If you looking for metal roofing tools then you are right place. We are searching for the best metal roofing tools on the market and analyze these products to provide you the best choice.
Reviews
1. Malco ER3 Three-Station Edge Roller
Feature
Exclusive 3-Station roller designQuickly adjusts
Adjusts for making curved bends
Description
The 3-Station Edge Roller (ER3) has the exclusive 3-station foller design assuring a uniform bend along the entire length of the material. Outer rollers may travel off material and easily back on to complete the bend because two roller stations can remain aligned on the edge of the material. The ER3 quickly adjusts to make 5/8" to 4" bends in 29 - 22 gauge steel.2. Channellock 909 Crimping Tool with Cutter
Feature
Cuts and crimps 10-22 AWG wireDesigned for crimping of both insulated and non-insulated solderless connections and terminals
Laser heat-treated edges last longer
High-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
Made in the USA
Description
The Channellock 909 9-1/2-Inch Crimping Plier has a sleek nose design gets into tight places and a laser heat-treated mating edge makes this the only crimper you'll ever need. Perfect for both insulated and non-insulated solderless connections and terminals.3. IRWIN VISE-GRIP Original Locking Sheet Metal Tool, 8", 23
Feature
Makes bending, forming, and crimping sheet metal easierTurn screw adjusts pressure to fit work
Constructed of high-grade heat-treated alloy steel for durability
Classic trigger release designed to provide maximum locking force
Stays adjusted for repetitive use
Description
The IRWIN VISE-GRIP Original Locking Sheet Metal Tool, 8", makes bending, forming, and crimping sheet metal easier than ever. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability, this metal bender also features the original locking mechanism that made VISE-GRIP famous. A turn screw adjusts pressure to fit work, and stays adjusted for repetitive use while the classic trigger release delivers maximum locking force. Backed by the IRWIN Lifetime Guarantee.4. BLACK+DECKER BDCI20C 20V MAX Lithium Impact Driver
Feature
High Performance Transmission delivers 1375 in-lbs of max torqueQuick Release 1/4" Hex Chuck
Compact & Lightweight for ease of use
Maximum initial battery voltage measured without a workload is 20 volts and nominal voltage is 18
Description
The BLACK+DECKER BDCI20C 20v MAX Lithium Impact Driver features a high performance transmission that delivers 1375 in-lbs of max torque (determined by 30 second impact load gauge test method). This driver has a quick release 1/4" hex chuck. This unit offers variable speed, operates at 0-3000 rpm, and 0-39000 BPM. The BDCI20C Impact Driver is compact & lightweight for ease of use for all types of jobs. Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Includes: (1) BDCI202 Impact Driver, (1) 20v Max Battery, (1) Charger, (1) Screwdriving bit.5. Malco TSCM Corrugated Metal Turbo Shear
Feature
Attaches to a drill or impact driver you already ownMake fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns
360 degree rotating head for optimum tool clearance and material flow
Able to cut curves and straight lines
Made in the USA
Description
The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 - 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB6. Damaged Screw Extractor Set - Remover Set by Aisxle - Easily Remove Stripped or Damaged Screws - Set of 4 Stripped Screw Removers
Feature
Your damaged screw remover set is backed by our Highest Quality Promise.The 4 piece screw extractor set works with any drill and any screw size or bolt.
Easy removal of rusted, free-spinning screws and deck screws.
Highest quality, competitors cant compete with our triple guarantee.
Easy to use, just two easy steps! An essential part of every tool kit box.
Description
Damaged Screw Remover and Extractor Set by Aisxle
The #1 Damaged Screw Remover and ONLY Set Sold With a Lifetime Guarantee!
Find out why our 4 piece remover and extractor was voted #1 "Best Consumer Buy" and how you're protected by our triple guarantee.
1 Serrated extracting end of tool bites into damaged screw head. You can now easily remove the most stubborn hard to remove screws. Great for stripped, broken, stuck or damaged and screw removal. Made from hardened tool steel and tempered twice for extra hardness and a lifetime of use. The 2 in 1 drill bit and extractor in one tool extracts fasteners fast; Compatible with quick chuck systems or chuck directly into drill. Note: these bits are not for commercial screw removal.
1# Remove Diameter 3~5mm
2# Remove Diameter 4~8mm
3# Remove Diameter 5~10mm
4# Remove Diameter 6~12mm
Package Included:
1 x Set of 4 Aisxle Damaged Screw Remover
Warranty
All Aisxle items are backed by a Limited Lifetime warranty. Please contact us via email if you have any questions.
7. Gino Development 01-0101 TruePower 18 Gauge Heavy Duty Electric Sheet Metal Shear Tin Snips Cutter Nibbler
Feature
SPEED: 1800 SPM (no load); cuts up to 150 in. Per minute in 24 gauge mild steelMaximum cutting capacity: 18 gauge mild steel, 22 gauge stainless steel
Includes: metal Shears, cutting blades, hex key, spare carbon brushes, instruction Manual
Description
This 18-gauge metal Shear features 120V/60Hz and 3.5 amps. Great for auto body work or any other metal cutting project, this metal Shear makes smooth and clean cuts in aluminum, plastic or sheet metal as thick as 18 gauge. 1-Year warranty.8. Malco DEFT High Leverage Drip Edge Folding Tool
Feature
Makes up to 1-1/2 inch deep bends along drip edge in roofing panelDurable lightweight steel and aluminum construction
Weather resistant finish
Works on installed panels or on a workbench for pre-bending panels
Made in the USA
Description
Versatile, compact 24-inch (61cm) drip edge folding tool makes quick bends along the drip edge of flat-pan standing seam metal roofing panels. Two rib-reinforced steel plates are permanently welded together to create two folding seams for making 1-inch (25.4 mm) and 1-1/2-inch (38.1 mm) deep bends in maximum 22-gauge (0.76 mm) steel. A two-post-design, fiberglass reinforced nylon handle offers durable, lightweight strength and high leverage for working overhead or on a bench.9. (20) PLASTIC CLEAR Roof Ice Guard Snow Guard Snow Stops for Standing Seam Metal Roofing
Feature
(20) TWENTY Pack of Snow and Ice guard designed to keep snow and ice off metal roofs.These strong and durable guards will protect your property and people from injury and liability claims from injury.
These Roof guards are made for standing seem metal roofs. Simply attach with the 2 stainless set screws. No drilling required .
Quanity : 20
Color :CLEAR
Description
(20) TWENTY Pack of Snow and Ice guard designed to keep snow and ice off metal roofs. These strong and durable guards will protect your property and people from injury and liability claims from injury. These Roof guards are made for standing seem metal roofs. Simply attach with the 2 stainless set screws. No drilling required.Quanity : 20
Color:CLEAR
Material: Poly-Carbonate
Dimensions:
Width: 5 Inches
Length: 2 1/2 Inches
Height: 3 Inches
Slot Width: 9/16
Slot Height 15/16
Bulk order discounts are available, please contact us for pricing.