Related posts
Feature
The power supply module uses double sendust magnets winded with 1.2mm copper wires100V/210A low resistance MOS with big power and current input, suitable for big power LED, motors
Support reverse input protection with MOS so there is no worry about wrong input wire and burn out power supply
Low voltage protection will protect module and battery against damage from over-discharge when use a storage battery as input
Thickened heatsink and intelligent temperature control cooling fan dissipate heat better
Description
Specifications:
Type: Non-isolated step-up module (BOOST)
Input Voltage: DC10V to 60V
Max. Input Current: 30A
25A
Quiescent Current: 15mA
Output Voltage: 12V to 90V
Max. Output Current: 20A
Constant Current Range: 0.8A to 20A(+/-0.3A)
Reverse Input Protection: Yes (150A MOS)
Lower Voltage Protection: Yes (V8 to 50V adjustable, self-recovery)
Operating Temperature: - 40 to +85
Frequency: 150KHz
Conversion Efficiency: 92% to 97%
Input Over-current Protection: Yes
Short Circuit Protection: Yes
Wiring Method: Terminals
Max. Output Power = Input Voltage*Max Current
Size:130 x 84 x 52mm / 5.11 x 3.3 x 2.04"
Note:
1. Output wiring can not be reversed or short circuit.
2, If the module is connected to inductive load, the minimum input voltage should be higher(e.g. 24V) and maximum output power should be lower(e.g. 500W).
3, If a storage battery, switch power supply, solar panel or electric generator is used as input power source, the low voltage protection value should be adjusted lower, otherwise it might cause damage.
Package Includes:
1 x Module