Finding the best pci express sata iii suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. I/O CREST 4 Port SATA III PCI-e 2.0 x2 Non RAID Hard Drive Controller Card Marvell 9235 Chipset
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9235
Installed with a full profile bracket, Low profile included with the package
Port Multiplier FIS-based and Command-based switching supported
Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Supports Native Command Queue (NCQ)
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x2 Interface is Compatible with PCI-Express x4, x8, and x16 slots
Description
The SI-PEX40062 4 port SATA III PCI-E 2.0 X2 controller card marvel 88SE9235 chipset adds four SATA III ports to a computer through a PCI-E 2.0 X2 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gaps, the controller card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for SATA 600 MB/s storage needs.2. IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid with Low Profile Bracket SI-PEX40064
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9215
Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIex1
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots
Description
PCIe x1 Interface Version 1.0, 4-Port Internal SATA 6Gbps Controller Card, Non-Raid, Marvell 88SE9215 Chipset, with Low Profile Bracket. IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.3. Sedna PCI Express (PCIe) SATA III (6G) SSD Adapter with 1 SATA III Port (with Built in Power Circuit, no Need SATA Power Connector, Best for Mac), SSD not Included
Feature
Direct mounting of 2.5" SATA III SSd / Hdd on boardOne extra SATA III port for other devices
Built in Power circuit, best for MAC where no power connector available
Operating System Software can be installed on mounted SSD and booting of the OS from the installed PCIE disk is supported ( Your mother board BIOS need to support this feature )
Maximum capacity supported : 2T
Description
Features :Direct mounting of 2.5" SATA III SSd / Hdd on board (SSD not included)
One extra SATA III port for other devices
Operating System Software can be installed on mounted SSD and booting of the OS from the installed PCIE disk is supported (Your mother board BIOS need to support this feature)
Using standard low cost high perfermance 2.5" SSD instead of the much more expansive mSATA SSD
Built in Power circuit, no power connection required. Best for MAC where no extra power connection available
Can be used for installion of VMWare ESXI 5.5 as boot disk (need to inject sata-xahci-1.10-1.x86_64.vib to ESXI installation ISO file)
Specifications :
PCIE 2 Port SATA III (6G) Port
1 Port support direct installation of standard 2.5" SATA III SSD
1 extra internal SATA III port for intallation of extra Hdd / SSD
PCI Express Specification Rev. 2.0
1-Lane (x1) PCI-Express with transfer rate 5Gb/s Full Duplex channel
Compliant with Serial ATA 3.0 Specification,Data transfer rate up to 6.0Gb/s
Backward compatible with SATA1.0/SATA2.0 specification
Maximum capacity supported : 2T
Support NCQ
Driver supported Windows98SE /ME/ 2000/XP/Server 2003/Vista/WIN7/Win8/Win 8.1/ Win 10, Mac OS
System Requirement :
Available PCIE 2.0 1X,2X,4X,8X or 16X slot on PC
Supported OS
Package Content :
PCIE SATA III SSD adapter
Driver CD
4 x Hdd mounting screw
(SSD in photo is not included)
4. IO Crest 8-port SATA III PCIe 2.0 x2 Controller Card Green, SI-PEX40071
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Marvell 88SE9705 chipset
Ports: 8 SATA 6GB/s Ports
Compliant with PCI-E Specification V2.0 and backward compatible with PCI-E 1.X
Supports Native Command Queuing (NCQ)
Compatible with SATA 6G, 3G and 1.5G Hard drives
Compliant with PCI-E Specification v2.0 and backward compatible with PCI-E v1.x
PCI Express x2 Interface, and Compatible with PCI Express x4, x8 and x16 Slots
Marvell 88SE9705 chipset
Supports 3TB/4TB GPT drives
Non-RAID standard SATA controller.
Description
Designed for businesses which require large data storage. It provides reliable access to important data. Dual-chip 8 ports SATA III controller card. Supports Windows 8 and server 2012.5. Syba 4 Port USB 3.0 and 2 Port SATA III PCIe 2.0 X 1 Card VLI/ASMedia Chipset Components Other SD-PEX50064
Feature
Chipsets: VLI VL805 & as media 1061Internal HDD power connector for Supplying +5V power to USB Ports
Supports bulk only transfer (BOT) mode, and USB attached SCSI Protocol (UASP) mode
The optional cables are not included
Description
This PCI Express 2.0 to USB 3.0 and SATA III Combo card is convenient for you to have USB 3.0 function and SATA III function with one PCIe card.6. StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter - PEXSAT34RH
Feature
Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slotPCI Express 2.0 SATA Controller with HyperDuo SSD Tiering
4 Port PCI Express SATA III 6Gb
Maximize system capability with SATA III connection speeds
4 AHCI SATA III (6Gbps) ports through PCI Express x2
Description
Add Four Internal SATA III (6Gbps) Ports To A Computer Through A PCI Express x2 Slot
The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo adds four AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo discreetly works in the background to identify and move frequently accessed files to the faster SSD drive(s) for improved data throughput up to 80% of SSD performance! Note: The HyperDuo automatic storage tiering feature is compatible with Windows XP, Vista, 7, and 8 only.
View larger
View larger
View larger
View larger
The PCIe SATA controller card supports Port Multiplier (PM), enabling multiple SATA drives to be connected to one port over a single cable, for a total of seven drives (up to four drives through PM on one port, and a single drive to the remaining three ports). Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, 1+0) support.
Product Features & Applications
- Use SSD tiering to optimize your system for I/O intensive applications such as Office Suites, photo/video editing and media players
- Upgrade an older PCIe-based system to SATA 6Gbps capability, to better utilize faster SATA drives
- Add more internal SATA ports to a computer system, to connect additional storage drives and/or optical drives
- Provide optimized off-site back-ups/vaulting, through built-in RAID 1 capability
- Perfect for multi-drive internal RAID storage solutions
- Supports HyperDuo SSD auto-tiering
- Four AHCI SATA III (6Gbps) ports through PCI Express x2
- Fully compliant with SATA 3.0 specifications and backward compatible with SATA I/II (1.5/3.0Gbps) drives
- Supports hardware RAID 0, 1, and 1+0 modes configured through BIOS
- Compliant with PCI Express 2.0 standards
- Port Multiplier FIS-based and Command-based switching supported
- Natively supported single chipset design
- Simple HyperDuo configuration via card-BIOS level or intuitive GUI console (Windows only)
- Supports Native Command Queuing (NCQ) and ATA/ATAPI commands
- Includes Low Profile/Half-Height installation bracket
- Supports HDDs/SSDs/Optical/Blu-Ray drives
- LED headers for HDD activity LED indicators
7. IO Crest SI-PEX40108 PCI-Express 2.0 x1 Low Profile SATA 4 Port SATA III PCI-e 2.0 x1 Card
Feature
4 x SATA 6.0 Gb/s Internal ConnectorsUp to 6 Gb/s
PCI-Express 2.0
Low Profile
Description
The PCI-e Controller Card gives you an easy way to add additional 4 internal SATA III ports to your computer by a single PCI Express slot. The SATA III ports offer a blazing-fast speed of 6Gbps, while remaining backwards compatible with the SATA I and SATA II specifications. Also, it supports Port Multiplier FIS Based or Command Based switching, ensuring maximum performance. Chipset: Marvell 88SE9215 Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIe 1.x Compliant with Serial ATA Specification 3.0 Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Hot Plug and Hot Swap Supports Native Command Queue (NCQ) Supports Port Multiplier FIS Based Switching or Command Based Switching Compatible with SATA 6G, 3G and 1.5G Hard Drives SATA ports are bootable For port multiplier function, please follow Windows 8 instructions in Download's tab. Not a Hardware RAID controller. Supports 3TB and 4TB hard drives.8. Ableconn PEX-SA115 2-Port SATA 6G PCI Express Host Adapter Card - AHCI 6Gbps SATA III PCIe 2.0 Controller Card (Marvell 88SE9128 Chipset) - Support Hardware RAID 0, 1
Feature
Supports SATA III transfer speeds up to 6.0Gbps; backward compatible with SATA I/II at 1.5/3.0GbpsBuilt with Marvell 88SE9128. Supports Hardware RAID 0 and 1 modes
Support Port Multiplier FIS-based and Command-based switching
No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later.
High quality. Fully RoHS compliant. Made in Taiwan.
Description
Add two SATA 6G ports with up to 6 Gbps data rate to your computer.
Specification
* Connector:
- 2 x SATA (7 pin; DATA) Plug
- PCI Express x1 Male
* Chipset: MARVELL 88SE9128
* Software:
- No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later. The AHCI drivers are natively built-in on most Operating Systems
- Drivers are available for Windows XP
* Data transfer rate:
- Up to 6 Gbps
* Number of Ports That Support Port Multiplier: 2 (can only use 1 PM at a time)
* Number of Drives Supported Through Port Multiplier: 1 to 5
* 6Gbps SATA III Internal 2 Ports PCIe Gen2 x1 lane host adapter
* Hardware RAID controller to offload host CPU for max performance
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 5Gbps PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0 transfer rate of 6Gbps
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Supports Non-Raid, Hardware RAID 0, 1 for HDD & SSD
* Supports Non-Raid mode for Optical Drive and Blu-Ray Drive
* Supports ATA and ATAPI commands
* Supports SATA Hot-plug, and Native Command Queuing (NCQ)
* Supports one (1) Port Multiplier with FIS-based or Command-based switching
* LED Pin headers for LED activity indicators for each port
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
* BIOS on board supports Windows booting
* Fully RoHS compliant.
* Made in Taiwan
Package Contents
* Ableconn 2-Port SATA 6G AHCI PCI Express Host Adapter Card
* One (1) low profile PCIe bracket
* Quick Installation Guide
Warranty
* Limited One-Year Warranty and Lifetime Product Support
9. Ableconn PEX10-SAT 10 Port SATA 6G PCI Express Host Adapter Card - AHCI 6 Gbps SATA III Low Profile PCIe 2.0 Expansion Card
Feature
Adds 10 SATA 6G ports through a Low Profile PCIe 2.0 x2 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required. It is not positioned for performance storage such as multiple SSD drives.PCIe 2.0 x2 Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included. Compliant with PCI Express v2.0 and backward compatible with PCI Express 1.x
Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive. Support Native Command Queuing (NCQ), Hot plug and Hot swap SATA ports
No driver installation is required. The AHCI drivers are natively built-in on Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
Fully RoHS compliant. High quality product. Made in Taiwan.
Description
The Ableconn PEX10-SAT adds 10 SATA 6G ports through a Low Profile PCIe 2.0 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.
Specification
* Connector:
- 10 x SATA (7-pin, DATA) Female
* Chipset: ASMedia ASM1062 + 2x JMicron JMB575
* Data transfer rate:
- Up to 6 GBps
* Software:
- No driver installation required. The AHCI drivers are natively built-in on most Operating Systems
- Support Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
* 6Gbps SATA III Internal 10 Ports PCIe Gen2 2-lane Host Adapter
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 10Gbps x2 PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0
* Pin headers on board for activity indication on each channel
* Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
* Supports ATA and ATAPI commands
* Supports SATA Hotplug, and Native Command Queuing (NCQ)
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
*Note: does NOT support SATA Port Multiplier
* BIOS on board supports Windows and Linux OS booting
* Fully RoHS compliant
* Made in Taiwan
Note: the product is not positioned for performance storage such as solid state drives. It's ideal for applications that need a lot of drives, or a huge capacity such as surveillance system, etc.
Package Contents
* Ableconn PEX10-SAT 10-Port SATA 6G PCIe Card
* 1x low profile PCIe bracket
10. QNINE PCI Express SATA 3 Controller Card, 2 Port PCIe SATA III 6GB/s Internal Adapter Converter for Desktop PC Support SSD and HDD with Low Profile Bracket
Feature
Attention: Don't Support as System Disk Boot, only used as extension.Support IDE/AHCI mode.
Built in 2 SATA3.0 interfaces,Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Supports Hot Plug and Hot Swap .
Support Windows XP/Server 2003/Vista/7/8(32/64 bit)/MAC/Linux.
Description
PCIe to 2 Port SATA3.0 Expansion CardThis PCI-e to 2 SATA3.0 controller card offers simple connectivity between a host computer and SATA 3.0 devices.