If you looking for superheterodyne radio receiver then you are right place. We are searching for the best superheterodyne radio receiver on the market and analyze these products to provide you the best choice.
Reviews
1. Superheterodyne Receiver Transmitter kit 433Mhz RF Wireless Module Antenna Arduino UNO DIY Kits
Feature
Support ASK / OOK modulation, the receiver sensitivity of -110dBm;Operating frequency: 433.92 MHz, bandwidth of about 150KHz;
Mains input voltage range: 3.0V-4.5V;Low power consumption;
Good local oscillator radiation suppression, multiple receiver module to work with (ie, more than single income) and will not interfere with each other, used together without affecting the receiving distance;
Multiple transmission rates, the general module for 2KHz, up to 10KHz;Temperature range: -40-85 C
Description
[Receiver module ] Product Model: WL101-341WL101-341 superheterodyne wireless receiver module is receiving UHF ASK demodulators support ASK and OOK modulation.
The receiver module has high sensitivity (-110dBm),Low-power performance, along with high dynamic range (greater than 60dB).
Module uses highly integrated chip, built front-end low-noise amplifier,Mixers, filters, frequency synthesizer circuit, etc., can maximize the signal optimization.
Mains input voltage range: 3.0V-4.5V;
Ultra-small size of 30.25 8.5 1 (mm)
External antenna: 32CM single core wire, wound into a spiral.
[Transmitter Module] Product Model: WL102-341
WL102-341 transmitter module is UHF ASK modulated transmitters, support ASK and OOK modulation.
The transmitter module integrates an analog PLL circuit and ASK modulation circuit, with a high level of integration, etc., can be applied with a short-range wireless communications.
Operating frequency 433MHz, transmit power is greater than 11dBm.
Operating frequency: 433.92 MHz;
Mains input voltage range: 2.0V-6.0V;
Low-power consumption shutdown mode current is less than 1uA;
Transfer rate up to 20KHz;
Launch distance :20-200 meters
Size: 16* 12 * 1mm
External antenna: 25cm ordinary multi-core or single-core line
Temperature range: -45-85 C
2. Demarkt LR680 Wireless Receiver IC Chip Superheterodyne Radio Frequency IC
Feature
Sensitivity -115 dBm (OOK modulation); through the FCC / ETSI safety regulations in Europe certification; frequency range 300MHz 440MHz;Power supply voltage 4.5V 5.5V, typically 5V; Operating current of 3.5mA (315MHz) and 5mA (433.92MHz)
The LR680 is a high sensitivity fully integrated ASK / OOK radio receiver chip that can be FCC / ETSI certified for use in radio frequency control in the 300MHz to 440MHz frequency range
Distance than SYN480 2 timesWith a chip shutdown function, support for non-continuous mode
Chip wake-up function
Description
Sensitivity -115 dBm (OOK modulation); through the FCC / ETSI safety regulations in Europe certification; frequency range 300MHz ~ 440MHz;Power supply voltage 4.5V ~ 5.5V, typically 5V; Operating current of 3.5mA (315MHz) and 5mA (433.92MHz)
Package included1pcsLR680 Wireless Receiver IC Chip Superheterodyne Radio Frequency IC
3. 433MHz Superheterodyne RF Link Transmitter and Receiver Kits 3400 Radio Frequency Receiving Module
Feature
wireless access control systemOperating voltage: 5.0VDC 0.5V
Working current: 2.5mA (5.0VDC)
Working principle: superheterodyne (VCO, PLL)
Operating frequency: 433.92MHz
Description
Using the best international RF integrated circuit design, with internal VCO and PLL circuit, frequency stability, high sensitivity, anti-interference ability. Widely used in wireless data transmission wireless remote control and other fields.
Superheterodyne 3400 wireless receiver module Scope:
1, wireless access control system
2, all kinds of anti-theft system
3, industrial remote control, telemetry, remote sensing
4, low baud rate data transmission
5, other harsh environment of wireless remote control
Superheterodyne 3400 wireless receiver module main parameters:
1. Operating voltage: 5.0VDC 0.5V
2. Working current: 2.5mA (5.0VDC)
3. Working principle: superheterodyne (VCO, PLL)
4. Work: OOK / ASK
5. Operating frequency: 433.92MHz
6. Operating temperature: -40 ~ +80 degrees
7. Sensitivity: better than -110dBm (50)
8. Rate: <9.6Kbps (315MHz, -95dBm)
9. Output signal: TTL level transparent transmission
10. Antenna length: 24 m (433.92 MHz)
4. ARCELI RXB6 433Mhz Superheterodyne Wireless Receiver Module Arduino/ARM/AVR
Feature
receiver sensitivity reach -116dBmOperating frequency:433.92 MHz
Good selectivity and spurious radiation suppression, and easy through CE / Fcc international certification
Good local oscillator radiation suppression, multiple receiver modules to work together (ie, more than single income) and will not interfere with each other, used together does not affect the receiving distance.
Temperature range: -40-85 Centigrade can work even in harsh ambient temperature.
Description
Characteristic:(1) receiver sensitivity reach -116dBm;
(2) Operating frequency:433.92 MHz;
(3) Power supply voltage input range: 3V-5.5V;
(4) Low power consumption, 3.3V @ 433.92MHz, 6.0mA
(5) Power Enable mode power consumption can be done lowest 50nA;
(6) has an analog RSSI signal strength level output;
(7) Good selectivity and spurious radiation suppression, and easy through CE/Fcc international certification;
(8) Good local oscillator radiation suppression, multiple receiver modules to work together (ie, more than single income) and will not interfere with each other, used together does not affect the receiving distance.
(9) Temperature range: -40-85 Centigrade can work even in harsh ambient temperature.
Applications
(1) car remote door switch (RKE);
(2) remote control door opener;
(3) wireless security alarm;
(4) remote control curtains;
(5) The wireless industrial controller;
(6) a wireless data transmission.
Include
1x RXB6 433Mhz Superheterodyne Wireless Receiver Module
5. 433Mhz Superheterodyne 3400RF Transmitter and Receiver Kit For Arduino ARM MCU
Feature
Bandwidth: 2MHz (315MHz, having result from testing at lowing the sensitivity 3dBm) Sensitivity: excel -105dBm (50)Working Voltage: 3V-12V Working Current: Max40mA (12V), min9mA (3V)
Frequency Error: +150kHz (max) Velocity: 10Kbps Modulation Mode: OOK/ ASK
Output Signal: TTL electric level signal entire transmit Working Voltage: 5.0VDC +0.5V Working Current: 2.5mA (5.0VDC)
Package Included: 1 x 433Mhz 3400 RF Transmitter & Receiver Kit
Description
The kit is consisted of transmitter and receiver, popular used for remote control TX Technical Specifications: Working Voltage: 3V-12V Working Current: Max40mA (12V), min9mA (3V) Working Frequency: 315MHz-433.92MHz Frequency Error: +150kHz (max) Velocity: 10Kbps Modulation Mode: OOK/ ASK RX Technical Specifications: Output Signal: TTL electric level signal entire transmit Working Voltage: 5.0VDC +0.5V Working Current: 2.5mA (5.0VDC) Working Principle: Superheterodyne Bandwidth: 2MHz (315MHz, having result from testing at lowing the sensitivity 3dBm) Sensitivity: excel -105dBm (50) Package Included: 1 x 433Mhz 3400 RF Transmitter & Receiver Kit6. The All-American Five Radio: Understanding and Restoring Transformerless Radios of the 1940'S, 50'S, and 60's
