Finding your suitable arduino pro micro 32u4 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best arduino pro micro 32u4 including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. HiLetgo 3pcs Pro Micro Atmega32U4 5V 16MHz Bootloadered IDE Micro USB Pro Micro Development Board Microcontroller Compatible to Arduino Pro Micro Serial Connection with Pin Header
Feature
ATmega32U4 running at 5V/16MHzSupported by Arduino IDE v1.0.1
On-Board Micro-USB connector for programming
4 x 10-bit ADC pins, 12 x Digital I/Os
Rx and Tx Hardware Serial Connections
Description
Description:1. The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface.
2. This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
Features:
ATmega32U4 running at 5V/16MHz
Supported by Arduino IDE v1.0.1
On-Board Micro-USB connector for programming
4 x 10-bit ADC pins, 12 x Digital I/Os
Rx and Tx Hardware Serial Connections
Note: When you open the Arduino IDE software, pls go to the tool and choose the board "Arduino Leonardo"
Package included:
3* Pro Micro ATmega32U4 5V/16MHz Development Board
2. KOOKYE 3PCS Pro Micro ATmega32U4 5V/16MHz Module Board With 2 Row Pin Header for Arduino Leonardo Replace ATmega328 Arduino Pro Mini
Feature
ATMega 32U4 running at 5V/16MHz, the maximum voltage allowed on the RAW pin is 9V, 6-7V input recommendedSupported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os
Description
Note: When you open the Arduino IDE software, pls go to the Tool and choose the board "Arduino Micro"
1. The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface
2. This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 9V DC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
3. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.
Feature:
ATmega32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest Arduino-Compatible Board Yet
Package includes:
3 x Arduino Pro Micro ATmega32U4 Module
3. SparkFun Pro Micro - 5V/16MHz
Feature
ATMega 32U4 running at 5V/16MHzSupported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins 12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Description
Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.
Sparkfun's smallest Arduino Compatible Board yet!
4. OSOYOO Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header for arduino Leonardo Replace ATmega328 Pro Mini
Feature
ATMega 32U4 running at 5V/16MHzSupported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os
Description
on-line instructions: http://osoyoo.com/2018/06/25/osoyoo-pro-micro-boardNote:When you open the Arduino IDE software, pls go to the Tool and choose the board "Arduino Leonardo"
We have tech support for after-sale. If it can't be recognized by your computer when you use it, please change another USB cable or computers to test, if still no any update, may you need to install a driver , we made a detail tutorial, you can visit: https://youtu.be/9k5mk-FHF24 if still not solved it, please tell us.We can definitely help you to fix the problem .
1. The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface
2. This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
3. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.
Feature:
ATmega32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
Recommand power supply for board: 6-7V, less than 9V
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest Arduino-Compatible Board Yet
Package includes:
1 x OSOYOO Pro Micro ATmega32U4 Module for Arduino
5. KOOKYE 3PCS Black Pro Micro Board ATmega32U4 5V/16MHz Module Board with 2 Row Pin Header for Arduino Leonardo Replace ATmega328 Arduino Pro Mini Black
Feature
The Pro Micro is based on the ATmega32U4 microcontroller featuring a built-in USB which makes the Micro recognisable as a mouse or keyboard,it running at 5V/16MHz and the maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended.There are 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections RX and TX on Pro Micro. This board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
The ATmega32U4 chip on the Pro Micro board comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.
The PRO Micro board can be powered via the micro USB connection or with an external power supply. The power source is selected automatically.The Micro appears as a generic keyboard and mouse, and can be programmed to control these input devices using the Keyboard and Mouse classes.
The Pro Micro has a number of facilities for communicating with a computer and other microcontrollers.such as UART TTL (5V) serial communication via RX and TX pin, serial (CDC) communication over USB.It also supports I2C (TWI) and SPI communication.
Description
More Download information, please visit :www.kookye.com/?p=6338
Note: When you open the Arduino IDE software, pls go to the Tool and choose the board "Arduino Micro"
-- The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface.
-- This tiny little board does all of the Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections RX and TX. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12V DC.
--The Pro Micro is powered with an external power supply(not via the micro USB connection),please be sure to make the power connect to the "raw" pin and the ground to GND.
Feature:
ATmega32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest Arduino-Compatible Board Yet
Package includes:
3 x Arduino Pro Micro ATmega32U4 Module
6. Keywish 3pcs Pro Micro ATmega32U4 5V/16MHz Development Board With 2 Row Pin Header for Arduino Leonardo Replace ATmega328 Arduino Pro Mini
Feature
The Pro Micro is based on the ATmega32U4 microcontroller,it running at 5V/16MHzSupported by Arduino IDE v1.0.1
There are 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections RX and TX on Pro Micro
The ATmega32U4 chip on the Pro Micro board comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer
The PRO Micro board can be powered via the micro USB connection or with an external power supply
Description
Note: When you open the Arduino IDE software, pls go to the tool and choose the board "Arduino Leonardo"Description:1. The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface.2. This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.Features:ATmega32U4 running at 5V/16MHzSupported by Arduino IDE v1.0.1On-Board Micro-USB connector for programming4 x 10-bit ADC pins, 12 x Digital I/OsRx and Tx Hardware Serial ConnectionsPackage included:3* Pro Micro ATmega32U4 5V/16MHz Development Board7. SparkFun Pro Micro - 3.3V/8MHz
Feature
ATMega 32U4 running at 3.3V/8MHzSupported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins 12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Description
Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 8MHz and 3.3V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
This is the 3.3V version so, as always, keep in mind the limits of system voltage and so forth. The lower system voltage also has its advantages, though, like ease of use with many common 3.3V sensors. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
Sparkfun's smallest Arduino Compatible Board yet!
8. Gikfun USB Nano V3.0 ATmega328 CH340G 5V 16M Micro-controller board For Arduino (Pack of 3pcs) EK1620x3
Feature
Operating Voltage(logic level):5V,Support USB download and PowerPlease wear anti-static gloves or bracelet when operate electronic products.Please keep it in anti-static bag when not use it. Please keep it out of reach of children.
Don't use aged usb cable or aged circuit board to connect Nano V3.0 Board.Pull down the usb from computer when no need to upload and download procedures.
Suit for people above 18 year's old with 1 year electronic diy experience.Or use it under the guidance of electronic specializer
The product is used for learning and test Code.It's Prohibited for any other purpose.
Description
Specifications:Product Dimensions:4.2x1.7x0.5cm
CH340G REPLACE FT232RL
Operating Voltage(logic level):5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Simple Operation:
1.Down CH340G Driver
CH340G Driver Download link : http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
The driver which works for MAC User "www.wch.cn/downfile/178"
2.Plug in the Nano development board,the driver will install automatically
Package Included:
3Packs USB Nano V3.0 ATmega328 CH340G 5V 16M Micro-controller board
Warranty:
45 days money-back and 12-month, worry-free Guarantee!
Gikfun USB Nano V3.0 Micro-controller board is totally safe product which has been certified by USA Federal Communications.
Notes:
1.Don't use aged usb cable or aged circuit board to connect Nano V3.0 Board
2.Pull down the usb from computer when no need to upload and download procedures
Warning:
1.The product is used for learning and test Code.
It's Prohibited for any other purpose.
2.Suit for people above 18 year's old with 1 year electronic diy experience.
Or use it correctly under the guidance of electronic specializer.
3.Please wear anti-static gloves or bracelet when operate electronic products.
Please keep it in anti-static bag when not use it.
Please keep it out of reach of children.
9. discoGoods Pro Micro ATmega32U4 5V/16MHz Module Board with 2 row pin header For Leonardo Board DIY Starter Kit
Feature
ATMega 32U4 running at 5V/16MHzSupported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os. Rx and Tx hardware serial connection.
Description
Note: When you open the Arduino IDE software, pls go to the Tool and choose the board "Arduino Leonardo"
1. The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface
2. This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
3. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.
Feature:
ATmega32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest Arduino-Compatible Board Yet
Package includes:
1 x Arduino Pro Micro ATmega32U4 Module
10. Gikfun USB Nano V3.0 ATmega328 CH340G 5V 16M Micro-controller board for Arduino Ek1620x1
Feature
Operating Voltage(logic level):5VSupport USB download and Power
CH340G Driver Download link : http://www.5v.ru/ch340g.htm
The Driver for MAC User "www.wch.cn/downfile/178"
Description
Specifications:Product Dimensions:4.2x1.7x0.5cm
CH340G REPLACE FT232RL
Operating Voltage(logic level):5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10, D11
1 pairs of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Simple Operation:
1.Down CH340G Driver
CH340G Driver Download link : http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software
The driver which works for MAC User "www.wch.cn/downfile/178"
2.Plug in the Nano development board,the driver will install automatically
Package Included:
1PC USB Nano V3.0 ATmega328 CH340G 5V 16M Micro-controller board
Warranty:
45 days money-back and 12-month, worry-free Guarantee!
Gikfun USB Nano V3.0 Micro-controller board is totally safe product which has been certified by USA Federal Communications.
Notes:
1.Don't use aged usb cable or aged circuit board to connect Nano V3.0 Board
2.Pull down the usb from computer when no need to upload and download procedures
Warning:
1.The product is used for learning and test Code.
It's Prohibited for any other purpose.
2.Suit for people above 18 year's old with 1 year electronic diy experience.
Or use it correctly under the guidance of electronic specializer.
3.Please wear anti-static gloves or bracelet when operate electronic products.
Please keep it in anti-static bag when not use it.
Please keep it out of reach of children.