Finding your suitable dc motor kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best dc motor kit including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Icstation DIY Simple DC Electric Motor Model Assemble Kit for Kids Physics Science Educational Toys
Feature
Simple permanent magnet DC motor model to DC electric motor working principle demonstration teachingSimple design easy to assemble and disassembled ideal for school scientific projects or teaching.
Equipped with power cable after connected to the 3-6V power supply,it will rotate like a real motor
Working Voltage: DC 3-6V,Model Size(assembled):14X9X10cm/5.51X3.54X3.94inch(L*W*H)
Ship it out by USPS with tracking information and 7-17 days delivery time usually
Description
This is a simple permanent magnet DC motor model to demonstrate the DC electric motor working principle. It can be taken apart and reassembled, when powered with 3-6V voltage, it will rotate like a real electric motor ideal for school scientific projects or physics teaching.2. TEDCO Simplest Motor (Age 8+) Colors May Vary
Feature
This is a hands-on first step into technologyBuild and observe a motor that converts electrical energy into motion
Discover and explore first-hand several key properties of electricity and magnetism
Full instructions provided
See the Tedco Simplest Motor in action on YouTube
Description
TEDCO Simplest Motor (Age 8+)3. ScienceWiz - DC Motors (Pack of 4)
Feature
AWARD WINNING ScienceWiz curriculum is designed to teach kids science in an intuitive and natural progressionPower up with this practical set of DC motors made by the award winning science experiment creator, Science Wiz
Designed to work with many power sources, including batteries and solar cells
Each pack includes 4 motors with a voltage range of 0.5 to 3.0
Intended to be parts for use with science projects, science fairs, etc. and are provided with minimal to no operating instructions
Description
DC Motors -.5 to 3.0 volt. Four motors per package. Will work with many power sources - batteries and solar cells work perfectly. Great fun, perfect for science experiments and projects with electricity. Ages 6 and up.4. Lucksender 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear
Feature
75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material:plastic Type:spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar Quantity:75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee CollarDescription
75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material:plastic Type:spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar Quantity:75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar5. American Educational 7-1847 Miniature Motor Model, 5-1/2"Length x 3-1/2" Width x 4-1/4" Height
Feature
Miniature AC and DC motor model demonstrates permanent and electromagnetic motors for students in grades 8-12Includes all motor parts, a wrench, and screwdriver for assembling the motor
Motor base doubles as protective case for parts
Completed model measures 4-1/4" x 3-1/2" x 5-1/2" (H x W x D)
Description
The American Educational 7-1847 AC and DC motor model includes all parts for assembly in a protective case. This miniature AC and DC motor model demonstrates permanent and electromagnetic motors for students in grades 8-12. It includes all motor parts, a wrench, a screwdriver, and instructions for assembling the motor. The motor base doubles as protective case for parts. The completed model measures 4-1/4" x 3-1/2" x 5-1/2" (H x W x D). (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)
Science education products incorporate applied math and science principles into classroom and homeschool-based projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.
American Educational Products manufactures learning materials in math, science, and reading/language arts for students in pre-kindergarten through grade 12. The company, founded in 1986, is headquartered in Fort Collins, CO.
What's in the Box?
- Parts to assemble the model
- Wrench
- Screwdriver
- Plastic case
- Instructions
6. Flormoon DC Motor Mini Electric Motor 0.5-6V 15000RPM High Torque Magnetic Motor for DIY Toys 5 Pack(Silver+Black)
Feature
Color:Siler+Black;Voltage:DC 0.5-6V;Rated Speed:15000 RPMMotor Body Diameter:27mm/1.06";Mounting Hole Distance(center to center):15mm/0.59"
Shaft Size:10x2.0mm/0.39"x0.08"(L*D);Motor Body Length;38mm/1.46"
Perfect for mini fan,electric toys and science experiments etc.Will work with many power sources batteries and solar cells
OUR GUARANTEE: We provide 90 days money-back and 24 months warranty, So please don't hesitate to contact us if you have any questions or concerns
Description
Description: DC Motors 0.5-6V 15000 RPM,Five motors per package.Can work with many power sources-batteries and solar cells work perfectly.Great fun Motor,perfect for mini fan,electric toys and science experiments etc.Ages 6 and up.Features: -Color:Siler+Black -Voltage:DC 0.5-6V -Rated Speed:15000 RPM -Motor Body Length;38mm/1.46" -Motor Body Diameter:27mm/1.06" -Shaft Size:10x2.0mm/0.39"x0.08"(L*D) -Mounting Hole Distance(center to center):15mm/0.59" -Will work with many power sources batteries and solar cells work perfectly -Great fun,perfect for science experiments and projects with electricityPackage including 5 xFlormoon DC Motor Mini Electric Motor 0.5-6V 15000RPM High Torque Magnetic Motor for DIY Toys 5 Pack(Silver+Black)CHOKING HAZARD -- Small parts. Not for children under 3 yrs.Dont weld this item with hard wire7. Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Feature
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDCUp to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
Big terminal block connectors to easily hook up wires (18-26AWG) and power
Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20
Description
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.
In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.
Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well.
We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.
Install the easy-to-use Python library, check out the examples and you're ready to go!
Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers on
8. RoseSummer Diy Kit Small Dc Motor Vertical Micro Wind Turbines Blades Generator
Feature
100% brand new and high qualityProduct Includes : 1 * Motor 1 * Vertical blade (including 4 Pcs) 1 * LED Light
Motor diameter : 24.5mm/0.96"
Motor height : 34.2mm/1.35"
Motor shaft diameter : 2mm/0.079"
Description
Description:100% brand new and high quality
Motor diameter : 24.5mm/0.96"
Motor height : 34.2mm/1.35"
Motor shaft diameter : 2mm/0.079"
Motor shaft length : 13.5mm/0.53"
Blade diameter : 100mm/3.94"(after assembling)
Blade Aperture : 1.95mm/0.077"
Output voltage : DC 0.01v - 5.5v
Output current : 0.01 - 100mA
Rated speed : 100 - 6000 rev/min
Product Includes :
1 * Motor
1 * Vertical blade (including 4 Pcs)
1 * LED Light
9. EMO Smart Robot Car Chassis Kit with Motors, Speed Encoder and Battery Box for DIY
Feature
Ideal for DIY, Multi-function and Various kinds of positioning holesHoles for all kinds of modules. It can be used with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control
Convenient installation, firm and reliable
2 DC gear motors , Motor reduction ratio of 48:1
Can be used with raspberry pi or arduino
Description
Feature:Simple mechanical structure and easy installation.Smart robot car with code disc and ideal for DIY.Using for distance and speed measurement due to the tachometer encoder with the car.Realizing functions of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control when used with other devices.Note:This car is the tachometer encoder.Come with a 4 AA battery box (batteries not included).The car Chassis is transparent; you need to tear out protective paper.Package Included:1 x Car chassis2 x Gear motor2 x Car tire2 x Speed encoder4 x Fastener1 x Universal wheel1 x Battery box(batteries not included)All necessary screw and nut.10. ELEDIY DC Motor and Plastic Gear Kit Motor Gear Sets For DIY Car Robot
Feature
The plastic DIY gears kits are for toys gear spare parts packageMany uses, fun for kids and adults to use and learn,to avoid deglutition, not suggested
It includes worm gears,crown gears and a couple of other gears.
Suitable for DIY model production technology
Description
Set Includes:2 x DC Motor
1 x Battery Holder Case Box
10 x 2.0mm shaft -10mm
4 x 2.0mm shaft - 50mm
60 x gear
11. Open DC Motor Demo - 1.5V
Feature
Small-scale (3" x 2" x 1.75") open DC motor demoRuns at 1.5V, equivalent to one AA battery
Removeable magnets/fan
Demonstrates functioning of DC motor/electro-magnetic processes
Great classroom teaching tool for physics instructors
Description
DC Motors are used to power fans, windmills, generators and so much more. This particular model is open, exposing the components inside that make the motor function. As such, this is an effective and inexpensive tool for classroom demonstrations of DC motors, and electro-magnetic processes more generally. The magnets and the fan component are both removeable, allowing you to demonstrate the important role that the magnets play in running the motor. Includes two connecting posts to power the motor, which runs at about 1.5V, the equivalent of the power generated by a AA battery. Connect a battery holder to the posts and watch it go!12. Kit, DC Motor in Self Storing Box
Feature
Fully self-contained model is both fun and educationalBuild it yourself model demonstrates how AC and DC motors work
Learn about both permanent and electromagnet motors
Includes required tools and instructions
Description
Build a miniature electric motor using this smart little kit. This kit contains all necessary parts to build the motor pictured (even a handy little wrench). It conveniently sets up on the plastic storage case, and can be assembled in minutes. This device demonstrates the basic principals of electric motor operation. Through the process of assembly, the builder becomes familiar with the mechanisms of simple electric motors.13. Everything you Need to Build a DC TOY MOTOR KIT. Great for Science Fairs
Feature
To build a little DC motor in this kit (except sandpaper, screwdriver, scissors and, of course, an AA battery).The instructions are simple and explain the theory as well as assembly. Fun and educational.
Description
All you need to build a working DC motor and learn its parts from the inside out! Assembly involves winding your own armature and field coil; building the commutator with two snap-together pieces; installing brushes into the holes in the base; and slipping one battery into battery clips. This isn't a watered-down geegaw with a few measly parts that you'll handle once and then discard. This clever kit has been used for over 40 years to teach crucial concepts to children aged 10 and up.Kit includes: coil of copper wire; plastic base with holes for parts; field poles; armature core; brushes; all fasteners; and detailed, illustrated assembly instructions with 8 experiments. You need 1 AA battery.
14. Vibration DC Motor + AA Battery Holder w/Switch
Feature
Type 130 1.5-6V motor soldered to 1xAA battery holderBattery holder features cover and switch
Perfect for robotics projects, solar or battery powered cars, brush bots, fans and wind mills, and more
Leads connecting from motor to holder approximately 5.5 inches in length
If further specifications for motor are required, feel free to contact us
Description
This reliable and affordable 1.5 to 6V DC motor with off-balance vibration weight comes presoldered to a 1xAA battery holder and is perfect for hobby electronics and robotics projects requiring vibration. The battery holder features a cover and an on/off switch. Perfect for robotics projects, solar or battery powered cars, brush bots, fans and wind mills, and more.15. Smart Robot Car Two Chassis Kit with 4 DC Gear Motors, 4 Speed Encoder Disk Easy to Install and Multi-functional Package for Arduino Projects from Optimus Electric
Feature
4 x wheel4 x DC gear motor
4 x speed encoder disk
2 x chassis
Screws and nuts
Description
This is a very simple and easy to install 4 motors robot kit which is perfect for your smart car or robot projects.
This robot kit is a ZX-4WD car model and the kit includes 4 wheels, 4 DC gear motors, 2 chassis, 4 speed encoder disks, screws, and nuts.
Package Includes
4 x wheel
4 x DC gear motor
4 x speed encoder disk
2 x chassis
Screws and nuts
4 x battery holder