If you looking for clevis shackle mount then you are right place. We are searching for the best clevis shackle mount on the market and analyze these products to provide you the best choice.
Reviews
1. U.S. made Weld-On Shackle Mounts - LASER-CUT (PAIR) (OFF-ROAD RECOVERY)
Feature
Sold in pairs. Available as single also.LASER-CUT - Ready-to-weld finish. 1/4 inch base chamfer base for good weld penetration.
2 3/8 inch tall. 2 3/8 inch long. 1 inch wide. Fits our 3/4 inch D-shackles.
D-shackles sold seperately
U.S. Made. IN STOCK - SHIPS TODAY!
Description
Now you can build your own Xtreme-duty bumper shackle mounts welded directly to your custom off-road bumper. Cut to fit perfectly any standard 4x4 inch D-shackle. Chamfered at the base for good weld penetration.2. U.S. made WELD-ON BUMPER SHACKLE MOUNTS - MACHINED (PAIR) (OFF-ROAD RECOVERY)
Feature
Sold in pairs or singles.Ready-to-weld finish.
Fits our 3/4 inch D-shackles.
D-shackles sold seperately
U.S. Made. IN STOCK - SHIPS TODAY!
Description
Now you can build your own Xtreme-duty bumper shackle mounts welded directly to your custom off-road bumper. Cut to fit perfectly any standard 4x4 inch D-shackle. Chamfered at the base for good weld penetration.3. XD 3 TON PATRIOT RED Powdercoated BUMPER SHACKLE MOUNTS - MACHINED (PAIR) with D-Shackles & Backing Plates
Feature
Sold in pairs or singles.D-SHACKLES: Working Load Limit permanently shown on every shackle. Forged - Quenched and Tempered, with alloy pin. Rust resistant SEMI-GLOSS powdercoated finish. 9,500 lb Working Load Limit. 47,500 lb Ultimate Strength. 7/8 Pin Diameter.
BUMPER SHACKLE MOUNT: 3 inch X 2 inch bolt pattern. 4 inch X 3 inch outer dimensions. PATRIOT RED Powdercoated finish. Fits our PATRIOT RED Powdercoated 3/4 inch D-shackles.
BACKING PLATES: 3 inch X 2 inch bolt pattern. Overall dimensions 1/4 inch wider than shackle mount. Accepts our HD & XD Bumper Shackle Mounts. Ready-to-be-painted finish. 1/4 inch thick steel.
U.S. Made. IN STOCK - SHIPS TODAY!
Description
Our Xtreme-duty PATRIOT RED Powdercoated bumper shackle mounts fit every make of off-road bumper including brand-name bumpers (ARB, TJM), and custom-made bumpers. Without question, the strongest add-on recovery point you can buy. The recommended solution for vehicles without bumper-integrated recovery points, or solid frame-mounted recovery points (Factory tie-downs are not recovery points). Grade 8 mounting hardware included.4. RHINO USA Shackle Hitch Receiver, Best Towing Accessories for Trucks & Jeeps, Connect Your Rhino Tow Strap for Vehicle Recovery to This 31,418 Lbs Capacity Reciever, Mounts to 2” Receivers!
Feature
SUPPORT AN AMERICAN CO. - Buy From a Father/Son Business in California & Receive a Lifetime Warranty!SUPERIOR QUALITY - Lab Tested at 31,418lb Max Break Strength, #1 For Sale on Amazon!
DON'T RISK YOUR LIFE - Use a Rhino Shackle Hitch Receiver Instead of Connecting your Tow Strap to a 2" Ball!
CONFIDENCE & PEACE OF MIND - Knowing you Have top Quality Equipment to get you out of any Situation!
GUARANTEED 5-STAR EXPERIENCE - If you aren't 100% Satisfied for any Reason, well Refund your Money
Description
" Amazing product! set up was simple to install on my truck, heavy duty & perfect for towing my atv" - Clay Clevis5. Chassis Unlimited CU-59104 2" Extra Long D-Ring/Clevis Mount
Feature
CNC Machined From 1018 Cold Rolled Steel, Extra Long, For Mounting through-bumpers or onto Frames. 1" Thru-bore and a 2" Wide Mounting Base. Sold IndividuallyDescription
These Clevis D-Ring & Shackle Mounts make the Perfect Recovery point for your Rig. Excellent for mounting to and thru Bumpers, Frames, Skid plates, Crossmembers, Trailers, and just about any thing else you would need a stong recovery point on. These are made in house, on our CNC milling machines- Like all Chassis Unlimited Parts, the Finish is First class, and is ready to paint after welding. The Mounts all feature radiused the corners, and Chamfered edges. Makes for Easy welding, and no Sharp Corners to cut your self, or your recovery gear on. These are always in-stock, for same day Shipment! Features- -CNC Machined from 1" Thick 1018 Cold Rolled Steel -1" Thru Bore- Perfect for upto 7/8 Clevis Pins -2" Wide -Optional 3/4" Mounting Holes, for Bolting onto Frames ETC. -Sold Individually6. Chassis Unlimited CU-59100 3.5" Flat Bottom D-Ring/Clevis Mount
Feature
CNC Machined From 1018 Cold Rolled Steel, 1" Thru-bore and a 3.5" Wide Mounting Base. Sold IndividuallyDescription
These Clevis D-Ring & Shackle Mounts make the Perfect Recovery point for your Rig. Excellent for mounting to Bumpers, Frames, Skid plates, Crossmembers, Trailers, and just about any thing else you would need a stong recovery point on. These are made in house, on our CNC milling machines- Like all Chassis Unlimited Parts, the Finish is First class, and is ready to paint after welding. The Mounts all feature radiused the corners, and Chamfered edges. Makes for Easy welding, and no Sharp Corners to cut your self, or your recovery gear on. These are always in-stock, for same day Shipment! Features- -CNC Machined from 1" Thick 1018 Cold Rolled Steel -1" Thru Bore- Perfect for upto 7/8 Clevis Pins -3.5" Wide at is lower base -Sold Individually7. Weld thru Clevis/Shackle Mounts
Feature
Fits 3/4 inch Clevis or Shackle5.5 inches long
1 inch Thick
2 inches Wide
Sold as a pair
Description
Weld thru clevis mounts. Also known as shackle mounts. These are 5.5" Long. They work perfect for a weld thru set up for most bumpers out there. Fits 3/4" Clevis or Shackle. 5.5" Long, 1" Thick, 2" Wide - Sold as a Pair8. XD 3 TON BUMPER SHACKLE MOUNTS - MACHINED (PAIR) with Backing Plates
Feature
Sold in pairs or singles.BACKING PLATES: 3 inch X 2 inch bolt pattern. Overall dimensions 1/4 inch wider than shackle mount. Accepts our HD & XD Bumper Shackle Mounts. Ready-to-be-painted finish. 1/4 inch thick steel.
BUMPER SHACKLE MOUNT: Black Powdercoated finish. Fits our 3/4 inch D-shackles. D-shackles sold seperately.
BUMPER SHACKLE MOUNT: 3 inch X 2 inch bolt pattern. 4 inch X 3 inch outer dimensions.
U.S. Made. IN STOCK - SHIPS TODAY!
Description
Our Xtreme-duty bumper shackle mounts fit every make of off-road bumper including brand-name bumpers (ARB, TJM), and custom-made bumpers. Without question, the strongest add-on recovery point you can buy. The recommended solution for vehicles without bumper-integrated recovery points, or solid frame-mounted recovery points (Factory tie-downs are not recovery points). Grade 8 mounting hardware included.9. U.S. made WELD-ON BUMPER SHACKLE MOUNTS - MACHINED (SINGLE) (OFF-ROAD RECOVERY)
Feature
Sold in pairs or singles.Ready-to-weld finish.
Fits our 3/4 inch D-shackles.
D-shackles sold seperately
U.S. Made. IN STOCK - SHIPS TODAY!
Description
Now you can build your own Xtreme-duty bumper shackle mounts welded directly to your custom off-road bumper. Cut to fit perfectly any standard 4x4 inch D-shackle. Chamfered at the base for good weld penetration.10. XD 3 TON BUMPER SHACKLE MOUNT - MACHINED with D-Shackle (SINGLE)
Feature
Sold in pairs or singles.D-SHACKLE: Working Load Limit permanently shown on every shackle. Forged - Quenched and Tempered, with alloy pin. Rust resistant SEMI-GLOSS powdercoated finish. 9,500 lb Working Load Limit. 47,500 lb Ultimate Strength. 7/8 Pin Diameter.
BUMPER SHACKLE MOUNT: Black Powdercoated finish. Fits our 3/4 inch D-shackle.
BUMPER SHACKLE MOUNT: 3 inch X 2 inch bolt pattern. 4 inch X 3 inch outer dimensions.
U.S. Made. IN STOCK - SHIPS TODAY!
Description
Our Xtreme-duty bumper shackle mounts fit every make of off-road bumper including brand-name bumpers (ARB, TJM), and custom-made bumpers. Without question, the strongest add-on recovery point you can buy. The recommended solution for vehicles without bumper-integrated recovery points, or solid frame-mounted recovery points (Factory tie-downs are not recovery points). Grade 8 mounting hardware included.11. Chassis Unlimited CU-59101 2" Flat Bottom D-Ring/Clevis Mount