ROTARY TABLE 4" 100MM SELF CENTERING 3 JAW CHUCK with TAILSTOCK & CLAMPING KIT (1)

Related posts

Feature

Rotary Table 4" Our 4" (100 mm) Rotary Table is Designed for smaller milling machines.
100 mm Self Centering Chuck & Backplate
A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground.
Clamping Kit M6
This Tailstock is mostly used in between our Rot

Description

Rotary Table 4" with 100 mm Self-Centering Chuck & Backplate Rotary Table 4" Our 4" (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16" (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. 100 mm Self Centering Chuck & Backplate A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same) Designed to fit our 3 or 4" Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. TAILSTOCK This Tailstock is mostly used in between our Rotary Table 3" , Rotary Table 3" Tilting, Rotary Table 4" , Rotary Table 4" Tilting and Rotary Table 4" HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. CLAMPING KIT M 6 These Clamping Kits is used with our 3" Rotary Table to clamp on the Machine Table. Set Contains 2 Clamps 4 LN Screws of M 5 Thread with 4 Flange nuts and 2 T-Nuts of Metric Thread. These are Polished and Ground from all the Sides.