When you want to find nicd battery charger, you may need to consider between many choices. Finding the best nicd battery charger is not an easy task. In this post, we create a very short list about top 10 the best nicd battery charger for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 nicd battery charger:
Reviews
1. EBL 8 Bay AA, AAA, Ni-MH, Ni-CD Rechargeable Battery Charger - Upgraded ETL Certified
Feature
[$10.99 Only - EBL 20 Years Celebrating & Thanks] This EBL 808 charger can charge 2/4/6/8 AA/AAA Ni-MH/Ni-Cd rechargeable batteries.Controlled by MCU, automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
Using -V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
AC 100-120V 50/60Hz input, 2.4V DC output shorten the time of charging.
Constant current charging would protect the batteries against current fluctuation and keep using the charger safely.
Description
Model:EBL-C808 Latest Version
Features:
LED display the charging statues: shows orange(charging) - shows green(full charged).
Controlled by MCU, automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
Using -V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
Compatible:
Can both charge AA and AAA Ni-MH Ni-Cd rechargeable batteries(Do not charge alkaline or Lithium batteries)
How many batteries can be charged at a time:
2/4/6/8 AA or AAA batteries together at a time, need to charge batteries in pairs, do not charge uneven amount of batteries
4 LEDs show the status of charging, never charge 1 AA + 1 AAA together at 2 slots which are controlled by 1 LED
Charging Time Table:
2 to 8 pcs AAA 500-1200mAh: 3 - 8 hours(180mA output)
2 to 8 pcs AA 1300-2800mAh: 6 - 15 hours(200mA output)
Attention:
* Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger.
* Never mix charge different type and different capacity of batteries under the same LED indicator.
* Using environment: 0 to 40, it is normal phenomenon that the battery is warmer than room temperature when charging.
* Do not disassemble or reassemble the charger by yourself for safety reason.
Portable and Lightweight:
Dimensions: 6.9 x 3.0 x 1.0 inch
Weight : 6.0 oz.
2. EBL LCD Smart Individual AA AAA Rechargeable Battery Charger for Ni-MH Ni-CD
Feature
Individual charging status for each slot, can freely charge 1,2,3,4 Ni-MH Ni-CD AA/AAA rechargeable battery.Smart LCD to show its charging progress separately, the battery icon stop flashing when fully charged.
Advanced MCU control and -V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection.
Trickle charged mode will help maximize the capacity of battery to full.
Worldwide usage: 100-240V AC, 50/60 Hz.
Description
ModelEBL 907 is professional on AA, AAA Ni-MH/Ni-CD rechargeable battery.
Individual function helps to charge batteries in pairs and single.
Features of charger
Input: 100-240V AC, 50/60 Hz 500mA Max
Output:
1x AA 1.2VDC 2000mA, 1x AAA 1.2VDC 1000mA;
2x AA 1.2VDC 1000mA, 2x AAA 1.2VDC 500mA;
3x AA 1.2VDC 500mA, 3x AAA 1.2VDC 250mA;
4x AA 1.2VDC 500mA, 4x AAA 1.2VDC 250mA;
Environmental Condition
Using environment temperature: 0 to 40, Humidity 80%
Storage environment temperature: -10 to 40, Humidity 60%
Working temperature
Surface temperature of charger 60
Surface temperature of battery 45
Packages
1x EBL 907 Battery Charger
1x User Manual
3. Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor
Feature
Smart Charger with automatic voltage detection. Best for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours. Current updated Version 2
Worldwide usage with 120-240V AC.
Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
Safety protection fuse for over current, short circuit & reverse polarity protection *Meets UL 60950-1 Safety Standards. Buy with confidence, your charger includes a 12-month warranty.
Description
Accessories Included1 standard Tamiya connector.
1 connector adapter from Standard to Mini Tamiya.
1 set of alligator clip adapter with standard Tamiya connector on one end.
1 Temperature sensor
Specification
Input: AC100-240V
Output: 7.2-12V 0.9or1.8A
Operation Instruction
Connect battery pack to output connector and plug AC power source
Make sure battery polarity is connected correctly (Red wire is positive)
Charger will detect battery voltage automatically, Red LED will be on during charging
When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery
Battery pack capacity should be 900mAh or higher
Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage
Caution
The charger is designed for indoor use only. Don't leave the charger unattended during charging
The charger should be positioned horizontally and in well ventilated condition, avoid water and keep away from flammable/explosive goods
Don't cover the charger when charging, ambient temperature shall not be more than 40oC
Don't leave the batteries and chargers on wood surface/carpet
Cut off the power supply before connect/disconnect the charger with batteries
Don't disassemble the charger, High voltage inside!
WARNING - DO NOT CHARGE LiPO BATTERIES
-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium
-Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery
**Failure to follow these warnings may result in fire or personal injury
Contact our customer support team if you are unsure if your battery can be charged
4. Tenergy Universal RC Battery Charger for NiMH/NiCd 6V-12V Battery Packs, Fast Charger for RC Car, Airsoft Batteries, Compatible with Standard Size Tamiya/Mini Tamiya/Alligator Clips Connectors
Feature
FAST CHARGE - NiCd/NiMH battery pack charger that provides 1Amp or 2Amp options. Quickly charge your battery packs; 1Amp is recommended for 1000-1800mAh packs, and 2Amp is recommended for any pack over 2000mAh.UNIVERSAL SMART CHARGER - Charges battery packs based on automatic voltage detection. Charges your NiMH or NiCd battery packs that are 6V, 7.2V, 8.4V, 9.6V 10.8V, and 12V battery packs.
EASY TO USE - A great airsoft battery charger or RC car battery charger with simple LED indicators for charging status. Green light for fully charged and red light for charging.
HOBBY BATTERY CHARGER - Charge NiMh/NiCd battery packs for Airsoft, RC Cars, or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, standard Tamiya to Alligator Clips adapter.
TENERGY SAFE - To give you peace of mind, Tenergy's chargers meet rigorous American UL 60950-1 safety standards. For added security, the charger also includes a temperature sensor to prevent over-heating while charging.
Description
Features
-Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh
-Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours
-Automatically charging ending with negative delta V
-Worldwide usage with 120-240V AC
Accessories Included
1 standard Tamiya connector with Temperature Sensor
1 adapter from standard Tamiya to Mini Tamiya
1 adapter from standard Tamiya to a pair of alligator clip
Charger Specification
Input: AC 100-240V
Output: 6-12V, 1A or 2A
Operation Instruction
-Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
-Battery pack must be made by high drain current cell
-Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse
Caution
The charger is designed for indoor use only. Don't leave the charger unattended during charging
The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods
Don't cover the charger when charging, ambient temperature shall not be more than 40oC
Don't leave the batteries and chargers on wood surface or carpet.
Cut off the power supply before connect or disconnect the charger with batteries
WARNING - DO NOT CHARGE LiPO Batteries
-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.
-Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery.
Failure to follow these warnings may result in fire or personal injury.
Contact our customer support team if you are unsure if your battery can be charged.
5. EBL Smart Battery Charger for C D AA AAA 9V Ni-MH Ni-CD Rechargeable Batteries with Discharge Function & LCD Display
Feature
Ultra compatible 1-4 AA/AAA/C/D and 1-2 9V Ni-MH/Ni-Cd rechargeable batteries, independent charging slot, can charge different size batteries freely.MCU controlled, adopts using -V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
AC and DC input design (AC cable provided only), applied to worldwide voltage - AC 100-240V 50/60Hz, convenient everywhere.
Automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
Constant current charging mode would protect the batteries against current fluctuation and keep using the charger safely.
Description
Two Model - Charge & DischargePress the blue button for charging and discharging
"CHG" -- Charging; "DISCHG" -- Discharging;
"ERROR"-- install the battery incorrectly or the battery is broken one.
MCU controlled, Safety Protected
Negative delta V (- V) cut-off function (except for 9V batteries), overcharge protection, short circuit protection and non-rechargeable or bad cell detection make it more easier for usage.
Compatible Models
For Ni-MH Ni-CD rechargeable batteries: 1/2/3/4 AA, AAA, C, D and 1/2 9V batteries.
Correct Operations and Stockpile for Better Using
* LED will not turn off when fully charged for 9V battery, please remove the 9V battery timely when fully charged.
* Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger.
* Using environment: 0 to 40, it is normal phenomenon that the battery is warmer than room temperature when charging.
* Do not disassemble or reassemble the charger by yourself for safety reason.
Charging Time Table:
1pcs Battery Type (Ni-MH) Capacity Charging Time (approx)
AAA 500-1200mAh 1-3 hours
AA 1300-2800mAh 1.5-3.5 hours
C 1800-5000mAh 2-6 hours
D 1800-10000mAh 2-10 hours
9V 150-600mAh 5-20 hours
What You Get
EBL Battery Charger x1
User Manual x1
AC Cable x1
6. EBL Individual Smart Battery Charger for AA AAA Ni-MH Ni-CD Rechargeable Batteries
Feature
Individual charging status for each slot, can charge battery singly or in pairs4 LEDs show the charging process.the LEDs display RED when put batteries into the charger;the LED light become weaker and weaker along with the charging process ;automatically switches to trickle charge when charging is complete to ensure maximum battery capacity
Very safe products,good at shedding heat,automatically stop charging when voltage up to 3.4V
Short Circuit & Input Voltage Detection/Protection
DC 5V 1000mA input for worldwide usage, 250mA*4 output
Description
EBL-C807 - Upgraded Model on 2018-5-8Features:
USB input, it could be powered by power bank, AC adapter, more convenient
LED state the charging statues : on(charging)-shows green(fully charged)
Overheat-detection to prevent over-charging
Short circuit protection and reverse polarity protection
Negative delta V (- V) cut-off function,automatically cut off when fully charged
Compatible:
Can both charge AA and AAA Ni-MH Ni-Cd rechargeable batteries(Do not charge alkaline or Lithium batteries)
How many batteries can be charged at a time:
1 to 4 AA or AAA batteries at a time, single or in pairs are both OK, no need to charge batteries in pairs any more
Input and Output:
Input: 5V 1.0A Worldwide voltage
Output: DC 1.2V 250mA*4, 0.4V output voltage more than most similar charger means faster for charging
Charging Time Table:
1 to 4pcs AAA 500-1200mAh: 1.5 - 4 hours(180mA output)
1 to 4pcs AA 1300-2800mAh: 1.5 - 6 hours(200mA output)
Portable and Lightweight:
Dimensions: 175 x 7.7 x 2.6 (cm)
Weight : 170(g)
7. Nitecore New i4 2016 Intellicharger Smart Battery Charger for Li-ion IMR Ni-MH NiCd
Feature
Twice the charging speed of the i4 charger, up to 1.5A. Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteriesOptimized charging design for IMR batteries, with new IMR battery recovery feature
Automatically detects battery power status and displays charging progress, and automatically stops charging when complete
For use with Li-ion / IMR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650; Ni-MH / NiCd: AA, AAA, AAAA, C, D
For use with Rechargeable batteries only. Do not attempt to charge primary cells such as Alkaline, Zinc-Carbon, Lithium, CR123A, CR2 or any other unsupported chemistry
Description
Features- Active Current Distribution (ACD) Technology
- Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries
- Capable of charging four batteries simultaneously
- Automatically detects battery power status and displays charging progress
- Made from fire resistant, flame retardant PC material
- For use with Li-ion, IMR, LiFePO4, Ni-MH/Ni-Cd rechargeable batteries only
- Do not leave working charger unattended
- Do not attempt to charge primary cells such as Alkaline, Zinc-Carbon, Lithium, CR123A, CR2 or any other unsupported chemistry
- Never charge / discharge battery having evidence of leakage, swelling, damaged outer wrapper, color-change or distortion
- Do not touch hot surfaces. Batteries or device may become hot at full load or high power charging/discharging
- Remove all batteries and unplug charging unit from power source when not in use
- See Included User Manual for additional Safety Instructions
8. EBL 12 Bay LCD AA AAA 9V Battery Charger for Rechargeable Batteries, New Released - ETL Certified
Feature
Upgraded (ETL Certified) Charging freely - Independent charging channels, can charge 1-10 pieces AA/AAA Ni-Mh/Ni-CD rechargeable batteries and 1-2 pieces 9V Ni-Mh/Ni-CD/Li-ion rechargeable batteriesLCD Display - Smart LCD screen will indicate the whole charging process for the AA/AAA batteries and the LED light will indicate the 9V's.
Safety guarantee - Battery detection technology, automatically turn to trickle charge when batteries are full charged.
Intelligent control - Advanced MCU control and -V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection.
Biggest Save - Best product but lowest price and high efficient after sale service always here to help.
Description
ModelEBL-999 Rechargeable Battery Charger - For AA AAA Ni-MH Ni-CD Rechargeable Battery and 9V Ni-MH Li-ion Rechargeable Battery
Convenient for using
Freely charge 1/2/3/4......10 pieces AA/AAA NI-MH/NI-CD batteries and 1 or 2 pieces 9V batteries
Safety protected
* Controlled by MCU, and using -V pulse charging, automatically when charged full (except for 9V battery)
* Short circuit protection and reverse polarity protection
* Overheat-detection to prevent over-charging
Compatible
AA/AAA NI-MH/NI-CD rechargeable battery, 9V Ni-MH Ni-CD Li-ion rechargeable battery. ( Not For: alkaline battery)
Input and output
Input: AC 100-120V AC 50/60Hz. Worldwide voltage
Output: 2.5-3.5V DC 3.3A
How to use the EBL-999
For AA/AAA Batteries:
Can charge the batteries individual, 10 bays/slots. Easy charge 1/2/3...9/10 AA AAA batteries
LCD shows charging process. Charging - LCD will light up; Charged full - LCD will automatically turn off.
For 9V Batteries:
Can charge 1 or 2 pcs 9V Ni-MH Ni-CD Li-ion battery
LED light shows charging process. Charging - LED light will flash after 1 second; Charged Full - The LED light will automatically turn off.
Package
1 x EBL-999 Battery Charger
1 x User manual
1 x AC Adapter
9. Tenergy TN145 AA AAA Battery Charger, 8-Slot Household Battery Charger, AA Cell Battery Charger with Individual Bays and LED indicators, Smart Charger for NiMH/NiCd Rechargeable Batteries
Feature
SAVE TIME & CHARGE MORE - The Tenergy TN145 is a NiCD/NiMH AA, AAA charger that can charge up to 8 batteries at a time. Suitable for 500-2500mAH AA/AAA rechargeable batteries, it's best utilized in homes that require a lot of batteries. Replace one-time use batteries with rechargeable ones for standard use appliances such as computer peripherals, clocks, controllers, solar lights, audio devices, etc.INDIVIDUAL CHARGING - Charge any number of batteries in any of the 8 slots. No longer will you need to charge batteries in pairs of 2/4/6/8 but have individual charging throughout each battery with the smart individual battery charger.
EASY-TO-USE INDICATORS - Simple to use, the red LED indicator lights up on the rechargeable AA battery charger for when it is on and charging. Once it has stopped charging the LED indicator light will turn off and the battery is ready to use.
CHARGE BOTH AAA & AA - Pair the Tenergy AAA & AA Smart Charger with standard rechargeable batteries as it can charge both types at a time. Based on the AA or AAA type, the TN145 Smart Charger will charge at a safe current of 250mAh (AA) or 100mAh (AAA) that is better at prolonging the battery lifespan.
SAFETY PROTECTION - Backed by CE certification, the Tenergy TN145 household AA battery charger has built in short circuit and reverse polarity protection. The built-in 10 hour IC timer control prevents individual batteries from being over-charged thus protecting their lifespan. Buy with confidence, your charger includes a 12-month warranty.
Description
Features and Benefits:Suitable for 500-2500mAh NIMH AA/AAA Batteries.
Recharges NiMH/NiCd batteries 1 - 8 pcs of AA, AAA at a time.
Automatic charging current selection for size AA and AAA.
Built-in IC timer control for over-charge protection.
LED to indicate proper charging.
Charging current: AA=250mAh and AAA=100mAh.
Input: 100-240V AC 50/60Hz for worldwide usage.
Short circuit protection and reverse polarity protection.
Includes:
Tenergy TN145 8-Bay AA/AAA NiMH/NiCd Battery Charger
Packaging: Blister card
Specifications:
Input: AC 100V~240V 50HZ/60HZ
Output: AA 1.2V-250mA; AAA 1.2V-100mA
Charging timer: 10 hours
Weight: 9.3 oz; 264 g
Dimensions: 190x100x27mm
Color: Silver
Note: TN145 charger is designed to work with button top rechargeable batteries, does not work with flat top batteries.
10. AA Battery Charger, Smart AA AAA Battery Charger for NiMh NiCd Rechargeable Batteries
Feature
Automatically stop charging when detecting short circuit, defective or non rechargeable batteriesVoltage control instead of current control makes sure your batteries are fully charged
The charger will detect the voltage of batteries every 1 minute to avoid over-charged
When batteries are fully charged, the charger will turn to trickle charge mode
It's a universal charger for AAA/AA size Ni-MH/Ni-CD batteries
Description
Specification:Charging Input: AC 100-240V 50/60HZ 10W, DC 12V 800mA
Charging Output: AAA/AA/C/D: 1000mA (Total); 9V: 30mA (Each)
Discharge Current: 200-300mA
Charging Efficiency: >85%
Size: 7.7*3.6*1.8 inches
Weight: 9.2 ounces
Features:
Can charge 2/4/6/8 pcs AAA/AA MH or Ni-CD rechargeable batteries
Charging time table:
2 to 8pcs AAA 500-1200mAh: 1.5 - 5 hours(150mA output)
2 to 8pcs AA 1000-2800mAh: 1.5 - 5 hours(280mAh output)
Batter Heat Dissipation:
heat dissipation help Mr.Batt 701 battery charger has a batter function: overheat-detection to prevent over-charging
Auto and Smart Indicator:
Mr.Batt battery charger with LED indicator: Red means charging;Green means fully charged
Attentions:
*do not short circuit, dismantling or in high temperature, to avoid danger
*when not used for a long time the charger, it should be from the power supply socket plucked
*when in use, this product will be a slight fever, this belongs to normal phenomenon, does not affect product safety and service life
Package:
1 x Universal Battery Charger
1 x AC Adapter
1 x User Manua
