If you looking for hollow wall anchors then you are right place. We are searching for the best hollow wall anchors on the market and analyze these products to provide you the best choice.
Reviews
1. Topzone Heavy Duty 1/8" inch 46mm Zinc Plated Steel Hollow Drive Wall Anchor w/ Screws (40)
Feature
Hollow wall drive anchors do not require pre-drilling - drive into walls in secondsZinc Plated Steel
1/8" Diameter
46mm Length
For 3/4" wall thickness
Description
Hollow wall drive anchor. Greater holding power than nails or screws in hollow walls. Fixtures can be removed or replaced without removing anchor. 5/16" Drill diameter. For static loads use one-fourth (25%) of the ultimate tensile & shear strengths shown. 40 psi allowable tensile strength in 3/4" drywall.2. Self Drilling Drywall / Hollow-Wall Anchor Kit with Screws, 100 Pieces All Together, Kit Includes 2 Different Sizes, Large and Small Anchors (Zinc)
Feature
High quality anchors pre-drills precise hole in types of drywall - No hole preparation required, Constructed from durable zinc to last for years. Can be easily removedDeep thread design provides strong engagement, locks into many sizes of drywall (", ",") for maximum holding power. Starts easier than other self-drilling drywall anchors
Large Anchor holds up to 50 lbs, good for heavier applications such as big pictures, shelves, and artwork.
Mini Anchor holds up to 40 lbs, leaves smaller footprint, good for applications where anchor needs to be hidden
Kit includes 25 Large Anchors, 25 Mini Anchors, 25 #8 X 1-" screws, 25 #6 X 1-" screws.
3. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 5)
Feature
Hollow-door anchor provides a firm hold from within hollow-core doors and thin panels 1/8" to 1/4" thickAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes #8 x 1-1/4" screws
Ultimate tensile strength is 124 lb. in 1/4" plywood with a #8 x 1-1/4" screw
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #8 to #12 size screws with a minimum thread length of 1". The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors.
Specifications
Ultimate Tensile Strength Values
| Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 1/2" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
| TA | 5/16" | #8 x 1-1/4" | 124 lb. | Not applicable | Not applicable | Not applicable | Not applicable |
| TB | 5/16" | #8 x 1-1/2" | Not applicable | 175 lb. | 97 lb. | 143 lb. | Not applicable |
| TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | Not applicable | 159 lb. |
Ultimate Shear Strength Values
| Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
| TA | 5/16" | #8 x 1-1/4" | 265 lb. | Not applicable | Not applicable | Not applicable |
| TB | 5/16" | #8 x 1-1/2" | Not applicable | 126 lb. | 167 lb. | Not applicable |
| TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | 237 lb. |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (5) TOGGLER Toggle TA anchors
- (5) #8 x 1-1/4" screws
- (1) Setting key
4. TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 3/16"-24 UNC-threaded bolts
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
| Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength Values | Ultimate Shear Strength Values |
| 1/2" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 238 lb. | 247 lb. |
| 5/8" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 356 lb. | 298 lb. |
| 1/2" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 412 lb. | Not Available |
| 5/8" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 462 lb. | Not Available |
| Concrete Block | 1/2" | 3/16"-24 UNC zinc-plated steel | 802 lb. | Not Available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (10) TOGGLER SNAPTOGGLE BA toggle anchors
- (10) 3/16"-24 UNC bolts
5. The Hillman Group 5009 Hollow Wall Anchor
Feature
Use for 3/8 to 1/2 In. Wall ThicknessUse in drywall, plaster and tile
Size: 3/16 Short
Description
Primarily used in drywall, the hollow wall anchor is a medium duty fastener. Once the body of the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor. The tip has a drive point to pierce drywall easily.6. The Hillman Group 370054 Toggle Bolt, 3/16X3-Inch, 50-Pack
Feature
Features a round slotted/Phillips headA pre-drilled hole is required for installation
Toggle bolts are very strong and are great for hanging objects
Description
Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications. The wing disperses the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.7. Hard-to-Find Fastener 014973265038 Long Hollow Wall Anchors, 1/4-Inch, 8-Piece
Feature
Diameter: 1/4"Length: Long
Material: Steel
Finish: Zinc
Head Style: Pan
Description
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.8. #1 Best Quality Zinc Self Drilling Drywall Anchors with Screws Kit, 100 Pieces All Together
Feature
Drill Point Pre-drills precise hole in wood or double drywall etc. No hole preparation requiredStarts easier than other drywall anchors, drills directly into drywall even if you hit a wood stud
Deep thread design provides strong engagement in 3/8", 1/2" or 5/8" gypsum wallboard
Zinc die-cast design for maximum durability. Can be easily removed
Kit Includes 50 Zinc Anchors, 50 #8 x 1-1/4'' Phillips Screws and a Plastic Case, Hangs up to 50 lbs
9. TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 20)
Feature
Residential drywall anchor provides a firm hold from within 3/8"- to 1/2"-thick drywallAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes #8 x 1-1/2" screws
Ultimate tensile strength is 143 lb. in 1/2" drywall with a #8 x 1-1/2" screw
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER Toggle TB residential drywall anchor provides a firm hold in 3/8"- to 1/2"-thick drywall, includes #8 x 1-1/2" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #6 to #14 size screws with a minimum thread length of 1-1/4". The Toggle TB anchor meets Federal Specification FF-B-588-D for Type IV anchors.
Specifications
Ultimate Tensile Strength Values
| Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 1/2" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
| TA | 5/16" | #8 x 1-1/4" | 124 lb. | Not applicable | Not applicable | Not applicable | Not applicable |
| TB | 5/16" | #8 x 1-1/2" | Not applicable | 175 lb. | 97 lb. | 143 lb. | Not applicable |
| TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | Not applicable | 159 lb. |
Ultimate Shear Strength Values
| Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
| TA | 5/16" | #8 x 1-1/4" | 265 lb. | Not applicable | Not applicable | Not applicable |
| TB | 5/16" | #8 x 1-1/2" | Not applicable | 126 lb. | 167 lb. | Not applicable |
| TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | 237 lb. |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (20) TOGGLER Toggle TB anchors
- (20) #8 x 1-1/2" screws
- (1) Setting key
10. Qualihome Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Screws, Wall Anchor Hooks, and Hollow-door Toggle, 112 Pieces
Feature
The ribs on the plastic anchors prevent the anchor from turning in the hole during installationHollow-door anchor provides a firm hold from within hollow-core doors and thin panels
For light to medium support in Drywall & Masonry
Comes in a handy Plastic organizer case with size compartments for easy storage
For a complete list what the kit includes scroll down or click see more product details
Description
Kit Includes: Anchors: #6- #8 Plastic Anchor, 22 Pieces. #10- #14 Plastic Anchor, 5 Pieces. #6 Auger Anchors, 6 Pieces. #8 Auger Anchors, 4 Pieces. 3/16" - 1/4" Wall Anchor Hooks, 6 Pieces. Drywall Anchors, 6 Pieces. Hollow Door Anchors, 6 Pieces . Pan Head Phillips Sheet Metal Screws: #6 x 3/4 inch, 6 Pieces. #6 x 1 inch, 22 Pieces. #8 x 1 inch, 4 Pieces. #10 x 1-1/4" inch, 15 Pieces.Hello Dear Shopper,
We hope that you found the product you need, But if this is not the product you were looking for, don't worry we still have a bunch of related products that might suit your needs, Check out the list below, and if you find something you like, just copy the link into your browser and it will take you to the item.
#1 Best Quality Small Hardware Nail and Brad Assortment Kit, 550 Pieces
http://www.amazon.com/dp/B01BRURGRQ
Household Assortment Kit, Cup Hooks, Picture Hangers, Push Pins, Thumb Tacks, Brads, Plastic Anchors, Screws and Nails, 360 Pieces.
http://www.amazon.com/dp/B01AH4VUG6
Stove Bolts, Nuts, and Washer Assortment Kit, 108 Pieces
http://www.amazon.com/dp/B019PXB6Z0
Qualihome Picture Hangers Assortment Kit, 80 Pieces
http://www.amazon.com/dp/B0184OZS7S
Qualihome #10-12 x 1" Blue Ribbed Plastic Anchor Kit with Screws and Masonry Drill Bit (201-Pieces)
http://www.amazon.com/dp/B017J97MVE
Qualihome Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Molly Bolts, Screws, and Toggle Bolts, 100 Piece.
http://www.amazon.com/dp/B012Q2OBGI
11. TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 5)
Feature
Residential drywall anchor provides a firm hold from within 3/8"- to 1/2"-thick drywallAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes #8 x 1-1/2" screws
Ultimate tensile strength is 143 lb. in 1/2" drywall with a #8 x 1-1/2" screw
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER Toggle TB residential drywall anchor provides a firm hold in 3/8"- to 1/2"-thick drywall, includes #8 x 1-1/2" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #6 to #14 size screws with a minimum thread length of 1-1/4". The Toggle TB anchor meets Federal Specification FF-B-588-D for Type IV anchors.
Specifications
Ultimate Tensile Strength Values
| Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 1/2" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
| TA | 5/16" | #8 x 1-1/4" | 124 lb. | Not applicable | Not applicable | Not applicable | Not applicable |
| TB | 5/16" | #8 x 1-1/2" | Not applicable | 175 lb. | 97 lb. | 143 lb. | Not applicable |
| TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | Not applicable | 159 lb. |
Ultimate Shear Strength Values
| Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
| TA | 5/16" | #8 x 1-1/4" | 265 lb. | Not applicable | Not applicable | Not applicable |
| TB | 5/16" | #8 x 1-1/2" | Not applicable | 126 lb. | 167 lb. | Not applicable |
| TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | 237 lb. |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (5) TOGGLER Toggle TB anchors
- (5) #8 x 1-1/2" screws
- (1) Setting key
12. 12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt (included)
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
Mount anything!The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
13. Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-wall Anchor Molly Bolt Toggle Bolt with Screws Kit
Feature
This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical.Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws
The ribs on the plastic anchors prevent the anchor from turning in the hole during installation
The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer
These toggle bolts are anchors for use in hollow walls and hollow masonry applications
Description
This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impracticalSet includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws
The ribs on the plastic anchors prevent the anchor from turning in the hole during installation
The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer
These toggle bolts are anchors for use in hollow walls and hollow masonry applications
Package includes:
#4 - 6 x 7/8" Plastic Ribbed Anchor (Yellow)....................................35 Pieces
#10 - 12 x 1-1/4" Plastic Ribbed Anchor (Blue)................................15 Pieces
#12 - 16 x 1-1/2" Plastic Ribbed Anchor (Green)...............................7 Pieces
#6 x 1" Pan Head Combo Sheet Metal Screw...................................35 Pieces
#8 x 1-1/4" Pan Head Combo Sheet Metal Screw.............................15 Pieces
#10 x 1-1/2" Pan Head Combo Sheet Metal Screw............................7 Pieces
3/16 x 2" Toggle Bolt Screw.............................................................4 Pieces
Toggle Bolt Wings...........................................................................4 Pieces
1/8" SD Hollow Wall Anchor.............................................................4 Pieces
Total: 122 Pieces
14. Hard-to-Find Fastener 014973264895 Short Hollow Wall Anchors, 1/8-Inch, 16-Piece
Feature
Diameter: 1/8 inchMaterial: steel
Finish: zinc
Head style: pan
Drill size: 5/16 inches
Description
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.15. Hilitchi 200 Pieces 2 Size Plastic Self Drilling Drywall and Hollow-Wall Anchors with Tapping Screws Assortment Kit
Feature
High-quality Plastic Self Drilling Drywall Anchors with Screws KitPre-drills precise hole in gypsum wall board - No hole preparation required, Constructed from durable plastic to last for years. Can be easily removed
Large-Threaded design locks into all sizes of drywall (", ",") for maximum holding power
Package quantity: 200pcs, Including 50pcs Large Anchors, 50pcs Mini Anchors, 50pcs 81'' screws, 50pcs81-1 / 4'' screws.
Material: Plastic, 304 Stainless steel (Not low quality iron screw)
Description
High-quality Plastic Self Drilling Drywall Anchors with Screws KitPre-drills precise hole in gypsum wall board - No hole preparation required, Constructed from durable plastic to last for years. Can be easily removed
Large-Threaded design locks into all sizes of drywall (", ",") for maximum holding power
Package quantity: 200pcs, Including 50pcs Large Anchors, 50pcs Mini Anchors, 50pcs 81'' screws, 50pcs81-1 / 4'' screws
Material: Plastic, 304 Stainless steel (Not low quality iron screw)
Large Anchor Maximum Bear Weight: 50lbs
Mini Anchor Maximum Bear Weight: 35lbs
16. Topzone Heavy Duty 1/8" inch 38mm Zinc Plated Steel Hollow Drive Wall Anchor w/ Screws (60)
Feature
Hollow wall drive anchors do not require pre-drilling - drive into walls in secondsZinc Plated Steel
1/8" Diameter
38mm Length
For 1/2" inch wall thickness
