Finding your suitable semi-tubular rivet tool is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best semi-tubular rivet tool including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Louisville Ladder L-3016-06 300-Pound Duty Rating Fiberglass Stepladder, 6-Feet
Feature
Full channel fiberglass, non-conductive full channel red fiberglass for years of durable serviceWide back braces, vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness
Inside spreader braces, each step secured with semi-tubular steel rivets for maximum strength
Slip resistant rubber feet, aluminum angle feet with thick rubber tread on all four legs to provide sure footingfour legs to provide sure footing.
Molded top with handyman's tool slots, rugged, non conductive structural molded top is extremely durable, molded-in slots help keep tools at hand
Description
Includes 6 foot type IA Duty Rating 300 pounds load capacity fiberglass step ladder - L-3016-06.2. Louisville Ladder FS2005 250-Pound Duty Rating Fiberglass Step Ladder, 5-Feet
Feature
Fiberglass is non-conductive when clean and dry250 Lbs, load capacity, includes weight of user and tools
Slip resistant rubber feet, aluminum angle feet with thick rubber tread on all four legs to provide sure footing
Molded top with handyman's tool slots, rugged, nonconductive structural molded top is extremely durable
The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration
Description
Economically priced LOUISVILLE Type 1 Ladders are good for general use applications such as electrical jobs, maintenance work and painting. Non-conductive ladders include plastic tool-tray top with molded-in pail holder and pinchless spreaders. 3" traction-tred aluminum steps. Meets ANSI A14.5 and CSA requirements.3. Proxxon 28608 Precision Vise FMZ with Clamp
Feature
Swivel head rotates in all directions (even down, in front of the workbench)Precision steel jaws are supplied with vertical and horizontal V-slots for securing round work pieces, too
3-Inch wide jaws open to a clamping width of 2-3/4-Inch (70 millimeters) and are equipped with removable rubber covers to protect delicate work pieces from damage
Description
The ball and socket design of this German engineered bench vise, shown here in a horizontal position, allows the ability to position this vise in virtually any orientation. This vise also has flexible mounting options built right in to its design. It can be securely clamped to a table or bench, or screwed directly to a work bench. This vise also makes using our riveting system even easier to use. Positioning the riveting system horizontally makes aligning the rivets simple with less fuss. With the rivets positioned horizontally, the rivets stay in place with less chance of moving or falling out during the rivet setting operation.4. Louisville Ladder FS1505 300-Pound Duty Rating Fiberglass Step Ladder, 5-Feet
Feature
Fiberglass is non-conductive when clean and dry300 Lbs, load capacity, includes weight of user and tools
Double rivet step construction, each step secured with six, large headed, semi-tubular steel rivets for maximum strength, 30 percent greater shear strength than solid aluminum rivets
Inside spreader braces, spreader braces inside fiberglass rails help keep braces from getting hooked or abused during transit
The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration
Description
Extra heavy duty, industrial stepladder. Nonconductive ladder designed for everyday use by contractors and industry. Molded top with handymans tool slots. Wide back braces. Full channel fiberglass rail. Double-rivet step construction. Inside spreader braces. Reinforced bottom back brace5. Louisville Ladder FM1404HD Fiberglass Twin Front Ladder, 4-Feet, 375-Pound Duty Rating
Feature
Heavy duty steel gussets secured with large-headed, semi-tubular steel rivets for maximum strength375 Lbs, load capacity, includes weight of user and tools
Four key stress areas are reinforced with aluminum plates to prolong ladder life
Nonconductive full channel rails are covered with a polyester veil for years of service
The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration
Description
LOUISVILLE Specialty Double-Step Ladders are ideal for two-person applications or two-way access. 3" serrated aluminum steps. Heavy double-gusset bracing. Non-pinch spreader bars and slip-resistant rubber feet. Non-conductive. Fiberglass. Meets ANSI A14.5 and CSA requirements.6. Prime-Line Products H 3740 Sash Balance Rivet Setting Tool
Feature
Steel constructionUsed to fasten semi-tubular rivet
Secures rivets to sash balance channel
Easy to use
Description
This rivet set tool is constructed from steel. It is used to fasten semi-tubular rivets. This set tool secures your rivet which joins the top and bottom guides to your sash balance channel.7. 25 NMD Brand T316 Stainless Steel Oval Head Semi Tubular 1/4X1/8 Hollow Rivets For Tonka Toy Trucks
Feature
Excellent Quality T316 Stainless SteelFor All Applications Ranging From Industry to Toys
8. 200 Pcs M4 x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone
Feature
Rivets can also be used with a rivet cap to improve appearance of clinched end.Long length rivets can be applied without buckling or bending the rivet shank.
Can be used to fasten similar or different materials of multiple work-pieces.
Inexpensive alternative to threaded fasteners, permanent fastener with good joint strength.
Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
Description
Descriptions:Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail.Permanent fastener with good joint strength.
Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.
Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Specifications:
Product Name: Semi-Tubular Rivet
Material:Aluminum
Shank Diameter(d): M4(0.16 inch)
Length(L): 10mm(0.4 inch)
Hole Diameter(d1): 2.4mm(0.09 inch)
Hole Depth(t): 4mm(0.16 inch)
Head Diameter(dk): 7.7mm(0.3 inch)
Head Thickness(k): 1.25mm(0.04 inch)
Color:Silver Tone
Net Weight: 84g
Package Content:
200pcs(+/-2%) x Semi-Tubular Rivet
9. 100pcs 88mm Bronze Double Cap Tubular Rivets Metal Tool Set Leather Crafts Stud
Feature
Double Cap Rivets are used for Fastening Leather and Garment Material Together.Double Cap Rivets will give you a nice Finished look on both sides of your Leather Piece.
These rivets are widely used in clothing, leather craft, paper craft etc.Work in DIY.
It measures with smoothly-designed round double caps to ensure both ends are covered in style.
They may be small but these multi-coloured rivets will surely stand out on your hand-made crafts!
Description
Item Descriptions:
-Double Cap Rivets are used for Fastening Leather and Garment Material Together.
-Double Cap Rivets will give you a nice Finished look on both sides of your Leather Piece.
-These rivets are widely used in clothing, leather craft, paper craft etc.Work in DIY.
-It measures with smoothly-designed round double caps to ensure both ends are covered in style.
-They may be small but these multi-coloured rivets will surely stand out on your hand-made crafts!
-A great add-on to your personalised clothing jeans bags or even for scrapbooking and other artsy projects.
Package:
100 x 8*8mm Double Cap Tubular Rivets
Item Specifications:
Material:Metal
Size:8x8mm
Color:Bronze
Type:Spring Clips
Sub-Type:Studs/ Rivets
Brand:Unbranded/Generic
10. 25 NMD Brand T316 Stainless Steel Oval Head Semi Tubular 1/8X1/8 Hollow Rivets For Industry, Tonka Toy Trucks, ETC,
Feature
Excellent Quality T316 Stainless SteelDescription
For All Applications Ranging From Industry To Toys11. 200 Pcs M3 x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone
Feature
Rivets can also be used with a rivet cap to improve appearance of clinched end.Long length rivets can be applied without buckling or bending the rivet shank.
Can be used to fasten similar or different materials of multiple work-pieces.
Inexpensive alternative to threaded fasteners, permanent fastener with good joint strength.
Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
Description
Descriptions:Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail.Permanent fastener with good joint strength.
Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.
Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Specifications:
Product Name: Semi-Tubular Rivet
Material:Aluminum
Shank Diameter(d): M3(0.12 inch)
Length(L): 10mm(0.4 inch)
Hole Diameter(d1): 1.8mm(0.07 inch)
Hole Depth(t): 3.2mm(0.13 inch)
Head Diameter(dk): 5mm(0.2 inch)
Head Thickness(k): 1mm(0.04 inch)
Color:Silver Tone
Net Weight: 44g
Package Content:
200pcs(+/-2%) x Semi-Tubular Rivet
12. 200 Pcs M3 x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone
Feature
Rivets can also be used with a rivet cap to improve appearance of clinched end.Long length rivets can be applied without buckling or bending the rivet shank.
Can be used to fasten similar or different materials of multiple work-pieces.
Inexpensive alternative to threaded fasteners, permanent fastener with good joint strength.
Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
