If you looking for wheeler gunsmith tools then you are right place. We are searching for the best wheeler gunsmith tools on the market and analyze these products to provide you the best choice.
Reviews
1. Wheeler Professional Reticle Leveling System
Feature
Precision tool for scope reticle alignmentFactory calibrated Reference Level
CNC machined aluminum level housings
Tunable Barrel Clamp Level
Protective storage case
Description
Technological advances in today's modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system's scope is critical to realizing the accuracy. A scope's reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur. The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.2. Wheeler Firearms Accurizing Torque Wrench
Feature
Torque adjustment range from 10 inch/pounds to 65 inch/pounds,Includes convenient molded case for storageAccuracy plus/minus 2 inch/pounds up to 40 inch/pounds, 40-65 inch/opounds is accurate to plus/minus 5%
Includes 10 of the more popular gunsmithing bits and a 1/4" socket
This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field
Allows for consistency to every screw, fir repeatable, accurate torque settings to scope rings, guard screws and more
Description
Wheeler's FAT Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field. The FAT Wrench is a perfect complement to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.3. Wheeler Universal Bench Block
Feature
Great tool for disassembling & assembling handgunsPerfect for use on M1911 pistols as well as other firearms such as 10/22s
Made of non-marring urethane
Rear sight drift channel, front sight staking channel and hammer and Sear pin removal holes
Ejector port dressing and rail dressing round bottom channels
Description
For firearm assembly and disassembly, the Universal Bench Block is your best friend. It features a variety of notches, grooves, and holes on both sides and is ideally suited for M1911-style pistols. Need to install a pin, detent, or spring? The Universal Bench Block is the answer. 1-5/16" high, 4" in diameter. Non-marring urethane for long use.4. Wheeler 710905 Engineering Armorer's Handgun Sight Tool
Feature
Handgun sight tool designed to install, un-install or adjust front and rear dovetail sights and works on all semi auto pistolsPrecision machined unit with large 4 post drive knob to easily push the sight
Fully captures and supports slide so it won't deform
Reference marks for precise adjustments
Sight prong assembly is reversible to accomodate Glock slides
Description
The Wheeler Engineering Armorers Handgun Sight Tool is a precision machined Handgun Sight Tool. It is designed to install un-install or adjust front and rear dovetail sights. The Wheeler Handgun Sight tool fully captures and supports slides so it wont deform them. The Sight Tool works on all semi-automatic pistols. It features a large 4 post drive knob to easily push the sight and has reference marks for precise adjustments.5. Wheeler 710906 Engineering Bolt Catch Install Tool Kit
Feature
Start bolt catch roll pin easily with starter punchFinish installation flush with the finishing punch
Flat on one side for proper alignment
1 with counter-bored tips to start roll pins
1 with indexing tips to finish roll pins
Description
Wheeler Engineering Bolt Catch Install Tool Kit: start bolt catch roll pin easily with starter punch and finish installation flush with the finishing punch. Flat on one side for proper alignment and rubber over-molded to prevent damage to firearm.6. Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454
Feature
Kit includes:Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lockProvides virtually everything needed to properly mount any 1-inch or 30mm scope
Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings
Reticle leveling is a key component for the accuracy of a scope set up- the Level-Level-Level helps you to do so properly
Securing fastners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy
Description
The Wheeler Engineering Scope Mounting Kit Combo 1-inch/30mm is a complete scope mounting kit that provides everything necessary to mount a scope the correct way. Proper scope installation is critical to the accuracy of your firearm. Get the most accuracy possible out of your gun by ensuring proper scope installation. The Wheeler Alignment Bars, Lapping Bars and Lapping Compound allow you to achieve the perfect fit between scope and rings. Securing Fasteners properly is critical to accuracy as well. Precisely controlled torque along with thread locking compound will keep your scope held securely in place. Professional grade bits and the F.A.T. Wrench are the perfect combination to properly secure fasteners without deformation7. Wheeler Gunsmithing Screwdriver Kit (72-Piece)
Feature
54 hallow ground flat bits made of durable S2 tool steel and designed to match the thin slots in gun screwsComes with 4 Phillips Bits
8 Allen Bits (1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16)
3 Torx Bits (T10, T15, T20)
Two non-slip over-molded handles and convenient hinged storage case
Description
Wheeler's Deluxe Gunsmithing 72 Piece Screwdriver Set is the kit that belongs on every gunsmithing bench. The well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any screwdriver set, and Wheeler's are the finest available. They are made from S2 tool steel and hardened to 56-58 Rockwell "C". Unlike other screwdriver suppliers, Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation. Comes with 8 Allen Bits (1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16), 4 Phillips Bits and 3 Torx Bits (T10, T15, T20).8. Wheeler Precision Micro Screwdriver Set
Feature
Chrome plated steel bitsExtendable handle from 3-3/4" to 5-1/2"
58 piece set
Organized carry/storage case
Individual bit markigs and precision formed pits for maximum fastener engagement
Description
Wheeler Engineering Precision Micro Screwdriver Set The Wheeler Engineering Precision Micro Screwdriver Set features high quality, chrome plated steel bits to hold up to heavy use and the comprehensive 58 piece set meet all of your precision screwdriver needs. The set include a handle that extends from 3-3/4" to 5-1/2" and a 5-3/4" flexible extension shaft to get you into those hard to reach places. The set comes organized with individual bit markings and a convenient carry/storage case. All bits are precision formed for maximum fastener engagement.9. Wheeler Hammer and Punch Set In Plastic Case
Feature
Includes hammer with brass and Polymer face8 brass punches: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16"
4 steel punches: 2 each of 1/16" and 3/32"
2 plastic punches: 15/64" and 3/8"
Molded plastic storage case included
Hammer with brass and polymer face
Molded plastic storage case