If you looking for parallel charging board then you are right place. We are searching for the best parallel charging board on the market and analyze these products to provide you the best choice.
Reviews
1. AKK XT60 Lipo LiFe Li--ion Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6 B6AC (Includes 2 pcs XT60 Female to Deans T Plug Male Connectors)
Feature
Used for Parallel charging 1-6 batteries (including LiPo, LiFe and Lion)Save time:1.avoid replacing the battery repeatedly; 2.charge time: 6 batteries=1 battery
40A Fuse, Short circuit protection
Copper foil thickness: 20Z, sustainable resistance to flow 80A
Improve the balance charge efficiency, prevent single battery to overcharge, the charging cycle is greatly reduced with the use of time
Description
AKK 2-6s XT60 Parallel charging board, with 2XT60 Female to Deans T Plug Male Connector
Specification:
Connector: 6 XT60 (1 T-Plug used to connect other same charging boards)
Max current: 30A
Fuse: 40A
Copper foil thickness: 20Z, sustainable resistance to flow 80A
Cell: 2~6S
Battery: 6 packs (same discharge state and amp; cell count)
Voltage: 0~22.2V DC
USE STEPS
1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board.
2. Connect the power port of Parallel charging board to the output port of balance charger
3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs.
Package Includes:
1 x AKK 2-6s Parallel charging board
2 x XT60 Female to Deans T Plug Male Connector
1 xConnect Cable
1 x User Manual
2. XT60 Parallel Charging Board for 3S 4S LiPo Batteries XT60 Connector with XT60 to Banana Connecting Cable
Feature
Supports up to four packs of the same type, same cells 3-4S battery packBalanced port output line with 14AWG multi-strand silicone line
Equipped with safety protection XT60 plug silicone cap
High-quality gold-plated connectors
Thicken PCB copper foil, allow security using 20A charging current.
Description
XT60 Parallel Charging Board for 3S 4S LiPo Batteries XT60 Connector with XT60 to Banana Connecting CableSpecifications:
Item:3-4S Parallel Charging Board
Balance Output Cable: 14AWG silicon cable
Current: Support MAX. 20A charge current
Support 4 packs 3S or 4 packs 4S
Features:
1. Supports up to four packs of the same type, same cells 3-4S battery pack.
2. Balanced port output line with 14AWG multi-strand silicone line.
3. Equipped with safety protection XT60plug silicone cap.
4. High-quality gold-plated connectors.
5.Thicken PCB copper foil, allow security using 20A charging current
6. Equipped with 30A fu-se between any two groups of batteries, to prevent line burned due tothe largebattery pressure.
7.Contains the battery voltage display function
8.Weight: 85g
Package Including
1 * XT60 Parallel Charging Board for 3s 4s LiPo Batteries
1 * XT60 to banana Connector
2 * Number Sticker
3. Paraboard - Parallel Charging Board for Lipos with JST Connectors
Feature
Charge and balance up to six lipo batteries at a time, spend more time running your vehicle!Features JST/BEC for main leads and JST-XH balance plugs ranging from 1S to 3S same as E-flite, Turnigy and 95% of other lipos.
Compatible with the vast majority of 6S lipo battery chargers (paraboard only supports 1S, 2S, and 3S batteries)
Also available with Traxxas, EC3, EC5, XT60 or Deans-type plugs.
Please Note: Batteries wired in Parallel must be same chemistry and cell count, also within 0.1 volts per cell to each other.
Description
This Paraboard lets you charge and balance up to six lipo batteries at once! This board features JST/BEC plugs for your batteries' main leads and JST-XH balance plugs ranging from 1S to 3S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing. Battery packs that are connected in parallel must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting batteries to the Paraboard.Caution: Be sure to charge only batteries of the same voltage and cell count at the same time (2S with 2S, 3S with 3S, etc.). Connecting batteries of different cell counts to the Paraboard at the same time will result in immediate damage to your batteries and the Paraboard and may result in fire. Charging batteries of different capacities together (for example, one 11.1V 2200mAh battery and one 11.1V 5000mAh battery) is ok, but the voltage of all batteries must be the same.
4. Paraboard Parallel Battery Charging Board Plate for LiPo with T Dean Plug Connector for imax B6 B6AC UN-A6 charger Adapter Expansion Board
Feature
Charge and balance up to six battery packs simultaneously without a clutter of wiresFeatures T Dean plugs for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S.
Pls do not spend all day charging your batteries one at a time!
Plugs right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing
A great choice for rc helicopters or scale airplanes
Description
2S-6S Lipo Parallel Charging Board Balance / Charging Plate T-plug
Features:
1.balanced output lines using 20AWG stranded silicone line.
2.main output lines using high quality silicone 14AWG stranded wire.
3.T plug of silica gel with a safety cap.
4.high-quality output plugs.
5.Thick copper PCB to allow safe passage of 30 amps charging current.
Specification:
Cell: 2~6S
Battery: 6 packs same capacity & cell count
Connector: T Connector
Net weight:138g
Package weight:158g
Package includes:1 x Parallel charging plate
1 x Balanced cable(7-pin balance ports)
5. Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Feature
Output Connector: 6x Micro JST 1.25; 6x JST-PH 2.0Board size: 62.5x32x5mm, Weight: 17g (0.6ounces)
Charge 6 batteries at the same time, keep your tiny whoop staying in the air
Input Charge Connector: Male 4mm Banana Plug, it needs to connect to LiPo charger for charging battery
Suitable for battery of Blade Inductrix, Glimpse, mCP X, Nano QX 3D, Nano CP X, Nano QX etc
Description
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect PlateSpecifications:
Input Charge Connector: Male 4mm Banana Plug
Output Connector: 6x Micro JST 1.25; 6x JST-PH 2.0
Wire Type: 18 AWG Charge Lead
Max Charge Rating: 1.5A per battery
Fuse Rating: 1.5A
Board size: 62.5x32x5mm
Weight: 17g
It needs to connect to A LiPo charger for charging battery
Suitable for battery of Blade Inductrix, Glimpse, mCP X, Nano QX 3D, Nano CP X, Nano QX etc
*Micro JST 1.25 AKA Ultra Micro JST, mCX, Pico, Molex 1.25 etc.
*JST-PH 2.0 AKA High Current Ultra Micro, mCPX, Powerwhoop etc.
Package Including
1 * 1S LiPo Battery Charging Board Parallel Plate
6. nidici XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6AC 720i Lithium Batteries Charger Part
Feature
This lipo balance board lets you charge and balance up to six lipo batteries at the same time.The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one.
Features XT-60 for your batteries main leads and JST-XH balance plugs ranging from 2S to 6S,It can prevent each cell overcharge, so it can improve the balance efficiency. And the later period of the balance charging cycle is shorted substantially.
This lipo balance board is used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel.
The lipo balance board can protect each cell when overcharge or short circuit happens.
Description
2-6s XT60 Parallel charging board, with 2 XT60 Female to Deans T Plug Male ConnectorSpecification:
Connector: 6 XT60; 1 T-Plug
Max current: 30A
Cell: 2~6S
Battery: 6 packs (same discharge state andamp; cell count)
Voltage: 0~22.2VDC
USE STEPS
1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board.
2. Connect the power port of Parallel charging board to the output port of balance charger
3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs.
Package Includes:
1 x 2-6s Parallel charging board (6 XT60 and 1 T-Plug)
1 x Connect Cable
1 x User Manual
7. Aiskaer XT60 Parallel Balanced Charging Plate Charging Board for imax B6 B6AC UN-A6 charger,Rechargeable Lipo Lithium Battery Adapter Expansion Board
Feature
Used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallelBuilt-in short circuit protection,Prevent each cell when overcharge or short circuit happens
The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one
20Z of thick copper foil sustainable resistance to flow 80A
A great choice for DJI Phantom owners.Connector Type: XT60 Connector
Description
About the product:
This product is used for simultaneously charging multiple lithium batteries(including LiPo,LiFe,and Li-ion types) in parallel,Convenient to charge and balance up to six lithium batteries at the same time when used with a balance charger,The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one,It can significantly accelerate battery charging speed.
Product Features
Color: Black + yellow
Product size: 2.8 inches X 4.8 inches
Cell: 2-6S
Voltage: 0-22.2VDC
Max current: 30A
Weight:0.4 lbs
Connector Type :XT60 Connector
Package Includes:
XT60 Connector Parallel Charging Board x 1
Balance Cable x 1
8. Crazepony XT60 LiPo Battery Balance Charging Board 2-6S Parallel Connect Plate
Feature
Cell: 2-6SVoltage: 0~22.2V DC
Max current: 40A
Battery: 4 packs (same discharge state cell count)
Connector: XT60
Description
XT60 LiPo Battery Balance Charging Board 2-6S Parallel Connect PlateThis parallel balance board allows you to charge four battery packs simultaneously, drastically reducing charge time! The battery packs being charged in parallel need to have the same cell count and be in a similar state of discharge (within 0.2V).
That means you can charge four 3S 2200mAh or more at the same time with a standard charger!
A unique feature of this board is the ability to /daisy chain/ it with others. There is a set of 4mm bullet jacks on the end and a balance plug connection allowing you to connect another parallel board to it. This means you can connect multiple boards together with different plug types to charge all of your same cell count batteries simultaneously!
The Safe 40A parallel charge board features replaceable automotive style protection to protect each circuit, this will insure safe charging at up to 40A.
Specs:
Cell: 2~6S
Voltage: 0~22.2VDC
Max current: 40A
Battery: 4 packs (same discharge state andamp; cell count)
Connector: XT60
Package Including
1 * XT60 LiPo Battery Balance Charging Board Plate 2-6S
1 * Connecting Wire
9. Paraboard - Parallel Charging Board for Lipos with EC3 Connectors
Feature
Don't spend all day charging your batteries one at a time!This Paraboard lets you charge and balance up to six lipo batteries at once!
Features EC3 plugs for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S.
Plugs right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing
Works with lipos for Blade 350 QX and 450, Parkzone T-28 Trojan, F-27Q Stryker, Extra 300, Spitfire, and F4U-A1 Corsair
Description
This Paraboard lets you charge and balance up to six lipo batteries at once! This board features EC3 plugs for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.Caution: Be sure to charge only batteries of the same voltage and cell count at the same time (2S with 2S, 3S with 3S, etc.). Connecting batteries of different cell counts to the Paraboard at the same time will result in immediate damage to your batteries and the Paraboard and may result in fire. Charging batteries of different capacities together (for example, one 11.1V 2200mAh battery and one 11.1V 5000mAh battery) is ok, but the voltage of all batteries must be the same.
10. Jrelecs Xt30-plug Parallel Li-po Charging Adaptor Board for 1S,2S,3S LiPo Batteries Compatible with 6pcs XT30 to JST Cable
Feature
High-quality XT30 connectors, with free Six XT30 to JST connector charge cablesIt has thick copper foil, so it can withstand continual current of 20A.
It can protect the charging batteries when short circuit happens.Equipped with 30A fuse protection between any two groups of batteries, to hadle the large battery pressure.
Charge and balance up to 6 lipo batteries at once.Support 6 packs XT30 2S or 3S LiPo batteries balance charge, support JST-PH 2.0 1S batteries additionally
Description
Note: Batteries being connected to the Parallel Board MUST have the same cell count / voltage. They can have different capacity and discharging rate. But the Voltage must be the same.Item: Jrelecs XT30 Parallel Charging Board
Plug: XT30 Plug
Current: Support MAX. 20A charge current
Support 6 packs XT30 2S or 3S batteries balance charge, support JST-PH 2.0 1S batteries additionally.
Features:
Support 6 packs XT30 2S or 3S LiPo batteries balance charge, support JST-PH 2.0 1S batteries additionally
High-quality XT30 connectors, bonus three XT30 to JST connector cables
It has thick copper foil, so it can withstand continual current of 20A.
Package Including
1 * Jrelecs XT30 Parallel Charging Board for 1S 2S 3S LiPo Batteries
6* XT30 to JST Cable
11. iFlight Parallel Balanced Charging Board XT60 Plug Support 6 Packs 2S-6S Lipo for Imax B6 / B8 / UN-A6 RC Battery Charger
Feature
Support 3 parallel charging boards for combined use to charge 18pcs batteries with the same nature simultaneouslyCan charge 6 pack same capacity batteries at the same time
Balanced port output line with 20AWG multi-strand silicone wire,Main input line with 14AWG silicone wire,High Temperature Resistant
Thicken PCB copper foil, allow security using 30A charging current
Coming with short circuit protection function (with 40A fuse) and high quality AMASS Output plug
Description
iFlight Parallel Balanced Charging Board XT60 Plug Support 6 Packs 2S-6S LipoSpecifications:
Item: Parallel Charging Board
Plug: XT60 Plug
Balance Output Cable: 20AWG silicon wire
Main Input Cable: 14AWG silicone wire
Current: Support MAX. 30A charge current
Support 6 packs 2S, 6 packs 3S, 6 packs 4S, 6 packs 5S, 6 packs 6S balance charger
Features:
Can be used with all kinds of chargers( IMAX B8, UN A6, etc.) with balanced interface to provide balance charge less than 6 lithium batteries
(6 batteries of 2S, 3S, 4S, 5S, 6S) that have same cells at the same time, which can avoid the trouble of replacing the battery repeatedly.
The overall voltage is more balanced and the difference of average voltage is smaller after the individual cells have balanced.
Compared with 6 times balance of single charge, once balance can shorten the charging time greatly,
which has 6 times charging current and only needs 1/6 charging time with 6 battery packs in parallel.
Can avoid overcharge of single battery to improve the balance efficiency and balance the charging cycle.
Perfect support most common balanced charger,such as IMAX B6 / B8 / UN-A6
With 20Z-thick copper foil, so it can withstand continual current of 80A.
Package Included
1 x Parallel Charging Board
1 x Balance Cable
