepper Motor Driver, MYSWEETY TB6600 0.2-5A Nema 17/23 CNC Controller Stepper Motor Driver 1 Axis 2 Phase Hybrid Stepper Motor
Feature
TB6600 (5A) step motor driver is a professional two phase stepping motor driver, which can realize the motor positive or inversion control. The driver has the characteristics of low noise, small vibration and stable operation.Input voltage: 12-48VDC; Input current: 0.2-5.0A; Output current: 0.2-5.0A; Maximum power: 250W. 1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
100% satisfactory. If you have any question, pls contact us firstly. Thanks!
Description
Feature:Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually.
Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
The TB1H is a high performance microstepping driver based on the latest original for TOSHIBA high-efficiency TB6600HG for IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Moreover, the brand new design with BiCD0.13 (50V) process technology on the chipset also ensures maximum 5.0A output current and 50V output withstand voltage.
Specifics:
Automatic idle-current reduction
Supply voltage up to 50V DC
Output current up to 5.0A
High speed optoelectronic isolation signal input.
Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
Application:
as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver.
For processing various pattern mould.
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc..
For carving portrait, scenery, handwriting, sealing, etc..
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
Package include:
1 X TB6600 4-aixs stepper motor driver
8. CNC Single Axis TB6600 0.2-5A Two Phase Hybrid Stepper Motor Driver Controlle AP
Feature
Ship From Balance worldSupply voltage up to 50V DC
Output current up to 5.0A.
Suitable for 2-phase and 4-phase motors.
More detail see description
Description
100% Brand New And High Quality High performance, cost-effective. Automatic idle-current reduction. Supply voltage up to 50V DC Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. 1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly. Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually. Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (50V) process technology on the chipset also ensures maximum 5.0A output current and 50V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Applications: For processing various pattern mould. For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc.. For carving portrait, scenery, handwriting, sealing, etc.. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices. Color:black Product Weight: about 236g Package includes: 1 x CNC Single Axis TB6600 0.2 - 5A Two Phase Hybrid Stepper Motor Driver Controller9. FidgetGear 2PCS TB6600 4.5A CNC Single-axis Stepper Motor Driver Board Controller top
Description
Product Description
1) Operating voltage DC 10V-45V. DC32V switching power supply is recommended.
2) high-speed optical coupling 6N137, ensure high speed without losing step.
3) Toshiba's new high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560.
4) Rated maximum output reached: 4.5A.
5) for 4.2A 42,57,86 within the two-phase / four-phase / four-wire / six-wire stepper motor.
6) Automatic half current function.
7) Subdivision: full step, half step, 1/4-step, step 1/8, 1/16-step, up to 16 segments.
8) Volume: Width Length 82 * 50 * high 35 (MM)
Product Features:
1, the output current is infinitely adjustable to meet your various application requirements.
2, automatic half current function. And a semi-automatic flow switch, easy to use.
3, the use of high-speed optical coupling 6N137 ensure high-speed without losing step.
4, printed on the back panel are subdivided setup instructions.
5, used to increase the heat sink, good heat dissipation.
6, output short-circuit protection, the use of mind.
7, using common anode input mode, there are two input terminals, wiring more convenient.
