If you looking for led flasher module then you are right place. We are searching for the best led flasher module on the market and analyze these products to provide you the best choice.
Reviews
1. Novita Lighting Control Module (LM470)
Feature
LED compatibleAssembled in USA
DOT compliant
Conforms to applicable FMVSS and SAE standards
Description
The Novita LM470 is an electronic lighting control module that is capable of controlling turn signal and hazard functionality in your vehicle. The Novita LM470 is compatible with popular LED upgrades and modifications.2. Novita LM487 Flasher
Feature
12 Volt ApplicationsLED Compatible
10 terminals
5 Turn / 10 Hazard + Accessories 300 Watt max
Made in the USA
Description
Automotive Lighting Control Module3. 4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
Feature
Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb.Solution for Fast Turn Signal Blinking response after installing SMD LED light bulb.
Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic.
Installation is easy. Just connect the wires with the splice taps provided. For long-wire version, please search item B00VCSRI4A
Each LED bulb installation requires one resistor connected in parellel (see picture below for instruction)
Description
Package Include: 4Pcs (2 Pairs) 50W 6 ohm Load resistors with 8Pcs T-Taps. Please do your research before purchase about what kind of load resistors you need for your car: 3ohm, 6ohm or 9ohm. Those are 50W 6ohm resistors.4. Rigid Industries (40312) 3 Amp 12V LED Flasher
Feature
7 Modes3 Amps
12V DC
2 Output
Description
This 3A flasher module provides seven flashing options for your LED lighting components. It is easy to install and works off of the auxiliary switch to your lights. This model features the following modes: 1 - Single Simultaneous: Both sides flash once simultaneously, followed by a short pause. 2 - Double Simultaneous: Both sides flash twice simultaneously in quick succession, followed by a short pause. 3 - Quad Simultaneous: Both sides flash four times simultaneously in quick succession, followed by a short pause. 4 - Alternating: Alternates flashing once per side. 5 - Alternating (variable speed): Same as mode 4, but at multiple speeds. 6 - Simultaneous (variable speed): Same as mode 1, but at multiple speeds. 7 - Random: Randomly cycles through all previous modes. This model is specifically designed to be installed into a 12V electrical system only.5. "Purishion 2x 24W Flash Strobe Controller Flasher Module for LED Brake Light Tail Stop Light 12-30V "
Feature
Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,FXC flasher can solve this shortcoming very well.This small block controller enhance your brake light function with 2 patterns,when braking: 1. fast-blinking 4 times , 2. slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light.
Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights.
Complete sealed technology make it waterproof, short circuit prection.
Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.Enjoy 1 year quality warranty under regular use. Offering customer technical service, feel free contact us for technical, installation and use question.
Description
Specification:1. Item: Strobe controller
2. Brand: FXC
3. Model No.:
4. Size: 49*26*13mm
5. Suitable for: All cars with 12V.
6. Voltage: 12V
7. Working tempreture: -40-50
8. Storage tempreture: -50-80
Installation:
Input: red wire for positive, black wire for negative
output: red wire for positive, black wire for negative
Package:
2x strobe controller
6. Flash Strobe Controller, EFORCAR Flasher Module for LED Brake Light Tail Stop Light Auto Car 12-16V LED Brake Flasher Stop Light Lamp Flash Strobe Flasher
Feature
SAFTY DRIVING: Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue, EFORCAR flasher can solve this shortcoming very well.EASY TO INSTALL: Wide boltage 12V - 24V DC, suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights.
WIRE CONNECTION: Black wire-negative Pole; Red wire-positive Pole
WATERPROOF: Complete sealed technology make it waterproof, short circuit prection.
WARRANTY: 1 year guaranty! Just contact us if you have any technical, installation or use question. We promise we will solve your problem at last;
Description
DescriptionCan alert the vehicles behind you to stop
Can prevent rear-end collision Suitable for all 6-24V brands and models
Compatible with all types of brake lights including LED clusters
Relay dimension: 5*2.8*1.5CM
Black wire -- Negative Pole; Red wire -- Positive Pole
Input: 12-16V
Output: 12V
Package included:
1 x Flasher module
7. uxcell® Car Vehicle 3 Pin LED Turn Blinker Light Flasher Relay 12V DC 0.02-20A
Feature
Product Name : LED Flasher;External Material : Plastic, MetalColor : Black;Flasher : Voltage: 12V DCCurrent; 0.02-20A
Terminals Number : 3 Terminals;Size : 30 x 30 x 30mm/1.2" x 1.2" x 1.2" (L*W*H)
Weight : 25g
Package Content : 1 x LED Flasher
Description
This is a 3 Terminals DC 12V LED Flasher Relay. Suitable for Turn Signal, Blinker Light.This will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard.
8. 3-Pin CF-13 Electronic Flasher Relay Fix For LED Turn Signal Light Bulbs
Feature
1 piece3-Pin (CF13JL-02)
Operating Voltage: 11V-15V
Compatible with Japanese vehicles only
Description
This page features for a piece of 3-pin Electronic Flasher Relay Fix for LED
Turn Signal, Blinker Light Bulbs.
This will solve LED related turn signal problems such as rapid flashing, not
flashing, or bulb burnt out warning on dashboard. These are designed for most
3-pin Japanese configurations. Simple Plug N' Play.
Important Information about the LED Flasher: The LED flasher does not replace all flasher relay. Before ordering, please make sure the 3-pin configuration is the same as your vehicle's. You can usually find your flasher pin out printed right on your flasher. Failure to check this and installation in an incompatible vehicle can blow your fuse, destroy the flasher and void the flasher warranty.
9. iJDMTOY (1) 5-Pin EP27 FL27 Electronic LED Flasher Relay Fix For LED Turn Signal Bulbs Hyper Flash Fix
Feature
LED electronic flasher relay fix for turn signal blinker lights to fix hyper flash problemsOperates at 12V plus has a easy plug-n-play installation
Dimensions: 1.2" x 1.2" x 1.5" - please check to make sure size is compatible, as this flasher relay may be larger than its original counterpart
Designed for 1994-2009 Buick, Chevrolet, Chrysler, Dodge, Ford, Jeep, Lincoln, Mazda, Mercury, Oldsmobile, Plymouth and Pontiac (Note: Does not fit Jeep Grand Cherokee)
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
This page features for a piece of 5-pin EP27 LED Electronic Flasher Relay Fix for the turn signal blinker lights.
Please note that this LED flash will only fix the LED bulb's hyper flash issue, not the wattage lower than stock bulb related "bulb out" warning message on dashboard.
This EP27 is an electronic turn signal flasher that operates at 12 V. The EP27 is an application specific flasher that is designed for 94-09 Buick, Chevrolet, Chrysler, Dodge, Ford, Jeep, Lincoln, Mazda, Mercury, Oldsmobile, Plymouth and Pontiac (Note: Does not fit Jeep Grand Cherokee) with a simple plug and play installation.
Connection Instructions
Replace the stock relay in the fuse box.
Fit
96-98 Buick Skylark
96 Chevrolet Beretta, 96-05 Cavalier, 96 Corsica
01-02 Chrysler Prowler
98-00 Dodge Dakota, 99-00 Durango, 98-02 RAM 1500, 98-02 RAM 2500, 98-02 RAM 3500, 98-02 Viper
07-11 Ford Crown Victoria, 10-11 Crown Victoria LX, 07-10 Edge, 00-05 Excursion, 97-11 Expedition, 95-10 Explorer, 97-08 F150, 97-10 F250/F350/F450 Super Duty, 05-07 Five Hundred, 04-07 Freestar, 05-07 Freestyle, 05-06 GT, 94-04 Mustang, 95-11 Ranger, 05 Taurus, 08 Taurus X, 95-03 Windstar
97-01 Jeep Cherokee
03-05 Lincoln Aviator, 02 Lincoln Blackwood 2WD, 07-10 Lincoln MKX, 06-08 Lincoln Mark LT, 98-12 Lincoln Navigator, 10-12 Lincoln Navigator L, 04-11 Lincoln Town Car
01-09 Mazda B2300, 98-01 Mazda B2500, 98-07 Mazda B3000, 98-09 Mazda B4000
07 Mercury Grand Marquis, 07-11 Mercury Mariner, 04 Mercury Monterey, 97-10 Mercury Mountaineer, 05 Mercury Sable
96-98 Oldsmobile Achieva
00-01 Plymouth Prowler
96-98 Pontiac Grand Am, 96-05 Pontiac Sunfire
(Note: Does NOT fit Jeep Grand Cherokee)
10. Novita EP27 Flasher
Feature
12 Volt applications, LED compatible5 terminals (B, E, H, I, L)
162 Watt / 13.5 Amp max
For 1 to 6 Lamps
Description
Tridon EP27 Flasher11. Ronben Car Auto LED Flashing Light Strobe Controller Flasher Module 2 Ways
Feature
1. Working voltage: 12V DC 2. Max. power: 12V/48W 3. Working temperature: -40 to 50 Celsius4. Dimension: 46x28x13mm 5. Housing Material: black ABS 6. Flash modes: a. long light mode
b. 4 group lights flash alternately c. 12 group lights flash together d. alternately flash e. 3 group lights quick flash alternately
f. 4 group lights flash together g. 4 group lights flash alternately fisrt, then flash together h. all lights flash alternately and off i. all lights flash alternately and off, then flash and off together j. all lights flash and off together
Small in size, easy to operate, convenient to install Up to 10 flash modes, support various LED products connection Can observe outside flash modes when you are inside
Description
Description1. Fix this strobe controller in car
2. Touch its switch to change flash modes, long press 1.5 second to shut down
3. If the indicator doesn't work, please check the wire connection first and then fuse inside of the box.
Attention:
1. Working voltage: 12V DC
2. Max. power: 12V/48W
3. Working temperature: -40 to 50 Celsius
4. Dimension: 46x28x13mm
5. Housing Material: black ABS
6. Flash modes:
a. long light mode
b. 4 group lights flash alternately
c. 12 group lights flash together
d. alternately flash
e. 3 group lights quick flash alternately
f. 4 group lights flash together
g. 4 group lights flash alternately fisrt, then flash together
h. all lights flash alternately and off
i. all lights flash alternately and off, then flash and off together
j. all lights flash and off together
Using method:
1. Connect cable with strobe controller. In order to prevent poor contact, please connect the cable carefully.
2. About the red & black cable (about 1.2m length): connect the red cable with positive electrode of power, and black cable with negative electrode.
3. About black white & black cable (about 3m length), 2 pcs, black white cable connect with light positive electrode, and black cable with negative electrode.
4. Turn on the input power, press strobe controller MODE button for 2 to 3 seconds to launch this controller. Short press MODE button to change flash modes.
5. Avoid water and solarization With fixed sticker for the strobe controller and LED indicator on the controller
This is 2 way strobe controller
Package include:
1 x Strobe controller
1 x Cable bundle
1 x Paster
