Related posts

Feature

Upgrade new high-speed diode, Soundwave resonator(SAW)to keep stabilizing frequency. This product is already matched, just simply connect the line and get it to work right away.
Wireless coding technology, no direction, switch without disturbing each other, you can turn on or turn off the receiver with transmitter(remote control)from any place within a reliable distance.
The strong signal can pass through walls,floors and doors,control receiver from any place within a reliable distance.
The receiver controller receives and stores the signal from remote control,dispensing with traditional jumpers or switches coding with its high confidentiality,large storage,stable performance.
Applications: Widely used in various anti-theft alarms, security systems, remote-controlled devices,motor-driven curtain, roller blind door, garage/gate barriers, motorcycles, short-range and long-range wireless remote control products, industrial control products.

Description

ELENKER 1CH wireless RF Remote Control Switch Transmitter with Receiver

Receiving Board parameters
Operating Voltage: DC 12V
Operating Frequency: 315 MHz
Receiver Sensitivity: >-105dB
Maximum Load: 7A 240V AC / 10A 24V DC
Encoding Type: Learning Code
Board Size: 34 x 31 x 18mm
Weight: About 30g

Remote Control Parameters
Operating voltage: 12V (12V 23A Battery)
Frequency: 315MHZ
Encoding Type: Fixed Code
Firing Range: 100 meter(open) in theory, 15%-30% in reality
Size: 35x 55x 13mm
Shock Resistance: 4.7M
Battery for Transmitter :23A 12V
Weight: About 24g

Note:
This ELENKER Remote Control Switch has been set up before leaving the factory, and the pairing has been completed, no need to pair again.
Please connect the wiring according to the wiring diagram.
Turn on the power, if the power led is not lit, the line is not connected,please check the line first.
If the wiring is correct and the power led is lit but cannot work, please clear the code first and then learn the new code.

Clearing Code Method:
--- Turn on the power, power led lit, learning led will light for 3 seconds and then go out.
--- Press and hold the learning key.
--- The learning led will turn off after 8 seconds.
--- Complete clearing code.

Learning Code Method:
--- Turn on the power, power led lit, learning led will light for 3 seconds and then go out.
--- Press the learning key once.
--- At this time, the learning led lights up.
--- Press the remote control button, the learning led will light off
--- Complete learning code.

Package Included:
1 x ELENKER Remote Control Switch Transmitter