When you want to find 7″ lcd case, you may need to consider between many choices. Finding the best 7″ lcd case is not an easy task. In this post, we create a very short list about top 10 the best 7″ lcd case for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 7″ lcd case:
Reviews
1. RS Raspberry Pi 7-Inch LCD Touch Screen Case, Black
Description
Note: Raspberry Pi Board and Raspberry Pi LCD Touch Screen are sold separately. Case compatible only with the Official Raspberry Pi 7" LCD Touch Screen.
This case is designed to house your Raspberry Pi board and the Official Raspberry Pi 7" LCD Touch Screen providing protection to the board and the display. The case also acts as a bezel to the display, improving its appearance while housing the board neatly behind it.
2. Raspberry Pi 7" Touchscreen Display
Feature
This 7" Touchscreen Display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way.The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.
Only two connections from the Pi to the display are necessary; power from GPIO (or USB) connection to the DSI port. The adapter board handles power, signal conversion, and touch input conversion.
Kit Contents: 7" Touchscreen Display Adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires
Description
Kit Contents: 7" Touchscreen Display Adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires Technical Specifications 7" Touchscreen Display. Screen Dimensions: 194mm x 110mm x 20mm (including standoffs) Viewable screen size: 155mm x 86mm Screen Resolution 800 x 480 pixels 10 finger capacitive touch Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port. Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi. Latest version of Raspbian OS required to operate correctly. Note: The display works with all existing Raspberry Pi models, however the mounting holes only line up with the newer board design of the A+, B+ and Pi 2.3. Case for The Official Raspberry Pi 7" Touchscreen Display - Building Block Compatible Front and Adjustable Angle
Feature
Pivoting adjustable angle and also wall mountableWorks with Raspberry Pi HAT boards
Works with Official Pi display and Raspberry Pi A+,B+,2,3B, and 3B+
HDMI port on the Raspberry Pi is not accessible with this case
Building block compatible Raspberry Pi camera case that attaches to back included
Description
Please note that the HDMI port on the Raspberry Pi is not accessible with this case. This updated case design is now compatible with the Raspberry PI 3 Model B+ launched in March 2018. The super slim design allows you the ultimate versatility in mounting the case almost anywhere. The case can easily be adjusted to any angle. Small metal mounts are also included that allow you to create a minimal footprint and attach to walls or any surface. The case also works with Raspberry Pi HAT boards. This case version has building block compatible studs on the front.The case also has 75mm VESA mounting points on the back. The included building block compatible camera case works with Pi camera versions 1 and 2. The case also includes a micro usb splitter cable that you can use to power the display and Raspberry Pi at the same time. The case is made out of strong ABS plastic. Disclaimer: Raspberry Pi and Official Raspberry Pi display not included. Works with Official Pi display and Raspberry Pi A+,B+,2,3B, and 3B+4. Raspberry Pi 7 Inch Monitor HDMI - SunFounder 7" 1024600 HD LCD Display Screen Built in Speaker for Raspberry Pi 3 Model B+ 3B 2B B+ with RPi Case Holder
Feature
The 7 inch IPS LCD Monitor with high resolution of 1024600 pixels supports key operation.The IPS screen features the wide visual angle,fast response speed and accurate color rendition.
Supports multiple video input interfaces: HDMI, VGA and USB output of 5V/2.5A.
Includes 3 pieces of transparent acrylic plate in different colors to protect the Raspberry Pi.
Equipped with reserved fixing holes for control boards - suitable for Raspberry Pi 3 model B+,3 model B, 2 model B, and 1 model B+.
Description
This 7 inch IPS LCD Monitor with a high resolution of 1024600 pixels supports key operation. It is protected by a case with stand which is made of high quality black acrylic. The monitor supports multiple video input interfaces such as HDMI, VGA and 5V/2.5A output interface. Besides, an HDMI cable is included so you can start the screen quickly and conveniently.
With the keys on the monitor back, you can choose to control the screen by pressing the keys. 3 pieces of transparent acrylic plate in different colors are provided to protect the Raspberry Pi. It is designed with fixing holes at the back, supporting to mount the Raspberry Pi 3 model B+,3model B, 2 model B, 1 model B+ etc.
Package Include
1 x 7 Inch HDMI IPS LCD Monitor
1 x 12V/2A power adapter
1 x USB cable
1 x HDMI cable
1 Set x Acrylic plate (3pcs in 3 colors)
1 x Acrylic for camera
1 x SD card hook
4 x M2 x 6 Screw
2 x M2 x 6 Nut
2 x Heat sink
1 x Operation guide
5. Waveshare Bicolor Case/Cover for 7inch Capacitive Touch Screen HDMI Interface LCD Combines Raspberry Pi 7inch LCD and Pi to an All-in-one Device
Feature
It includes bicolor case and bottom holder designed for 7inch capacitive touch screen LCDIt will combines the LCD and supported mini-PC into an All-in-one device.
For use with Waveshare 7inch HDMI LCD,not compatible with the official one.
Features mounting holes for Raspberry Pi B/A+/B+/2B/3B/3B+, Banana Pi, and BB Black
How to install:http://www.waveshare.com/wiki/File:7inch-HDMI-LCD-Bicolor-case-assemble.jpg
Description
OverviewThis product includes bicolor case and bottom holder designed for 7inch capacitive touch screen
LCD. It will combines the LCD and supported mini-PC into an All-in-one device.
For use with:
7inch HDMI LCD (B)
7inch HDMI LCD (C)
NOT compatible with:
7inch HDMI LCD
Material : high quality bicolor Acrylic, black and white
Comes with bottom holder, optional tilt angle, 45 or 60
Features mounting holes for Raspberry Pi B/A+/B+/2B/3B/3B+, Banana Pi, and BB Black
PACKAGE CONTENT
Bicolor Case for 7inch LCD 1
Screws Pack 1
6. 3.5 TFT Touch Screen,Quimat 320x480 Resolution LCD Display with Protective Case, 3Heat Sinks and Touch Pen for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B
Feature
3.5 inch resistive touch screen Module SPI Interface for Raspberry Pi 2 3 B/B+/A+ /A/B, Raspberry Pi not included. 320*480 resolution, better display.Upgraded for Raspberry Pi B+; No external power supply needed. Software package contains everything you need to start from zero.Supports Raspberry system, enables your system to play videos (supports multi formats, MP4 and so on); take photos by touching; support software keyboard (system interaction without keyboard/mouse).
Pi 3 Model B case, 2016 Update Better RPI 3 case - High quality PC Protective Case with 3x Heat sinks for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+.
Please note that you need to install our Jessie OS with the installed drivers on a new or format SD card, if not,you will be starting at a white LCD panel.
Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.
Description
Description: 3.5inch LCD panel descriptionDesigned for Raspberry Pi, an ideal alternative solution for monitor
Supports any revision of Raspberry Pi (directly-pluggable)
Driver provided (works with custom Raspbian directly)
320480 resolution, better display
Supports Raspbian system, enables your system
play videos (supports multi formats, MP4 and so on)
take photos by touch pen (up to 17 camera modes)
Support software keyboard (system interaction without keyboard/mouse)
Key Parameters
LCD Interface: SPI
LCD Type: TFT
Backlight: LED
Colors: 65536
Aspect Ratio : 8:5
Resolution: 320*480 DOTS
Power Consumption: TBD
Backlight Current: TBD
Protection Case with 3x Heat sinks
Designed SPECIALLY for Raspberry Pi 3 Model B; Full access to all controls and features
The protective case consists of five-piece PMMA enclosure that snaps together around Raspberry Pi
3 Model BProvides the best available protection/accessibility for Model BProtect and secure
your Raspberry Pi from shocks, scratches and dust
Package Contains:
1x 3.5inch Touch Screen LCD for Raspberry Pi (all versions)
1x Touch pen
1x Protection Case
3x Heat sinks
1x CD instruction
Note:
Raspberry Pi 3 Model B NOT Included
We have tutorials and software for you to download, please contact us
by email to get all information.
7. TFT Touch Screen, Kuman 3.5 inch 320x480 Resolution TFT LCD Display with Protective Case + 3 x Heat Sinks+ Touch Pen for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B (TFT Touch Screen)
Feature
3.5 inch resistive touch screen Module SPI Interface for Raspberry Pi 2 3 B/B+/A+ /A/B, 320*480 resolution, better display. Upgraded for Raspberry Pi B+; No external power supply neededSoftware package contains everything you need to start from ground zero. Compatible with Raspberry Pi 3 B RPi 2B/B+/A+ /A/BRaspberry Pi not included
Pi 3 Model B case, 2016 Update Better RPI 3 case - High quality PC Protective Case with 3x Heat sinks for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+
Please note that you need to install our jessie OS with the pre-installed drives on a new or format SD card, if you dont install our jessic OS with the pre-installed drives, you will be starting at a white LCD panel. We have do test on OS, if you want to use other system, maybe you need to add drivers by yourself.
Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.
Description
3.5inch LCD panel description
Designed for Raspberry Pi, an ideal alternative solution for monitor
Supports any revision of Raspberry Pi (directly-pluggable)
Driver provided (works with custom Raspbian directly)
320480 resolution, better display
Take photos by touch pen (up to 17 camera modes)
Support software keyboard (system interaction without keyboard/mouse)
Key Parameters
LCD Interface: SPI
LCD Type: TFT
Backlight: LED
Colors: 65536
Aspect Ratio : 8:5
Resolution: 320*480 DOTS
Power Consumption: TBD
Backlight Current: TBD
Protection Case with 3x Heat sinks
Designed SPECIALLY for Raspberry Pi 3 Model B; Full access to all controls and features
The protective case consists of five-piece PMMA enclosure that snaps together around Raspberry Pi 3 Model BProvides the best available protection/accessibility for Model BProtect and secure your Raspberry Pi from shocks, scratches and dust
Package Contains
1x 3.5inch Touch Screen LCD for Raspberry Pi (all versions)
1x Touch pen
1x Protection Case
3x Heat sinks
1x CD instruction
Note:
Raspberry Pi 3 Model B NOT Included
We have tutorials and software for you to download, please contact us by email to get all information.
You want to use the gpio pins of the raspberry motherboard to plug 3.5inch LCD panel and other components at the same time? Recommend Kuman K80 GPIO Breakout Expansion Kit ASIN:B074DSMPYD
8. Case for Raspberry Pi 3 + 3.5" Touchscreen
Feature
Works with Raspberry Pi 3 + Waveshare 3.5", RPi LCD (B), 320x480, IPS, screenAll RPi ports are accessible!
Stable base => Very practical for touchscreen applications
Very easy to assemble => Comes with screws and rubber stick-on feet
Screws stabilize the RPi internally, making the unit more stable when touching the screen, and plugging in accessories
Description
NOTE: This case is designed specifically for a Raspberry Pi 3 with a Waveshare 3.5", RPi LCD (B), 320x480, IPS, screen. It will not work with other Raspberry Pi models, and may not fit other touchscreens (we have only tested with the one listed above). The Raspberry Pi 3 and Touchscreen are NOT included. This is the plastic enclosure only.
The most stylish way to show off your Raspberry Pi 3.5" touchscreen project! This injection molded plastic enclosure is made specifically to house a Raspberry Pi 3 board along with a 3.5" touchscreen. Components include: Enclosure (2 parts: front and back, grey-black plastic), screws for assembly, and stick-on "feet" for the bottom of the enclosure. All your RPi 3 ports will be accessible in this gorgeous case.
The design is optimized so you can screw the RPi in place. This keeps the Pi stable within the enclosure when you are using the touchscreen, or are plugging/unplugging accessories.
9. Eleduino Raspberry Pi Official 7" Touchscreen Display Bamboo Case
Feature
The case support raspberry pi offical touchscreen onlynot contain the pi and touchscreenMade of top grade original bamboo, environmentally,sturdy, looks simple yet stylish and elegant
All protection to the back of the display, leaving your touchscreen entirely unimpeded and all Raspberry Pi ports totally accessible
This case is also constructed with 2 sturdy legs to hold your touchscreen at an ideal viewing angle
The stands compatible with the Rpi 3 , Rpi 2 , Model B+, Model A+ mainboard and perfect fit the Eleduino mainboard protective case
Description
Packing list:1, Official 7" Touchscreen Bamboo Case*1
2, Rubber feet*1
10. Etoput 7 Inch Touch Screen Case Holder for Raspberry Pi 3/3B+ (B Plus) LCD Touch Screen Display Monitor
Feature
Suitable for Raspberry pi 7 inch TFT touch screenBlack acrylic material, not include screen, rapberry pi and cable
Easy to install, please contact us if you have any problems with the installation.
Raspberry Pi Board can be installed in the back, saving space
Every pieces of case with film,please remove it before you use, very easy to use even no need instruction
Description
This is a raspberry pi 7 inch display bracket, is it suitable for your 7 inch touch screen,please see the ads picture, or contact us to help you to confirm whether it is suitable for your display ,
the bracket made of acrylic cutting, easy installation, you are worth for your Display add a bracket!
Note: Suitable for LANDZO 7 Inch Touch Screen
Package including:
1 x Acrylic case for Raspberry pi 7 inch LCD screen
