Finding the best battery indicator 36v suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. SEARON 36v Volt LED Battery Status Charge Indicator Meter Gauge for EZGO ClubCar Yamaha Golf Cart
Feature
LED battery indicator works on 36 volt Lead-Acid Batteries for EZGO ClubCar Yamaha Golf Cart.Displayed using a 10 segment LED bar graph display from full to empty and Specifically designed to monitor the power level of battery while charging or discharging.
Make sure your "C" terminal is either connected to the Battery "+" or a Key switch,otherwise meter scans from full to empty then shuts off.
At a 90% battery discharge, the red and yellow LEDs will alternately flash to indicate a very low voltage capacity is remining.
Once battery was fully charged, Meter will cycle through for continuous 6 minutes then stay "full" position.
Description
Notice:-Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Othersise, Meter will scan from full to empty then shuts off .
-Meter will stay full position while first is connected with batteries and indicate the actual battery level after 155 seconds.
-Please connect the correct voltage to your battery indicator as noted on your model . Failure to connect to the correct voltage will damage the batery indicator causing it to function abnormally.
-Once battery was fully charged, Meter will cycle through for continuous 6 minutes then stay "full" position.
-The Battery Meter works on Lead-acid Batteries only.
Specifications:
-The batteries voltage is displayed using a 10 segment LED bar graph(1 Red, 2 Yellow and 7 Green LEDs) display from full (far right green LED) to empty (far left red LED).
-The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.
-At a 90% battery discharge, the red and yellow LEDs will alternately flash to indicate a very low voltage capacity is remining.
-It is strongly recommended to recharge the batteries when you get to the 3rd Yellow LED, this is a safety precaution to avoid dead batteries.
-Operating and Storage Temperature: -20 to 85.
-Accuracy: +/- 0.5 percent.
-Net Weight: 21g / 0.8oz.
Troubleshooting Tips
1, Meter cannot move to full charge.
This happens when battery was fully charged but the battery voltage cannot reach to preset fully charged voltage of meter, just disconnect the meter from power and reconnect, meter will reset to full.
2, Meter scans from full to empty then shuts off:
This occurs if your "C" terminal is not connected, make sure your "C" terminal is either connected to the battery + or a key switch.
2. 36 Volt Golf Cart Battery Meter-State Of Charge Meter
Feature
52mm (2 1/16") Round State of Charge meterMade in the USA
Comes with mounting hardware(U-bracket, nuts and washers) to mount into any 52mm hole
Fits all 36 volt carts
Description
52 mm ROUND STATE OF CHARGE METER. New!! All of our meters are made in the U.S.A. THIS METER COMES WITH MOUNTING HARDWARE TO MOUNT IN 2 1/16" HOLE. THIS BATTERY METER ALLOWS YOU TO SEE HOW MUCH CHARGE IS IN YOUR BATTERIES AND WHEN THEY NEED CHARGING. DON'T GET STUCK RUNNING OUT OF POWER, INSTALL A BATTERY GAUGE TODAY. INSTALLATION IS VERY EASY, ONE POWER AND ONE GROUND WIRE TO HOOK UP TO THE STANDARD 1/4" SLIP-ON ON TERMINALS. METER MOUNTS ANYWHERE, MEASURES 2-3/16''O.D. X1-3/4 DEEP. FITS ALL CARTS WITH 36 VOLT SYSTEMS Give us a call M-F 9-5 est 727-572-90113. AIMILAR Golf Cart Battery Meter Battery Charge Discharge Status Indicator Gauge for Lead-Acid Battery Club Car 36V (36V)
Feature
NEW UPDATE LED Battery Indicator Tester:No Resetting Required.IMPORTANT: Please connect + to +, - to -, and meter C to battery +.
Once battery was fully charged, meter will cycle through for continuous 6 minutes then stay "full" position.
Suitable for lead-acid batteries. Application: motorcycle, golf carts, car, jet ski, and so on. NOTE:Will not work with Trojan brand batteries.
SATISFACTION GUARANTEED: 30-Day money back and 2-Year warranty.
Description
Product Features:1.The Positive and the C lead need to be connected together, with one lead going to the positive side of the battery and the one marked negative to the negative side.
2.Once battery was fully charged, meter will cycle through for continuous 6 minutes then stay "full" position.
3.Meter will stay full position while it is connected with batteries first time,will indicate the actual battery level after 155 seconds.
4.Suitable for lead-Acid batteries. NOTE:Will not work with Trojan Brand Batteries.
5.Display: 1 red + 2 yellow + 7 green color LEDs for indicator, 10% per LED segment
6.Application: motorcycle, golf carts, car, jet ski, and so on.
Troubleshooting Tips:
1.Q: Meter scans from full to empty then shuts off:
A: This occurs if your "C" terminal is not connected to the battery "+" or a key switch.
Please connect + to +, - to -, and meter C to battery +.
2.Q: Meter cannot move to full charge:
A: This happens when the battery was fully charged but the battery voltage cannot reach to preset fully charged voltage of meter,
just disconnect the meter from power and reconnect, meter will reset to full.
3.Q: My current meter uses only +/- connect. will meter work without "C" connect? Can I just jumper the + terminal the "C" (meter would always be on) ?
A: The meter will not function properly without the "C" terminal connected. The "C" terminal controls the display on the meter.
You can certainly jump the "C" terminal to the Meter "+" terminal for an always on state.
Or just run a wire from "C" to the key switch so the meter will only be on when the cart is switch on.
4. EZGO 610583 State of Charge and Fuel Meter Kit
Feature
Used on 2008-current E-Z-GO Gas & ElectricRXV VehiclesDetermines the fuel level in RXV gas vehicles and the batteries' charge level for RXV electric vehicles
Measures: 31" x 5" x 8", Weight: .25 lb.
Description
The State of Charge Fuel Meter Kit includes the state-of-charge and fuel meters for RXV Gas orElectricVehicles. The fuel meterdetermines how much fuel is left in the tankof RXV gas vehicles, while the state-of-charge meter can be installed on RXV electric vehicles to determine the charge levelof thebatteries.5. Automotive Authority LLC 36V Golf Cart Digital Volt Meter Battery Gauge Club Car EZGO Yamaha 36 Volts - BLUE
Feature
36V blue digital volt meter. This voltage meter will give you a real time voltage reading from your batteries. You will never have to risk being stranded from your batteries going dead.Display Color: Blue
Dimensions: 1.6" x 1" x 0.79"
Refresh Rate: 0.5 Second
Design: Waterproof, Dust-Proof, Shock-Proof
Description
The meter is extremely easy to wire. Just connect + to + and - to -. If you want to connect it through a key switch then connect + to switch, switch to battery +, and - to -. Please let me know if you have any other questions I can assist you with. Thanks again.6. Automotive Authority LLC 36 Volt EZGO Club Car Yamaha Golf Cart Battery Indicator Meter Gauge Rectangle
Feature
NEW UPDATE - No Resetting Required (We have listen to your feedback)Operating Voltage: 36 Volt - Range: 36.98V Full - 31.14V Empty
Never let your electric equipment run out of power again. This battery indicator is specifically designed for battery powered equipment to monitor the charge status of the batteries charge.
Installation Instructions Provided in the Product Description
Will not work with Trojan Brand Batteries
Description
Only 1 LED will be illuminated at a time. Connections: The "+" terminal is for a positive volt connection. The "-" terminal is for the negative or ground connection. The "C" terminal is for when being installed through a key switch or direct connection. Please review the installation instructions for the correct wiring diagrams. Dimensions: Overall: Width 2 1/16" ; Height 1 1/4" Hole cutout - 1 3/8" wide by 7/8" high Depth Behind front meter flange to end of mounting screws - 1 1/8 inches7. SEARON 36v Volt LED Battery Level Status Indicator Gauge Testers for EZGO Golf Carts Yamaha Club Car Motorcycle Marine Van Vehicle (36 Volt)
Feature
36 Volt LED Battery Indicator for EZGO Golf Carts Yamaha Club Car Motorcycle Marine Van VehicleThe batteries voltage is displayed using a 10 segment LED bar graph (1 Red, 2 Yellow and 7 Green LEDs) display from full to empty
1 Extra LED Bar to Indicate the Current Battery Capacity Statue(Display Green/Yellow/Red Light)
6 adjustable batteries types settings.
2 Years Warranty
Description
LED Battery Indicator for EZGO Golf Carts Yamaha Club Car Motorcycle Marine Van Vehicle...Product Features
Instate Battery Reading.
LED flashes for low charge warning.
6 adjustable batteries types settings.
The meter will scan from "Empty" to "Full" when connected to power.
The meter will display "Full" green light when fully charged.
The batteries voltage is displayed using a 10 segment LED bar graph display from full (far right green LED) to empty (far left red LED).
1 extra LED bar used to indicate the current battery capacity statue.
The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.
At a 90% battery discharge, the red and yellow LEDs will alternately flash to indicate a very low voltage capacity is remaining.
1 Optional "R" terminal to control external device.
Delay of 155 seconds to indicate the current battery level during the discharging cycle.
Delay of 200 seconds to indicate the current battery level during the charging cycle
Product Specification:
Operating voltage: Operating Voltage: 12/24V, 36V and 48V depending on model.
Dimension: 47mm x 31.2mm x 45.2mm/ 1.85 x 1.23 x 1.78 inch.
Operating Temperature: -20 to 85.
Net weight: 46.5 g.
IP rating: IP65.
8. Searon 36V Volt LED Battery Indicator Meter Guage for EZGO Club Car Yamaha Golf Cart Solar Panel Marine Trolling Motor
Feature
2016 Brand New LED battery Indicator works on 36 Volt Lead-acid batteries to monitor the charge/discharge status of your batteries.The batteries voltage is displayed using a 10 segment LED bar graph(1 Red, 2 Yellow and 7 Green LEDs) display from full to empty
At a 90% battery discharge, the red and yellow LEDs will alternately flash to indicate a very low voltage capacity is remining.
Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Othersise, Meter will scan from full to empty then shuts off
Once battery was fully charged, Meter will cycle through for continuous 6 minutes then stay "full" position.
Description
Notice:-Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Othersise, Meter will scan from full to empty then shuts off .
-Meter will stay full position while first is connected with batteries and indicate the actual battery level after 155 seconds.
-Please connect the correct voltage to your battery indicator as noted on your model . Failure to connect to the correct voltage will damage the batery indicator causing it to function abnormally.
-Once battery was fully charged, Meter will cycle through for continuous 6 minutes then stay "full" position.
-The Battery Meter works on Lead-acid Batteries only.
Specifications:
-The batteries voltage is displayed using a 10 segment LED bar graph(1 Red, 2 Yellow and 7 Green LEDs) display from full (far right green LED) to empty (far left red LED).
-The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.
-At a 90% battery discharge, the red and yellow LEDs will alternately flash to indicate a very low voltage capacity is remining.
-It is strongly recommended to recharge the batteries when you get to the 3rd Yellow LED, this is a safety precaution to avoid dead batteries.
-Operating and Storage Temperature: -20 to 85.
-Accuracy: +/- 0.5 percent.
-Net Weight: 21g / 0.8oz.
Troubleshooting Tips
1, Meter cannot move to full charge.
This happens when battery was fully charged but the battery voltage cannot reach to preset fully charged voltage of meter, just disconnect the meter from power and reconnect, meter will reset to full.
2, Meter scans from full to empty then shuts off:
This occurs if your "C" terminal is not connected, make sure your "C" terminal is either connected to the battery + or a key switch.
9. AIMILAR LED Battery Indicator Meter Gauge Round 12V 24V 36V 48V 72V Battery Gauge Charge Status Monitor Tester for Golf Carts Forklift Car Scooter Motorcycle
Feature
This battery indicator gauge works for both 12V / 24V, 36V, 48V, 72V battery, used for truck, RV'S, Golf cart or any battery operated unit.High reliability, low cost and compact size.
LED Flash for low charge and high charge warning
Specifically designed to monitor the power level of battery while charging or discharging.
Wide operating voltage and temperature range.
Description
Product Features:-Works for both 12V / 24V, 36V, 48V / 72V battery, used for truck, RV'S, Golf cart or any battery operated unit.
-High reliability, low cost and compact size.
-LED Flash for low charge & high charge warning.
-Specifically designed to monitor the power level of battery while charging or discharging.
-Memory option to recall last charge level.
-Display of 10 segment LED bar graph.
-Wide operating voltage and temperature range.
-Hour Meter features a 6-digit, 7 segment LCD display.
-Easy to read hour meter.
Specifications:
-Operating voltage: 12V / 24V, 36V, 48V / 72V
-Operating and Storage Temperature: -40~85
-Operating current: 20 mA nominal
-Memory capacity: CMOS EEPROM
-Compatible Models: Golf Cart or other equipment powered 12V/24V/36V/48V/72V volt DC battery
-Product size: 5.8 * 5.1cm / 2.3 * 2.0in ( D * H )
-Product weight: 43g / 1.5oz
-Package size: 6.2 * 6.2 * 5.6cm / 2.4 * 2.4 * 2.2in
-Package weight: 61g / 2.2oz
Note:
Before you connect the indicator to battery, please confirm the voltage of your battery first, and connect the positive electrode to the correct pin of the indicator on the back, wrong voltage connection maybe cause the battery indicator damage.
Package List:
1 * Battery Indicator with Hour Meter
1 * Pack of accessories
1 * User manual ( English )
10. Searon LED 12V 24V 36V 48V 72V Digital Battery Indicator Status Charge Indicator with Hour Meter Gauge
Feature
Led Battery indicator meter with LCD hour meter GuageWorks on 12V 24V 36V 48V and 72V Lead-acid Batteries and 4.5-90 volt DC power
Hours reads up to 99999.9 hours with 0.1 hours resolution and are resettable.
Batter indicator Displays using a 10 segment LED bar graph display from full to empty
2 Years Warranty
Description
Notice-This Battery Indicator fits 12V 24V 36V 48V and 72V Lead-acid Batteries and 4.5-90 Volt DC power.
-Please connect the correct voltage to your battery indicator as noted on the meter. Failure to connect to the -correct voltage will damage the batery indicator causing it to function abnormally.
-Make sure your "C" terminal is either connected to the Battery "+" or a Key switch,otherwise meter scans from full to empty then shuts off.
-The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.
-At a 90% battery discharge, the red and yellow LEDs will alternately flash to indicate a very low voltage capacity is remining.
-During charging, once the the battery voltage reach to the preset fully charged voltage of meter, Meter will cycle through for continuous minutes and stay "full" position.
Battery Indicator Features
-Displayed using a 10 segment LED bar graph display from full to empty.
-The meter will scan from "Full" to "Empty" when connected to power and then indicate the real battery level.
-High reliability, low cost and compact size.
-LED flashes for low charge warning.
-Specifically designed to monitor the power level of battery while charging or discharging.
-Operating and Storage Temperature: -40 ~ 85.
-Operating current: 20 mA nominal.
-Product size: 5.8 * 5.1cm / 2.3 * 2.0in ( D * H )
-Product weight: 43g / 1.5oz.
Hour Meter Feature
Works on 4.5-90 volt DC power.
Dispaly: 99,999.9 hours with 0.1 hours accuracy.
Automatically recycle to zero.
CMOS EEPROM Memory.
Hole Size: 2 Inch
Package Listing
1 * Battery Indicator
1 * Pack of accessories
1 * English User manual
