Finding your suitable art masking fluid is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best art masking fluid including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Winsor and Newton 75-Milliliter Watercolor Art Masking Fluid, Colorless
Feature
Use these mask on paper and apply color when dryIncludes 75-milliliter of art masking fluid
Conforms to ASTM d4236
Description
This product masks work on paper when color is applied in broad washes. Apply masking fluid with a brush or pen (not included) and ensure it is completely dry before painting. Remove masking fluid with an eraser. This package contains 75-milliliter of art masking fluid. Conforms to astm d42362. Grafix White Mask Liquid Frisket, 2-Ounce
Feature
A liquid frisket preferred by many watercolor artistsEasily removable and durable
High quality latex
Available in 2-ounce, 4-1/2-ounce and 8-1/2-ounce bottles
Made in the usa
Description
Grafix White Mask Liquid Frisket, 2-Ounce3. Winsor & Newton Art Masking Fluid, 75ml
Feature
Art masking fluid is a pigmented liquid composed of rubber latex and pigmentFor masking areas of work needing protection when color is applied in broad washes
Conforms to astm d4236
Comes in 75-mL bottle
Available in yellow color
Description
Winsor & Newton Art Masking Fluid, 75ml4. Daler-Rowney Art Masking Fluid 75 ml
Feature
DA1140070205011385919288
Brand New Item / Unopened Product
Daler
Description
Used to create striking white highlights or areas for overpainting at a later stage. Forms a fast drying water-resistant film on water color paper and board, easily removed when dry by rubbing with an eraser, soft tissue or cotton ball. An old brush, pen or cotton ball should be used to apply the Art Masking Fluid as it is extremely difficult to remove from brushes when dry.5. Fineline Applicators Fineline Masking Fluid Pen 1.25oz 18ga Std Tip
Feature
Fine line Products Masking Fluid Pen 1.25oz 18ga Standard TipFine line Products Masking Fluid Pen 1.25oz 18ga Standard Tip- Precision applicator works as a drawing tool
Make free-hand designs, precision spots, and continuous lines
Description
Fine line Products Masking Fluid Pen 1.25oz 18ga Standard Tip- Precision applicator works as a drawing tool. Make free-hand designs, precision spots, and continuous lines. Cap with wire system eliminates clogging and provides an air tight closure, to prove6. Molotow GRAFX Masking Fluid Pump Marker, 4mm, Blister Carded, 1 Each (728.002BC)
Feature
Apply to the surface not to be painted, then colorize and let dry briefly before removingReady to use without further application tools
For all surfaces and creative media
Easily removable without residues
Tip is exchangeable and marker is refillable
Description
Use Molotow GRAFX Masking Fluid Pump Marker, 4mm, to apply to the surface not to be painted, then colorize and let dry briefly before removing. Marker is ready to use without further application tools. For all surfaces and creative media, this fluid pump marker is easily removable without residues. Tip is exchangeable and marker is refillable. Made in Germany. Blister carded.7. Daniel Smith Watercolor Masking Fluid System, 1-Fluid Ounce
Feature
Off-white when wet and dries to a transparent caramel colorIncludes five fine-point tips that can be attached to the bottle and used as a drawing tool
Excellent coverage; easy flowing application
Allow the Masking Fluid to dry thoroughly before painting with watercolor
Made in the USA
Description
DANIEL SMITH Watercolor Masking Fluid is easy to use with the bottle applicator, the included 5, fine-point applicator tips or with an inexpensive brush. Masking Fluid makes an impervious barrier to protect your watercolor paper and preserve the white areas by blocking watercolor washes from flowing into areas you dont want leaving crisp, clean edges. DANIEL SMITH Masking Fluid applies as an off-white color and dries to a transparent caramel color so that you can see it while working, and still be unobtrusive while working on your painting. After Masking Fluid has dried, easy to remove with a rubber cement pick-up or even with your clean fingers. Be careful though, about leaving oils from your fingers when rubbing off the dried Masking Fluid, as oils from your fingers can interfere with new applications of watercolor. Once the Masking Fluid had been removed, either keep the white areas white or add fresh watercolor onto the preserved white area to retain maximum watercolor luminosity. Tip: Dont shake the Masking Fluid, as this may cause air bubbles that will get into the applicator tip and transfer into your Masking Fluid line. Our Masking Fluid does not need shaking because our latex mixture does not easily separate. If you feel you need to mix, then gently roll your bottle once or twice across your table. When applying, gently squeeze the bottle to start the flow of Masking Fluid out the applicator tip. Also, keep the bottle inverted so that the capillary action once started continues to flow and rinse out the applicator tip immediately after using to prevent clogging when it dries. To remove Masking Fluid, use a Rubber Cement Pick-up rather than your fingers to avoid getting oil from your fingers onto your watercolor paper.8. Molotow GRAFX Masking Fluid Pump Marker, 2mm, 1 Each (728.001)
Feature
Apply to the surface not to be painted, then colorize and let dry briefly before removingReady to use without further application tools
For all surfaces and creative media
Easily removable without residues
Tip is exchangeable and marker is refillable
Description
Use Molotow GRAFX Masking Fluid Pump Marker, 2mm, to apply to the surface not to be painted, then colorize and let dry briefly before removing. Marker is ready to use without further application tools. For all surfaces and creative media, this fluid pump marker is easily removable without residues. Tip is exchangeable and marker is refillable. Made in Germany.9. U.S. Art Supply Art Masking Fluid, 125 ml (4.2 oz) Bottle - Artist Drawing Gum Liquid Frisket Mask - Watercolor Medium
Feature
A 125 ml (4.2 oz.) bottle of U.S. Art Supply Art Masking Fluid. A high quality watercolor medium that conforms to ASTM-D4236.A premium art masking fluid that's made with liquid rubber latex that's lightly pigmented. It's ideal for masking areas of artwork that need protection when color is applied.
The fluid dries to a light cream color, so it can be differentiated from white backgrounds, as it allows you to see exactly where you've masked.
Quick drying, non-staining liquid frisket mask is easy to apply using a brush, pen or nib. Brushes, pens and nibs can be washed off with soap and water.
The masking fluid works best on sized paper and is ideal for use by watercolor artists, as it's great for overlying applications of watercolors, gouache and inks.
Description
U.S. Art Supply Art Masking Fluid, 125 ml (4.2 oz) Bottle - Artist Drawing Gum Liquid Frisket Mask - Watercolor Medium
Mask areas of artwork that need protection when color is applied
A premium art masking fluid that's made with liquid rubber latex that's lightly pigmented. The fluid dries to a light cream color, so it can be differentiated from white backgrounds, as it allows you to see exactly where you've masked. A high quality watercolor medium that conforms to ASTM-D4236.
It's ideal for use by watercolor artists
Quick drying, non-staining liquid frisket mask is easy to apply using a brush, pen or nib. Brushes, pens and nibs can be washed off with soap and water. The dried masking fluid should be removed as soon as possible after use, and it is easily removed by rubbing it off by hand or with a soft eraser. The masking fluid works best on sized paper and is ideal for use by watercolor artists, as it's great for overlying applications of watercolors, gouache and inks. Do not apply masking fluid on damp or soft paper.
