Finding the best 240sx exhaust s13 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Spec-D Tuning MFCAT3-240SX89T-SD Nissan 240Sx S13 3" Inlet SS Titanium Burnt Tip Catback Exhaust Muffler
Feature
Nissan 240Sx S13 3" Inlet SS Titanium Burnt Tip Cat Back Exhaust MufflerDescription
Brand new in original packaging. Exactly the same as shown in the picture! Made of high quality full T-304 stainless steel. Japanese N1 style. Comes with removable silencer. Increases up to 15 hp. Deep smooth tone guaranteed. CNC mandrel bent. Comes with gaskets, hanger and bolts. 4.5" outlet titanium burnt tip 3" piping. Do not come with installation instructions. Professional installation highly recommended. Fitment : 89-94 Nissan 240SX S13.2. For Nissan 240sx S13 Silvia 3" Stainless Catback Exhaust Muffler System Kit Silencer
Feature
Warranty: Yes | Condition:NewInstallation Guides: No Installation Guides Included
Surface Finish: Stainless Steel Polish
Fitment: 1989-1994 Nissan 240SX S13
Piping Diameter: 3.0" / 75mm | Muffler Tip Size:4.5"
Description
The performance exhaust system excels in every imaginable aspect. Theaim is to improve the nearly perfect by giving it that certain something. This catback outstanding design and precise handcrafted work refine all facets of the exhaust sound. The most remarkable aspect is the deep sound with a clean tone at all rpm ranges, which underlines the characteristics of this catback. The silencer is a sound restrictor , but at the same time also make it possible to shut down any vibration or drone frequencies in the interior, in order to enable an undisturbed conversation and comfortable drive. A performance catback exhaust is designed to free up some of the power in your engine, allowing for a quicker and more efficient path for exhaust gases to escape. Not only does this allow your engine to breathe bettter, which allows it to create more power. In conclusion a performance catback exhaust system is responsible for increasing horsepower , torque , throttle response , and mpg. Stainless Steel Catback Exhaust 100% Brand New Items, Never Used Or Installed High Performance Stainless Steel Catback Exhaust System CNC Machined T-304 Mandrel Bent Stainless Steel Piping And TIG Welded Steel Flanges Made By OEM Approved & ISO Certified Manufacturers With Materials That Meets Or Exceeds StrictOEM Requirements Direct Bolt-On Fitment; No Modifications Required Specifications (Estimated): Tip Diameter: 4.5" Piping Diameter: 3" NOTES: Please remember to check all current exhaust rubber bushings to makes sure they are still able to be reused before installing No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation FITMENT: 1989-1994 Nissan 240SX3. 1989-1994 NISSAN 240SX LE SE XE S13 BLACK CATBACK SYSTEM W/ 4.5" EXHAUST TIP
Feature
High quality SUS-304 Stainless Steel Made with Chrome Finish with Black Canister. Designed for high performance as well as meeting sound level standardsFully Mandrel bent (not Kink bent like OEM or competitors.) With its deep throaty tone, it echoes its racing lineage.
Optimize torque in the low to mid speed range. 3" Stainless Steel Piping with 4.5" Exhaust Tip (come with removable silencer)
N1 Design to Gain More Horse Power, Faster Response, Averaging 10-15 Extra HP
Fitment: 1989-1994 Nissan 240SX
Description
High quality SUS-304 Stainless Steel Made with Chrome Finish with Black Canister
Designed for high performance as well as meeting sound level standards
Fully Mandrel bent (not Kink bent like OEM or competitors.)
With its deep throaty tone, it echoes its racing lineage.
Optimize torque in the low to mid speed range
3" Stainless Steel Piping with 4.5" Exhaust Tip (come with removable silencer)
N1 Design to Gain More Horse Power, Faster Response, Averaging 10-15 Extra HP
Fitment: 1989-1994 Nissan 240SX
4. Nissan Silvia 240SX Catback Exhaust System 4" Tip Muffler - S13
Feature
Made of high quality T-304 stainless steel.TIG welded CNC machine flange for resistance against pressure and corrosion.
Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow.
Increase engine output and efficiency.
Dyno proven to instantly increases 15 to 25 horsepower or low end torque
Description
Upgrading vehicle's exhaust system is a great way to build horsepower, free up trapped torque, and improve upon restrictive factory systems. The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make a world of difference on your vehicle. The net result is lower auto exhaust backpressure, more horsepower, more torque, and a much better sound.Package Included:
Compatible with:
5. Nissan 240SX S13/S14 2.4L Stainless Steel High Performance Exhaust Pipe
Feature
Increases High Flow Air Rate and Maximizes PerformanceDyno Proven Increases Low End Torque and Horse Powers; Instantly Gains up to 10 - 15 Hp. / Tq
TIG Welded, CNC Machined Flange and Mandrel-Bent Piping / O2 Sensor Bung Insertion and Metal Gasket Included
Inlet Size: 3" / Outlet Size: 3"
For Offroad or Race Track Use Only
Description
The most restrictive part of any exhaust system is the catalytic converter. The stock catalytic converter is meant to filter the flow of exhaust gases to reduce the amount of harmful gases into the atmosphere. Because of this, lots of potential performance is restrained. High Flow Test Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. The result brings out the vehicle's performance potential by giving it a free high flowing exhaust system.Package Included:
Compatible with:
6. Spec-D Tuning MFCAT3-240SX89 Nissan 240Sx S13 Se Xe Base Turbo Catback Exhaust System
Feature
Nissan 240Sx S13 Se Xe Base Turbo Cat Back Exhaust SystemDescription
Brand new in original packaging. Exactly the same as shown in the picture! Made of high quality full T-304 stainless steel with shinny chrome finish. Japanese N1 style. Comes with removable silencer. Increases up to 15 hp. Deep smooth tone guaranteed. CNC mandrel bent. Comes with gaskets, hanger and bolts. 4" outlet tip 3" piping Do not come with installation instructions. Professional installation highly recommended. Fitment : 89-94 Nissan 240SX S13 TURBO7. Nissan 240SX S13 SOHC 4-1 Stainless Steel Exhaust Manifold Header
Feature
Made of high quality steel with 4-1 direct bolt-on designTIG welded CNC machine flange
O2 sensor bung insertion / Metal gasket included / Inlet: 1.875" / Outlet: 2"
Increase high flow air, instantly gain 10 to 15 Hp. / Tq
Application: 89-90 Nissan 240SX S13 SOHC engine only (Instruction not included, Professional installer is highly recommended)
Description
The exhaust manifold found on the 1989-1990 Nissan 240SX SOHC 4 Cylinder Engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.4L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:
Compatible with:
8. 3" Turbo Exhaust DownPipe Fit For 1989 -1998 Nissan 240sx S13 S14 SR20DET
Feature
Inlet: 3 Inches / Outlet: 3 InchesIncrease Engine Output And Efficiency.
Significantly Improves Exhaust Flow.
C.N.C. Designed With Stainless Steel For Stylish Looks And Long Lasting Performance.
1989 -1998 Nissan 240Sx With SR20DET Engine, With Oe Manifold And Turbo Only.
Description
Product Description:100% Brand New Items, Never Used Or Installed
Made of high quality T304 stainless steel material
Hi-Performance Down Pipes significantly improve exhaust flow and are properly sized to maximize power and torque.
Direct install with no modification required.
Professional Installation is Highly Recommended
No Instruction Included
Package includes:
1 x downpipe
All necessary hardware, bolts, and gaskets
Fitment:
1989 -1998 Nissan 240SX with SR20DET Engine, with OE manifold and turbo only.
For Year and Model, Please Check Compatibility
9. 89-98 Nissan 240SX S13 S14 S15 SR20 Turbo Exhaust Turbo Outlet 90 91 92 93 94 95 96 97
Feature
100% T-304 Stainless Steel Piping mandrel bent to maximize exhaust flow mated to computerized CNC-machined flanges with TIG-welds for strength and long-lasting durability.Designed for use on OEM Turbochargers.
70mm outlet. Smooth mandrel bends flow better than OEM Cast Turbo Outlets
All hardware is included for a direct bolt-on fit,o2 sensor bung is M18x1.5 thread pitch
Vehicle Application: 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 Nissan 240SX S13 S14 S15 SR20 Turbo