When you looking for soldering kit electric, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable soldering kit electric is not an easy task. In this post, we show you how to find the right soldering kit electric along with our top-rated reviews. Please check out our suggestions to find the best soldering kit electric for you.
Reviews
1. Soldering Iron Kit,Including 60W Temperature Control Soldering Iron, 130PCS Heat Shrink Tubes, Tips, Solder Sucker, Solder Wire, Tweezer (green tool case)
Feature
[15-in-1 Soldering Kit]: Kit comes with soldering iron, desoldering pump, solder wire, stand, 5 solder tips, 130pcs heat shrink tubes, 2 electronic wires, anti-static tweezer, wire stripper cutter in a hard carry case, the excellent structural design ensured all your soldering project needs.[Functional Design& Fast Heats Up]: 60 watts, heat up to standby efficiently just in few minutes. Adjustable temperature with thermostat range 200~450. 6pcs interchangeable tips from broad chisel to super-fine for a variety of different projects.
[Easy for Carry& Widely Used]: Green tool carry case is rather convenient to store small tools and easy to carry. The item is great for electric repair, home DIY , skills training and other soldering project.
[Desoldering Pump &Solder Sucker]: The desoldering pump is high pressure vacuum with an aluminum body frame, which allows easy one-handed use; best for removing solder from PCB through-hole solder joints.
[Premium Quality Heat Shrink tube]: Shrinkage Ratio:2:1. Excellent flame retardant and insulation performance. Soft and flexible, low shrinkage temperature, fast shrinkage, acid and alkali resistance, anti-aging. Comes with 6 colors , satisfied for your different need Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and daily repairs etc.
Description
Dollve Welding Soldering Iron Kit design for various uses - Meet All Your Soldering Project Needs.Specification:
- Working Voltage: 110V
- Power: 60 watt
- Soldering Iron Length: 7.4 inch
- Cable Length: 59 inch
- Temperature Range: 200-450- (392-842)
- Tips Model: 900M Series
- Solder Wire: 60% Sn, 38% Pb, 2.0% Flux
- Solder Wire Diameter: 0.039 inch
- Solder Wire Weight: 0.38 oz
Package Inculded:
1 x Adjustable Temperature Soldering Iron (with 900M-T-B Lead-free Soldering Iron Tips)
1 x Solder Wire
1 x Desoldering Pump
1 x Anti-static Tweezers
1 x Stand with Cleaning Sponge
1 x Wire Stripper Cutter
1 x Green Carry Toolbox
2 x Electronic Wires
5 x Extra Lead free Soldering Iron Tips
130 x Heat Shrink Tubes
How to solder
1. Prepare the solder wire and electronic soldering iron.
2. Contact the soldering iron with soldering point.
3. Place the solder wire onto soldering point when the weldment is heated to the temperature that is able to melt solder.
4. When a certain amount of solder is melted, remove the solder wire.
5. Remove the electronic soldering iron at an angle of about 45 when the soldering point has been totally wet by solder.
Caution:
- Ensure the power cord is in good condition and the welding head is not loose before soldering.
- For prolonging service life, please switch to the 200C model when not using it temporarily and don't let the soldering iron stay at high temperature all the time.
Warranty:
30 Days Warranty.It's appreciate your patience to view and please feel free to contact with us.-Click to Add to Cart. Thank you
2. Anbes Soldering Iron Kit 60W Adjustable Temperature Welding Tool,Digital Multimeter,2pcs Soldering Iron Tips,Desoldering Pump,Wire Stripper Cutter,Tweezers,Soldering Iron Stand,2pcs Electronic Wire
Feature
Soldering Iron with ON/OFF Switch - The soldering iron kit with ON/OFF Switch,it is easy to save energy and ensure safe welding.You just need to turn it off if you don't want to use it.The insulating silica gel on the iron can effectively protect the iron from being ironed at high temperature or the iron tips dropping on the ground.Soldering Iron Upgrade for Multimeter - Easy use Digital Multimeter for measuring DC&AC voltage,DC and AC current,resistance,diode and continuity test.Measuring Instrument with function of data hold and read on large LCD.
8-In-1 Precision Pocket Screwdriver - Only taking slightly larger space of a fountain pen.The base of what you holds is magnetic so that you won't lose your screws easily.It is the compact size and very handy combination screwdriver.
Heat UP Quickly & Heat Dissipation Efficiency - The 60W soldering iron heats up very fast with inner-heated ceramic technology and steel-pipe design has better heat dissipation than others.
Portable Storage and Carry - PU Carry Bag is rather convenient to store small tools,which can avoid losing the soldering accessories.The color is younger and fashionable.The item is great for electric repair,home DIY and other soldering project.
Description
Anbes Soldering Iron Kit design for various uses,from home DIY,electrical repairs jobs and other soldering project.The soldering iron kit has a wide range of uses around home and work.
Upgrade Version:
Adding an ON/OFF switch,you can turn the soldering iron on or off.More safer and ease.
The Soldering Iron Kit with Digital Multimeter.Large LCD to read data.
8-in-1 Precision Pocket Screwdriver,multiples tips for your solder,keep it inside the pocket.
Specification:
Work Voltage: 110V
Power: 60W
Temp Rang: 200 - 450
Soldering Tips Material: Pure copper
Tweezer: ESD-15, ength 4.7inches
Soldering Iron Stand: Steel
Tips Model: 900M series
Desoldering Pump: Plastic and aluminum alloy
Solder Wire: 60%Sn-40%Pb
Carry Bag: PU leather
Package Included:
Adjustable Temperature Welding Iron with ON/OFF Switch x 1
Soldering Iron Tips x 2
Digital Multimeter x 1
Desoldering Pump x 1
Anti-Static Tweezers x 1
Screwdrivers x 1
Soldering Iron Stand x 1
Wire Stripper Cutter x 1
22awg Electronic Wire x 2
Solder Wire x 1
Test Leads x 1
PU Carry Bag x 1
Warm Tips:
1.Remove the multimeter back cover, insert the AAA battery(Battery not included).
2.Please be really careful when you are using the tools in avoidance of pricks or other injuries.
3.The iron heats up fast, so please select a suitable temperature. Working for long hours and high temperature may shorten its life.
4.Do not allow the iron to idle at operating temperatures for extended periods, This could burn the soldering iron and even other things.
3. Whatnot Widgets 12 Piece Electronic Soldering Iron Kit with Adjustable Temperature 110V Electric 30-50 Watt Iron, 3 Tips, Helping Hands, Stand, Solder, Sucker, Wick, Tip Cleaner and holder, Tool Case
Feature
Adjustable Temp Iron heat range equal to or greater than most 60 Watt Soldering Irons 200-500 CMost Complete Soldering Kit neatly stores all tools in Sturdy Carry Case
Heats Quickly & Efficiently for repair of computers, electronics, RC, amps, jewelry & crafts
High Quality Components - Guaranteed Quality - 90 Day No Questions Asked Return Policy
100% CE & RoHS Safety Compliance Certified for clean health and environmental protection
Description
SUCH A COMPLETE SOLDERING IRON TOOL KIT!
This 12 piece soldering kit is manufactured with the same high quality standards as all other Whatnot Widgets brand name products. It's great for small electronics repair at home, office, or work and is loved by experts and beginners alike.
Our Adjustable Temperature Iron can develop a temperature range greater than most 60 Watt Soldering Irons - heats 390 to 840 F but as high as 900+ (200-500 degrees C).
Kit Includes 12 Pieces (11-in-1) 11 soldering components stored in 1 Carry Case:
* 1 Adjustable Temperature Soldering Iron - 30-50 Watt Range up to 900+ degrees F (200 to 500 C) - 110 Volt 2 Prong Corded Electric - Clear Plastic Handle
* 1 Conical Tip
* 1 Bevel (Hoof) Tip
* 1 Chisel Tip
* 1 Helping Hands w/ 2 alligator clips and 2X magnifier
* 1 Desoldering Pump - Gold Aluminum Tube - Teflon Nozzle
* 1 Desolder Wire - 2mm X 1.5M
* 1 Solder Wire Pen - 1mm Rosin Core Solder - 15g 60% SN (tin) 40% PB (lead) 2.2% Flux
* 1 Iron Stand
* 1 Brass Tip Cleaner
* 1 Cleaner Holder
* 1 Hard Plastic Carry Case
IDEAL FOR REPAIR OF:
* cell phones, tablets, computers
* tvs, radios
* Xbox, other gaming devices
* model trains, remote control vehicles, toys
* any small electric or electronic device (speakers, monitors, etc)
* jewelry, crafts, etc.
CE & RoHS Certified - complies with EU electronics safety and environmental requirements.
Instructions available online.
90-day No Hassle Warranty on this product - Contact us for any issues with your item within 90 days, and we'll replace it -or- offer a full refund for your purchase.
SPECIAL SALE NOW, SAVE $20.00!
GET YOURS TODAY - CLICK ADD TO CART AT TOP OF PAGE NOW!
4. 6-in-1 60W Soldering Iron Gun with Carry Case and Cleaning Sponge Stand, SOAIY Adjustable Temperature Welding Soldering Iron , Including 5pcs Different Soldering Tips, Desoldering Pump, Soldering Wire
Feature
6-in-1 FULL KIT - Kit comes with tool carry case, soldering iron, 5 soldering tips, soldering sucker (desoldering pump), solder wires, stand with Cleaning Sponge. FULL SET tool make it perfect for daily use such us electric repair, home DIY and wood burning projection.HEAT UP Quickly - 60 watts, with Upgraded ceramic heater chip and heat up quickly (2 minutes or so). Adjustable temperature with thermostat range 200~450.
Better Heat Dissipation hole and anti-slip handle - 3 heat dissipation holes on the tips and anti-skid rubber handle is good for long time project.
Safe and environmental protection soldering wire included, there are ingredient listed on the tinned tube package, lead free solder wire is Environmentally friendly , non-toxic, non-polluting, safe to use.
Easy for storage - Tool carry case is an additional feature, and rather convenient to store small tools and easy to carry.
Description
How to solder:1. Prepare solder and soldering iron; Specially, it's necessary to keep the tip clean, which should be coated with solder.
2. Please wet the sponge before using.
3. Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly.
4. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely.
5. Please remove the solder wire when the tin is enough.
6. Take away the soldering iron in a direction approximately 45and power off.
7. Don't pull the soldering iron tip outward and use it in that way, which will shorten the heating element life.
Specifications
Work voltage: 110V
Power: 60W
Temp range: 200~450
Tips model: 900M series
Case material: Plastic
Stand: Steel
Solder sucker: Plastic and aluminum alloy
Solder wire: 97%Sn-0.7%Cu-2.0%Flux-0.8mm dia.- 0.64 oz
Package included
1 x Tool carry case
1 x Adjustable temperature soldering iron (60W 110V)
1 x Solder wire
1 x Stand with Cleaning Sponge
1 x Solder sucker(Desoldering Pump)
5 x Extra soldering iron tips (Total 6 Pieces)
1x User Manual
5. Sywon Full Set 60W 110V Electric Soldering Iron Kit with Adjustable Temperature Welding Iron, 5pcs Tips, Desoldering Pump, 2pcs Tweezers, Tin Wire Tube, Stand and 6pcs Aid Tools in PU Carry Bag
Feature
Works at adjustable temperatures from 200 to 450 and with a LED indicator; Plug and playInner-heated ceramic technology makes the soldering iron heat up very quickly; Upgraded heat resistant material (not plastic) and the steel-pipe four ventilation holes on the solder design helps cool fast
6pcs of double-sided assist tools to meet the welding operation requirements of press, cutting, scraping, hooks and brushes etc
2pcs anti-static tweezers: one ESD-10 model and the other ESD-15 model. Also includes pocket pack solder 60/40 0.031 0.50 oz. tube
One PU leather carrying case sweetly designed for you to carry all the units conveniently; Portable soldering holder with cleaning sponge holds the soldering iron to ensure safety and convenience
Description
Sywon Electric Full-set Soldering Iron kit can surely satisfy your de-soldering and soldering needs around the house. With its various extras, you can easily deal with PCB projects, solder loose wires and circuits of small gauge, repair jewelry, LED lights of various kinds and intricate pieces of computers, replace TV capacitors or accessories, and work on small parts for RC cars, micro drones or any other trinkets.The PU leather carrying bag makes it handy for transporting all the units together, an amazing gift for your friends or family members who are hobbyists, DIY enthusiasts or soldering beginners.
Package Specification:
1 x Soldering Iron: Tempature adjustable from 200 to 450 (392 to 842 ); 60W 110V.
5 x Extra Solering Tips: General 900M series
2 x Tweezers: ESD-10 , ESD-15
1 x Solder sucker: 7.36 inches (L) x 0.75 inches (Dia.); Aluminum and plastic
1 x Tin wire tube: 60/40 0.031 0.50 oz.
1 x Soldering holder with cleaning sponge
1 x Carrying bag: PU leather
6pcs double-sided solder assist tool can satisfy 12 different usage: Around 6.6 inches in length; Treated steel (tips), and plastic (handle); including the following:
1 x Solder assist knife: cut away unnecessary circuits on PCB
1 x Solder assist fork: the components of pins and connecting line
1 x Solder assist squeeze head: compress small electronic components
1 x Solder assist hook: remove small resistor
1 x Solder assist brush: clean dust and residues in solder parts
1 x Solder assist needle: clean holes that choked with solder
Notes:
1. Please be really careful when you are using the tools in avoidance of pricks or other injuries.
2. The iron heats up fast, so please select a suitable temperature. Working for long hours and high temperature may shorten its life.
3. The 6 tips are general 900M series and you can buy replacement on Amazon.
Warranty: 12-month Guarantee
6. Soldering Iron Kit Electronics, 16-in-1, 60W Adjustable Temperature Soldering Iron, 5pcs Soldering Iron Tips, Solder, Rosin, Solder Wick, Stand and Other Soldering Kits in Portable Toolbox
Feature
16-in-1 Soldering Iron KIT - Soldering iron kit comes with soldering ironwith 1.5m power cable, solder wire, desoldering pump, solder wick, stand with cleaning sponge, 5 multiple soldering tips, 2 anti-static tweezers, rosin (solder paste), copper wire, scissors, screwdrivers(electric pen), insulation tape, knife and a hard carry case to meet all your soldering project needs.HEAT UP QUICKLY and HEAT DISSPATION EFFICIENCY -60 watts, upgrade PCB'A, we use the Chip Fixed Resistor while others on the market use the Color ring resistance, heat up quickly(2 minutes or so). Adjustable temperature with thermostat range 200~450. With our upgrade steel-pipe design, the soldering iron is more efficient in a better heat dissipation.
DURABLE SOLDER WICK& DESOLDERING PUMP -The solder wick is 2.0mm wide, 1.5m in length, 0.4oz in weight and is easy to clean residue flux, especially in hard-to-reach areas. The desoldering pump(solder sucker) is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use; best for removing solder from PCB through hole solder joints.
PORTABLE STORAGE TOOLBOX - The multifunctional toolbox is rather convenient to store small tools. which can avoid losing the soldering iron gun and accessories. Sweetly designed for you to carry anywhere for electric repair, home DIY and other soldering projects.
RANGE of APPLICATIONThe soldering iron sets are the best gift idea for DIYER, various repaired usage of electronics and chipboards, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories, trinkets of your children, crafts and more.
7. Tabiger Soldering Iron Kit 60W 110V-Adjustable Temperature Welding Soldering Iron with Tool Carry Case
Feature
Soldering KIT - Soldering iron kit comes with soldering iron, solder wire, desoldering pump, stand with cleaning sponge, 5 multiple soldering tips, anti-static tweezers, and a hard carry case to meet all your soldering project needs.HEAT UP QUICKLY and HEAT DISSPATION EFFICIENCY -60 watts, heat up quickly(2 minutes or so). Adjustable temperature with thermostat range 200~450. With our upgrade steel-pipe design, the soldering iron is more efficient in a better heat dissipation.
DESOLDERING PUMP -The desoldering pump(solder sucker) is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use; best for removing solder from PCB through hole solder joints.
PORTABLE STORAGE TOOLBOX- Plastic carry case is rather convenient to store small tools and easy to carry. which can avoid losing the soldering gun and accessories. It is rather convenient to carry anywhere for electric repair, home DIY and other soldering projects.
RANGE of APPLICATIONThe soldering sets are the best gift idea for DIYER, various repaired usage of electronics and chip boards, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories, trinkets of your children, crafts and more.
Description
Why do you choose us:1.Tabiger welding soldering iron kit comes with adjustable soldering iron, solder wire, 5 interchangeable soldering heads, desoldering pump, anti-static tweezers, Y stand, and sponge.
The soldering kit is an excellent kit for home use, hobbyists, DIY solderers, enthusiasts, novice, classes.
2. There are 5 interchangeable soldering tips to match all your soldering needs.
3.The tool case can avoid getting hurt by these sharp tools.
How to solder:
1.Prepare solder and soldering iron; Specially, it's necessary to keep the tip clean, which should be coated with solder.
2. Please wet the sponge before using.
3. Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly.
4. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely.
5. Please remove the solder wire when the tin is enough.
6. Take away the soldering iron in a direction approximately 45and power off.
7. Don't pull the soldering iron tip outward and use it in that way, which will shorten the heating element life.
Specification
Work voltage: 110V
Power: 60W
Temp range: 200 ~ 450
Tips model: 900M series
Tweezer: ESD-15, length 4.7 inches
Y stand: steel
Desoldering pump: plastic and aluminum alloy
Solder wire: 60 percent tin, 2.0 percent flux, 0.8 mm diameter, 0.71 ounce.
Package Included
soldering iron
solder
desoldering pump
soldering tips(6 in total)
Ystand
anti-static tweezer
toolbox
