If you looking for podcasting mic xlr then you are right place. We are searching for the best podcasting mic xlr on the market and analyze these products to provide you the best choice.
Reviews
1. Condenser Microphone for PC, SOONHUA Professional Recording Microphone 3.5mm Studio Microphone with Shock Mount for Podcasting, Youtube, Interview, Video Conference, Voice Dictation
Feature
Cardioid Polar Pattern:The cardioid microphone picks up sounds from the front side while minimal noise that comes from the rear side is captured. This solar pattern allows the MIC to maintain isolation and prevent feedback.Excellent Sound quality: This professional condenser microphone has good-quality voice and outstanding recording performance.The fan-shaped steel mesh outside and the built-in anti-wind foam enable the mic to pick less noise and pops during recording vocals.It adopts high quality condenser microphone chip and noise reduction technology which aim at increasing sensitivity to pick up a full texture of sound and filtering out background noises for getting swarm, rich,clear and loud audio.
Great in Both Vocal and Instruments: It is the best choice to recording vocals, radio broadcasting,and podcast.It also works well with musical instrument,including piano,violin,guitar,drums,etc. It not only suits for studios, recording studios, broadcasting stations,but also ideal for live performance.
Adjustable Shock Mount:Made of solid material,this shock mount could be adjusted to the angel you need.This sturdy and well-constructed mount also reduces the trill caused by vibration effectively.
Protective Foam Cover: The foam cap prevents wind noise and pops during recording vocals,keeping your mic from picking up background noise.The windscreen shields your mic from bumps and also protects your mic away from dust, dirt, debris and moisture.
Description
This condenser microphone is a high quality 3.5mm studio microphone with shock mount professional recording microphone, wide compatibility, beautiful appearance design, can work perfectly with your device.Note:
1.The instrument condenser microphone only works with the device that could provide enough power (Voltage Required:5V) for it.
2.When the microphone connected with desktop computer, it could be used alone (When connected to professional sound card, the recording effect is better)
3.When the condenser microphone connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.
4.The sound volume recorded might be low, if your device could not provide enough power (when used with Amplifier or Mixer, etc.), and please use a extra 48V phantom power adapter to connect it. (phantom power adapter is not included).
5.The microphone can not be used with mobile phone and tablet computer without using one sub-2 converting Cable. It also can not work with Mac OS without professional sound card.
6.If a sound card used, sound effect will be better
7.While recording, please put the microphone away from the amplifier to prevent recording noise.
Specification:
Polar Pattern: Cardioid
Frequency Response: 20Hz~20KHz
Sensitivity: -37dB2dB
Output Impedance: 15030%
Load Impedance: 1000
Equivalent Noise level:16Dba
Maximum Sound Pressure Level: 135dB(THD1.0% at 1KHz)
Product Size: 195mm x 60mm x 45mm approx.
Package Includes:
1x Condenser microphone
1x Shock mount stand
1x Foam Cover on mic
1x 3.5mm male to XLR female cable
1x 3.5mm 2-in-1 Y-shaped converting cable
1x User manual
2. Comica XLR Microphone CVM-V02O 2 Pack 5.9ft Phantom Power Omni-directional Lavalier Lapel Microphone for Canon Sony Panasonic Camcorders ZOOM H4n H5 H6 Tascam DR-40 DR-60D DR-70D DR-100 Recorders
Feature
Low Distortion Flat frequency response for perfect sound output, retains original voice quality, without making voice sound robotic and mechanical.Advanced TechnologyMade by accurate CNC processing technology, metal mic for super shielding.
No Batteries RequiredUsed on +48V Phantom Power. This microphone works with Canon Sony Panasonic Camcorders ZOOM H5 H6 TASCAM Audio Recorders.
Durability and Adjustability 5.9-foot soft silicone wire for comfortable touch feeling and easy to adjust. you can walk around without unplugging the mic and record authentic and clear sound at the same time.
Omni-directional Xlr Lavalier MicrophoneThis microphone has equal sensitivity at all angles. This mic will pick up sound from all directions. Lavalier microphone with XLR(3-pins) Connector,ideal for Youtube podcasting, home studio recording, field recording, gaming, speech, vocal, conference calls, interview and more. (1 Year Warranty).
Description
Size:OmnidirectionalCOMICA CVM-V02O2 XLR Lavalier Microphone is specially designed for camcorder, with omnidirectional and built-in metal MIC, it can pick up sound from all around filtering the unwanted noise.And it's also supports 48V phantom power, so do not need batteries. Flat frequency response brings you broadcasting sound quality.Soft silicone wire and simple lapel clip make it easy to operate and convenient to carry.Notice1. Please carefully read the user manual before using;2. Please respectively connect the 3 pins with the camcorder's socket, make sure they are connected in the right way.3. This product belongs to high-precision instruments, please avoid falling, collision or pounding;4. Do not use this equipment in the vicinity of heat source or interference source, such as radiator, oven, refrigerator or air conditioner, etc;5. Please keep the product in a dry environment;6. Do not expose the equipment in rain or in a damp environment, otherwise there will be a risk of short circuit;Main features1.Omnidirectional Lavalier Microphone with XLR (3-pin) Connector2.Metal Mic for Super Shielding3.CNC Processing Technology for Comfortable Hand Feeling4. 1.8m Soft Silicone Wire5.48V Phantom Powered - No Batteries Required6.Flat Frequency Response for Perfect Sound Output SpecificationsDirectivity:OmnidirectionalFrequency Range:100Hz~12KHzTHD:1%Sensitivity:35dB3dBSignal/Noise Ratio:60dBPower Source:48V Phantom PoweredDimension:21mm97mmPackage Content1. Microphone body with XLR (3-pin) connector*22. Windscreen*23. Wind muff*24. Warranty Card*23. Mugig Vocal Dynamic Microphone with 20Ft XLR Cable, Cardioid Unidirectional Handheld Microphone, for Performance, Stage, Karaoke, Public Speaking, Recording, Speech, Wedding, Indoor Outdoor Activity
Feature
Mugig Vocal Dynamic Mic with smooth mid-frequency presence rise for excellent voice projection. The high quality moving coil unidirectional dynamic element minimizes background noise and feedback.The MCM1 Vocal Dynamic Mic provides an amazing frequency response of 80 Hz to 14 kHz, Anti-corrosion steel mesh classics shaped grill built-in "pop" filter, minimize breath and pop noises.
Rugged, all-metal construction for maximum reliability, Featuring a 4.5mm zinc die-cast case and Anti-corrosion steel mesh grill with electroplating shockproof ring. Electroplating microphone body engraved Anti-slip noise reduction pattern.
Magnetic switch to avoid switching noise. Gold-plated three-pin socket prevents transmission loss. Providing a 6.35mm plug-in 20Ft microphone cable, Plug and play.
Package Contents: Mugig Vocal Dynamic Microphone, Microphone Cable (20Ft), User Manual, 6 Months Warranty.
Description
This is a dynamic microphone which does not require power supply. When vibrated by sound wave, the diaphragm cuts magnetic lines around the transmitter, and it generate electric current to power the microphone. It is the reason why it called "Dynamic microphone".AKA, Faraday's electromagnetic induction law. A dynamic does not need power supply.
Features:
Dynamic Cardioid microphone giving clear and clean sound.
Single direction pick up mode. Only pick up sound in front of the microphone.
Special transmitter design. The structure of the microphone transmitter has been optimized to obstruct unwanted noise and prevent cracking in the voice.
Excellent sound stability, vigorous response to bass, clear response to mid, and it even has nice performance on high frequencies.
Sturdy, reliable metal construction and electromagnetic shielding.
Specifications:
Type: Dynamic type
Model: M-2
Impedance: 600 30(at 1KHZ)
Sensitivity: -66 3db (at 1KHZ)
Frequency response: 80 - 14000 HZ
Direction: Uni-directional
Operating temperature: -60 - 70
Construction: Sponge ref-shake type
Measure: 28*30.5*38mm
Response curve: AS figure
Package: microphone *1, XLR male to 1/4" Female cable *1, Manual *1
Note:
1.If want to connect the dynamic microphone to a PC or laptop, you will need a sound card and microphone input port to make it work.
2.Most PC and laptops have built-in sound card. If not, you will need a external one.
3.Package includes a XLR male to 1/4" Female cable. If the size does not match, you will need a extra adapter.
4.This dynamic microphone can also be used for sound box. Despite the dynamic does not need power supply, you will still need power supply for sound box.
5.All products we sells can be changed or refunded in six months. if you have any problems. Please feel free to contact us.
4. Audio-Technica AT2005USB Cardioid Dynamic USB/XLR Microphone
Feature
Handheld dynamic microphone with USB digital output and XLR analog outputUSB output connects to your computer for digital recording, while the XLR output connects with your sound system's conventional microphone input for use in live performance
Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording, voiceover, and on-stage use
Built-in headphone jack allows you to directly monitor from your microphone
Adjust headphone volume with easy-to-use controls on the bottom of the microphone
Description
Building on the heritage of the renowned 20 Series line of studio microphones, Audio-Technicas new AT2005USB is an all-purpose microphone designed to take you from the stage to the studio and beyond. This rugged handheld microphone offers two outputs, USB output for digital recording, and an XLR output that connects with a sound systems conventional microphone input for use in live performance. The microphone plugs right into your computers USB port, and functions seamlessly with your favorite recording software. The AT2005USB also offers a quality analog-to-digital converter for excellent fidelity, and a headphone output with level control for monitoring. Its cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear. The microphone is ideal for live performance, podcasting, home studio recording, field recording, and voiceover use.5. Marantz Professional MPM-1000 | Cardioid Condenser Microphone with Windscreen, Shock Mount & Tripod Stand (18mm / XLR Out)
Feature
Entry-level price for recording studio-quality soundIdeal for video commentary and Podcasting projects, or isolating instruments on a crowded stage
Cardioid pattern picks up what's in front without catching echoes, background noise, or other sounds nearby
Large diaphragm condenser microphone with 20 to 20,000 Hz-wide frequency response
Description
If you know what youre doing, you want to sound like it, too.
Marantz Professionals MPM-1000 Studio Series microphone is a high-quality condenser mic that delivers studio-grade audio performance along with unexcelled value.
The MPM-1000 Studio Series microphone exemplifies Marantz Professionals commitment to users who demand no-compromise components that fit within their budget.
Frequently Asked Questions
Do I need to use phantom power or a power supply?
The MPM-1000 is a standard condenser microphone and will require 48vDC power, either supplied by phantom power through the interface or mixer, or through an external phantom power supply. Check the specifications for your mixer or audio interface to find out if it can provide phantom power on it's own, or if you will need to supply this through an external adapter.
Here is a simple procedure for connecting the microphone:
- Make sure that the gain or volume on your pre-amp, speakers and headphones are all turned down.
- Use an XLR cable and attach the female end securely to the MPM-2000. Connect the male end to your microphone pre-amp or phantom power supply.
- Once the MPM-1000 is fully connected to the pre-amp, turn on the phantom power.
While disconnecting, always be sure to turn down your pre-amp, speakers, and headphones before turning off phantom power. Wait approximately 30 seconds after turning off phantom power to disconnect the MPM-1000. This can help avoid damage to your equipment.
How do I mount the microphone and shock mount?
The MPM-1000 comes with a shock mount for mounting to your microphone stand. It's always recommended to mount the included shock mount first before attaching the microphone to prevent any accidental damage to the mic. Here is a simple procedure to follow:
- Loosen the screw on the shock mount's mounting piece and move the mounting piece up so that it is free to attach to the microphone stand
- Hold the shock mount firmly in one hand and bring the mounting piece up to meet the threaded end of the arm on your microphone stand
- Instead of spinning the shock mount, continue to hold it in one hand whileusing the other hand to spin the arm of the microphone stand, screwing it into the shock mount's mounting piece.
- Once the shock mount is secured firmly to the microphone stand, position the shock mount for recording and tighten the screw on the shock mount so that it stays firmly in place
- Squeeze the wire clasp on the shock mount to pull the ring apart, slide the microphone inside and release the clamp to tighten the grip around the mic.
Important:Always, make sure that the screws on the microphone, shock mount and stand are loosened before making any adjustments to their angle. Forcing any joint without properly loosening it's screw can damage and strip the joint, affecting it's ability to remain secure. The joints should also never be made too tight and should never require more pressure than can be provided by one hand. Again, this can damage the joint and affect it's ability to remain secure in the future.
The included mount won't fit on my microphone stand. Is it compatible?
The MPM-1000 comes with a thread adapter that may come left inside the shock mount and can be easy to overlook. This can be used to adapt the microphone to fit on microphone stands with different threading. Most often this is associated with a difference in microphone stands between the US (5/8" threading, without the adapter) and Europe (3/8" threading, with the adapter).
The piece should be easy to screw in and out using a flat head screwdriver, or even just a guitar pick.
Which side is the front?
The MPM-1000 is a side-address microphone, meaning the capsule is parallel to its body. The microphone will accept sound from sources perpendicular to the microphone body, as opposed to a front-address microphone, like theShure SM58, that accepts sound from its top or end.
When positioning the MPM-1000, the front will be the side marked by the Marantz logo. Point this side towards your source for the best results.
Do I need to use the included cable?
No, you are free to use a different cable as long as it is a microphone cable. This mic requires phantom power which can only be provided by a standard microphone cable, otherwise known as an XLR cable.
Further Technical Support
Whether you are a customer or dealer, if you already own a Marantz Professional product, or if you just have pre-sales questions, the Marantz Professional technical support team is available to help!
Visit the link below to connect with any of the following support options: phone support, email support.
- marantzpro.com/support
Technical Specifications
- Element: Pure-aluminum-plated, 18mm-diameter-diaphragm condenser capsule
- Polar Pattern: Cardioid
- Frequency Response: 20Hz20,000Hz
- Open Circuit Sensitivity: -38 dB 2dB (0 dB = 1 V/Pa @ 1 kHz)
- Impedance
- Output: 200 30% (@ 1 kHz)
- Load: >100
- Self-Noise: 17 dBA
- Maximum SPL: 136dB (THD ~ 1%, 1 kHz)
- Signal-to-Noise Ratio: 77dB
- Phantom Power Requirements: 9-48 VDC, 3 mA typical
- Dimensions(length x diameter): 6.5 x 1.90
- Weight: 10.5 oz
Box Contents
- MPM-1000
- Shock mount
- Windscreen
- Tri-pod stand
- XLR cable
- User Guide
- Safety & Warranty Manual
6. Audio-Technica ATR2100-USB Cardioid Dynamic USB/XLR Microphone
Feature
Handheld dynamic microphone with USB digital output and XLR analog outputUSB output connects to your computer for digital recording, while the XLR output connects with your sound system conventional microphone input for use in live performance
Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording, voiceover, and on-stage use
Built-in headphone jack allows you to directly monitor your microphone output without audible delay
Cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear
Description
The Audio-Technica ATR2100-USB Cardioid Dynamic USB/XLR Microphone is designed to take you from the stage to the studio and beyond. This rugged handheld microphone offers two outputs, USB output for digital recording, and an XLR output that connects with a sound system conventional microphone input for use in live performance. The microphone plugs right into your computer USB port, and functions seamlessly with your favorite recording software. The ATR2100-USB also offers a quality analog-to-digital converter for excellent fidelity, and a headphone output with level control for monitoring with no audible delay. Its cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear. The microphone is ideal for live performance, podcasting, home studio recording, field recording, and voiceover use.7. Audio Technica ATR2100-USB USB/XLR Microphone with Knox Desktop Boom Arm Mic Stand & Pop Filter
Feature
Handheld dynamic microphone with USB digital output and XLR analog outputUSB output connects to your computer for digital recording, while the XLR output connects with your sound system conventional microphone input for use in live performance
Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording, voiceover, and on-stage use
Built-in headphone jack allows you to directly monitor your microphone output without audible delay
Bundle includes ATR2100-USB mic and stand XLR and USB cables with studio arm stand and pop filter
Description
The Audio-Technica Cardioid Dynamic Microphone is designed to take you from the stage to the studio and beyond. This rugged handheld microphone offers two outputs, a USB output for digital recording and an XLR output that connects with a sound system's conventional microphone input for use in live performance. This dynamic handheld microphone also offers a quality analog-to-digital converter for excellent fidelity and a headphone output with level control for monitoring with no audible delay. Its cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear. The cardioid polar pattern microphone is ideal for live performance, podcasting, home studio recording, field recording and voiceover use. Bundle Includes Audio-Technica ATR2100-USB Cardioid Dynamic USB/XLR Microphone Knox Microphone Suspension Boom Scissor Arm with 3/8"-16 Threading (Black) Knox Pop Filter for Broadcasting & Recording Microphones8. Samson Q2U Handheld Dynamic USB Microphone Recording and Podcasting Pack
Feature
High-quality dynamic handheld microphone with XLR and USB I/OXLR output plugs directly into any console
Plugs directly into any computer with a USB input
3.5 mm stereo headphone jack with volume control for no-latency monitoring
Includes: Q2U Dynamic Cardioid Microphone, Desktop Stand, Mic Clip, USB Cable, and XLR Cable
Description
Q2U USB/XLR Microphone The Q2U brings digital and analog together in one convenient microphone. Finally, a high-quality handheld mic to meet both your live sound and digital recording needs. Take the Q2U to your gig for a professional live performance then take it home to record any new ideas right to your computer. Whether your passion is recording or performing, this mic has you covered. The Q2U brings digital and analog together in one convenient microphone.View larger Included accessories make it easy to mix, monitor and listen with comfort and accuracy. View larger Q2U Dynamic Cardioid Microphone The Q2U is a dynamic handheld microphone that features both an XLR output and a USB I/O, so it can plug directly into any live sound console or any computer with a USB input. And the microphone's on/off switch lets you control the audio to the XLR output, allowing you to perform in a live setting and record to a computer simultaneously. This revolutionary mic also features a built-in 3.5mm stereo headphone jack with volume control for no-latency monitoring during recording. Plus, a cardioid pickup pattern and a high-quality A/D converter with a 16-bit, 48kHz sampling rate ensure the sound reproduction in both live and recording applications is clear, detailed and accurate. It's also compatible with most computer based digital audio workstations, so your recordings can be developed with enhanced control and functionality. What's in the Box? Q2U Dynamic Cardioid Microphone, desktop stand, mic clip, USB cable, XLR cable, Cakewalk Music Creator software and user manual. About Samson Samson Technologies began in 1980 as a pioneer in wireless microphone technology. Today, Samson is an industry leader in professional audio solutions whose products are known for their fidelity and reliability. Samson products are preferred by recording artists, performers, educators and audio professionals throughout the world. Key Features Q2U USB/XLR dynamic handheld microphone Compatible with most computer-based digital audio workstation software 1/8-inch stereo headphone output with level controls for no-latency monitoring Cardioid pickup pattern 16-bit, 48kHz resolution Smooth, flat frequency response of 50Hz - 15kHz Solid, die-cast construction with heavy gauge mesh grill Includes desktop tripod stand, mic clip, USB cable and XLR cable Bundled with Cakewalk Music Creator recording software9. EARAMBLE Professional Studio Broadcasting Recording Condenser Microphone Recording Microphone with Shock Mount (Black)
Feature
[BM800 Upgraded Version] Earamble BM-800 Ultra Strong. Compatible with Mobile Phone, Tablet, Computer, Mac and Almost All Devices! -28dB2dB Sensitivity Get Your Voice Farther Away. Also Work with Amplifier if Added 48V Phantom Power Supply.[Cardioid Pickup Pattern for Broadcasting & Recording] Equipped with super-diaphragm capacitance microphone core & cardioid polar pick-up pattern minimizes background noise and isolates the main sound source. Absolutely fulfill the requirement of high quality for broadcasting and recording.
[Compatible with Various Devices] 5V-48V powered compatible with most devices with 3.5mm aux-in plug such as PC, laptop, mobile phone. Be sure that you have set your device correctly before using. Phantom power supply is needed for some devices.
[Nosie Reduction Better Acoustic] Come with durable shock mount to reduces handling noise. The anti-wind foam helps to protect microphone against wind interference and singers' spit. The professional condenser microphone adopts the exacting complete electronic circuit control. Capture rich, full-bodied sound from sources that are directly in front of the mic.
[What's in Box] 1x Professional Microphone, 1x Shock Mount, 1x Power Cable, 1x Anti-wind Foam Cap, 1x User Manual, 18 Months Worry-Free Warranty
Description
Earamble Plug and Play Professional Condenser MicrophoneWhy Earamble BM800 Microphone?
Earamble microphone has -28dB2dB sensitivity which means it can get your voice farther away. Those sold on market has only -45dB1dB sensitivity.
Compatible with Mobile Phone, Tablet, Laptop, Desktop Computer, Mac and almost all devices which is much stronger than other BM800.
We promise 18months warranty and 0% customer complaint. Any problem plz contact us and we will help you all the way.
Get Started Easily and Quickly
Plug & Play design never bothered by software again. 5V-48V supported compatible with almost all kinds of devices you use.
Bring Incredible Sound for Your Using Time
Adopts cardioids polar pick up pattern, exacting complete electronic circuit control and gold-plated diaphragm capsule the microphone provides you with the best sound.
What You Will Get
1x Professional Microphone, 1x Shock Mount, 1x Power Cable, 1x Anti-wind Foam Cap, 1x User Manual
Plz Note:
1. Some devices need extra HEADSET ADAPTER to work properly with the microphone like some of the Apple Devices and devices with Single Audio Port
2. Microphone is for audio port which can supply 5-48V power (most devices can do that) it cannot be used for a port without power. An extra 48 phantom power supply is needed if used for a no power device.
3. If the microphone cannot be used to your device, plz check if your device has set itself correctly with the microphone because some devices need to set up its microphone at the first time
4. If you want better sound quality you can add a USB Soundcard
5. If used for a high power amplifier plz add an extra 48 phantom power supply to drive it
6. Plz contact us if you have any problem with its using. We will help you all the way
10. TONOR Pro Condenser Microphone XLR to 3.5mm Podcasting Studio Recording Condenser Microphone Kit Computer Mics with 48V Phantom Power Supply
Feature
GOOD SOUND EFFECT MICROPHONE: the condenser microphone adopts complete electronic circuit control and gold-plate diaphragm capsule. With a good cardioid polar pickup pattern and enough 48V phantom power supply,the microphone minimizes background noise and accurately records the most subtle sound.DURABLE & STURDY SCISSOR ARM STAND: the suspension scissor arm stand is made of durable steel material. It can be sturdily mounted on the announcers' table with the table mounting clamp.
PROTECTIVE POP FILTER: the double nylon net microphone wind screen pop filter helps you against plosion and popping to get your best vocal recordings. 360 degree flexible gooseneck provides adjustment of any angle or position as you want.
ANTI VIBRATION SHOCK MOUNT: the shock mount is made of solid metal and reduce the trill caused by vibration effectively.
NOTE:(1)48V Phantom Power Supply is INCLUDED! (2)The microphone cannot be used with mobile phone and tablet computer.(3) For optimal sound quality, face the sound source directly onto the screened sides with TONOR logo of the microphone head.
Description
Description:This XRL to 3.5mm condenser microphone adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule. With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. It is suitable especially for studios, recording,broadcasting etc.
Note:
1.When connect the podcasting condenser microphone with laptop, please connect the laptop to electrical outlet(Voltage Required:5V) or use the supplied 48-volt phantom power to get the best sound quality.
The microphone could be used alone when connect with desktop computer.
2.Please decrease the volume and keep a sufficient distance between the microphone and the speaker to avoid howling sound. Please put the microphone away from the amplifier to avoid recording noise due to amplifier.
3.To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures.
Warranty:12-month warranty. 30-day return.
IMPORTANT TIP: For optimal sound quality, face the sound source directly onto the screened sides with "TONOR" logo of the microphone head. Package Included:
1 x Podcasting Condenser Microphone
1 x Microphone Suspension?Scissor Arm Stand
1 x Table Mounting Clamp
1 x Metal Shock Mount
1 x Microphone Pop Filter
1 x Foam Protective Anti-wind Cap Cover
1 x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m)
1 x 48-Volt Phantom Power Supply
1x Power Adapter (American standard)
11. TONOR Professional Studio Condenser Microphone Computer PC Microphone Kit with 3.5mm XLR/Pop Filter/Scissor Arm Stand/Shock Mount for Professional Studio Recording Podcasting Broadcasting, Blue
Feature
SUITSMORE: Pick-up pattern minimizes background noise and isolates the main sound sources. This microphone set suits for recording, broadcasting, studio in PC computers(APPLE Mac needs external sound card).DURABLE & STURDY SCISSOR ARM STAND: the suspensionscissor arm stand is made of durable steel material. It can be sturdily mounted on the announcers' table with the table mounting clamp.
PROTECTIVE POP FILTER: the double nylon net microphone wind screen pop filter helps you against plosion and popping to get your best vocal recordings. 360 degree flexible gooseneck provides adjustment of any angle or position as you want.
ANTI VIBRATION SHOCK MOUNT: the shock mount is made of solid material and reduce the trill caused by vibration effectively.
NOTE:(1)It cannot be used with mobile phone and tablet computer.(2)Voltage Required:5V, to obtain the best sound quality. (3) For optimal sound quality, face the sound source directly onto the screened sides with Tonor logo of the microphone head.(4) 48V Phantom Power Supplyis NOT INCLUDED!
Description
Description:This XRL to 3.5mm condenser vocal microphone adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule. With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. It is suitable especially for studios, recording,broadcasting etc.
Note:
1.When connect the podcasting condenser microphone with laptop, please connect the laptop to electrical outlet(Voltage Required:5V) or use 48-volt phantom power .
The microphone could be used alone when connect with desktop computer.
2.Please decrease the volume and keep a sufficient distance between the microphone and the speaker to avoid howling sound. Please put the microphone away from the amplifier to avoid recording noise due to amplifier.
3.To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures.
4. maximum 5cm thickness for table clamp
Warranty:12-month warranty. 30-day return.
Package Included:
1 x Podcasting Condenser Microphone
1 x Microphone SuspensionScissor Arm Stand
1 x Table Mounting Clamp
1 x Anti Vibration Shock Mount
1 x Microphone Pop Filter
1 x Foam Protective Anti-wind Cap Cover
1x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m)
1x USB External Sound Card (for using with Mac.)
IMPORTANT TIP: For optimal sound quality, face the sound source directly onto the screened sides with "TONOR" logo of the microphone head.
12. TONOR Adjustable Scissor Arm Microphone Stand Made of Steel for Recording Broadcasting Studio with Table Mounting Clamp, Length of 15.7 in
Feature
DURABLE CONSTRUCTION: Constructed out of heavy duty metal that guarantees stability and long lasting durability. The arm stand weighs only 0.45kg and it can support up to 1.5kg.ADJUSTABLE SUSPENSION ARM: The scissor-shaped suspension arm is adjustable and foldable. It allows for angle adjustments and 360 rotation, giving you optimal position. Suspension arm at full extension is 270
PREMIUM MOUNTING CLAMP: The max opening of the clamp is 1.45 inches, which can easily be fixed on tables, desks, and other mounting supports of different sizes. The installing position features a sponge to protect your table from scratching.
COST EFFECTIVE: The Arm Stand Set includes 1 suspension arm, 1 plastic microphone holder and 1 mounting clamp. In addition, it is not suitable for Blue Yeti USB Microphone.
WARRANTY: With great customer service, TONOR offers 12-month repair/replacement warranty and 30-day hassle-free return policy.
Description
Specification
Weight:0.45kg
Color: Black
Description
Ideal for professional use, the heavy duty metal construction of the suspension arm stand allows for great adjustability as well as long lasting use.
The max opening of the clamp is 1.45 inches, which can easily be fixed on tables, desks, and other mounting supports of different sizes.
Please ensure that the clamp fits securely to your table top for maximum stability. When installing, it is normal for the clamp to shake.
Package Content
1x Suspension Arm
1x Plastic Microphone Holder
1x Mounting Clamp
