We spent many hours on research to finding magnetometer arduino, reading product features, product specifications for this guide. For those of you who wish to the best magnetometer arduino, you should not miss this article. magnetometer arduino coming in a variety of types but also different price range. The following is the top 9 magnetometer arduino by our suggestions:
Reviews
1. HiLetgo MPU9250/6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250
Feature
Main ChipMPU-9250Power supply: 3-5V (internal low dropout regulator)
Communication: standard IIC communication protocol
Built-in 16bit AD converter, 16-bit data output
Using Immersion Gold PCB, machine welding process to ensure quality
Description
InstructionThis module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.
Specifications:
* On-board pull-up resistors on SDA, SCL, and nCS
* On-board pull-down resistors on FSYNC and AD0
* 3-Axis Accelerometer
* Range: up to 16 g
* Sensitivity: up to 16,384 LSB/g
* 3-Axis Gyroscope
* Range: up to 2000 deg/sec
* Sensitivity: up to 131 LSB/deg/sec
* 3-Axis Magnetometer
* Range: 4800 T
* Sensitivity: 0.6 T/LSB
* Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator
* Interface: I2C
* 2C Address: 0x68 by default, 0x69 if AD0 is pulled high
* Board Dimensions: 25.5mm (1.004") long x 15.4mm (0.606") wide, 3mm (0.118") inside diameter of mounting holes
* Weight: 2.72g (0.096oz)
Package Included
1* MPU9250/6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor
1* Ten pin male header (1x10)
2. WINGONEER GY-273 QMC5883L Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5V
Feature
Chips: QMC5883LCommunication: IIC communication protocol
Measuring range: 1.3-8 gauss
Description
WINGONEER trademark Reg.NO:4747611WINGONEER GY-273 QMC5883L Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5V
Specifications:
Name: QMC5883L module (three-axis magnetic field module)
Model: GY-273
Use the chip: QMC5883L
Power supply: 3-5v
Communication: IIC communication protocol
Measuring range: 1.3-8 Gaussian
Size: 13.9 * 18.5MM
Package Included:
1x WINGONEER QMC5883L Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5V
3. MPU-9150 MPU6050 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor Module 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module IIC/SPI for Arduino
Feature
The MPU-9150 is the world's first 9-axis MotionTracking component designed for low-power, low-cost, high-performance consumer electronics devices such as smartphones, tablets, and wearable sensors.The MPU-9150 includes InvenSense's motion-sensing integration (MotionFusion) and run-time calibration firmware, which allows manufacturers of products with motion sensing to eliminate, select, and integrate at the system stage The cost and trouble of each component, and to ensure that the sensor fusion algorithms and calibration procedures can provide the best performance of the consumer.
MPU-9150 for the system-level package (SiP: System in Package) products, integrated two chips: one for the MPU-6050, with three-axis gyroscope, three-axis accelerator, built-in complex 9-axis motion sensing fusion Algorithm of digital motion sensing processor (DMP: Digital Motion Processor).
The other for the AK8975, is a three-axis digital electronic compass. MPU-9150 contains the nine-axis motion sensing fusion algorithm, can connect all the internal sensors, collecting the entire set of sensing data. This product is a 4x4x1mm LGA package that provides a simple upgrade path for the MPU-6050 integrated six-axis motion sensing tracking component, making it easy to install on a space-constrained board.
Gyro range: 250 500 1000 2000 / s. Acceleration range: 2 4 8 16g. Magnetic field range: 1200uT.
Description
Product Name: MPU-9150 module (three-axis gyroscope + three-axis acceleration + triaxial magnetic field);Using the chip: MPU-9150;
Power supply: 3-5v (internal low voltage regulator);
Communication: Standard IIC communication protocol;
Chip built-in 16bit AD converter, 16-bit data output (magnetic field 13);
Gyroscope range: 250 500 1000 2000 / s;
Acceleration range: 2 4 8 16g;
Magnetic field range: 1200uT;
Package Included:
1*MPU-9250 MPU6050 9-Axis 9 DOF 16 Bit Gyroscope Acceleration M
4. SparkFun (PID 13762) IMU Breakout - MPU-9250
Feature
Digital-output X-, Y-, and Z-axis angular rate sensors (gyroscopes) with a user-programmable full-scale range of 250, 500, 1,000 and 2,000/sec and integrated 16-bit ADCsDigital-output triple-axis accelerometer with a programmable full-scale range of 2g, 4g, 8g and 16g and integrated 16-bit ADCs
3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
Digitally programmable low-pass Gyroscope filter Gyroscope operating current: 3.2mA
VDD supply voltage range of 2.4 - 3.6V
Description
The SparkFun MPU-9250 IMU Breakout features the latest 9-axis MEMS sensor from InvenSense. Each of these 9DoF breakouts feature an MPU-9250 with a System in Package (SiP) that combines two chips: the MPU-6500, which contains a 3-axis gyroscope as well as a 3-axis accelerometer, and the AK8963, which features a 3-axis magnetometer. This breakout has been designed to be smaller than some of our other offerings to fit in smaller projects. However, if you plan to use a breadboard, or secure the IMU board to a project with something like epoxy, the mounting holes can be easily snapped off.To achieve its smaller size, the MPU-9250 Breakout features PTH pins that have been wrapped around the border of the PCB in three rows of three or four. The top row (J1) is all one needs to get the most functionality out of the IMU. These include the I2C and power interface. The second most likely to be used set of PTHs are found along the bottom (J3). This includes the address pin, the interrupt pin, and the IO voltage supply for easy interface with a more modern 1.8V processor. The third, a non-breadboard-compatible row (J2), is used for features like running other I2C devices as slaves to this one. For prototyping with these connections, throw your connections on top as you would with an Arduino Pro Mini or similar product.
The MPU-9250 replaces the popular EOL MPU-9150 and decreases power consumption by 44 percent. According to InvenSense, "Gyro noise performance is 3x better, and compass full-scale range is over 4x better than competitive offerings." The MPU-9250 uses 16-bit Analog-to-Digital Converters (ADCs) for digitizing all nine axes, making it a very stable 9 Degrees of Freedom board.
5. SunFounder MPU6050 Module for Arduino and Raspberry Pi, 3-axis Gyroscope and 3-axis Accelerator
Feature
Integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port, like another accelerator of other brands, magnetometer, or Digital Motion Processor (DMP) of other sensorsWith three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs
Supports the I2C serial interface and has a separate VLOGIC reference pin
User-programmable gyroscope, with a full-scale range of 250, 500, 1000, and 2000/sec (dps) and a user-programmable accelerometer with a full-scale range of 2g, 4g, 8g, and 16g
Working voltage: 3.3v-5v; PCB size: 1.65 x 2.0 cm
Description
ApplicationInstantGestureTM iGTM gesture recognition
Location-based services, points of interest, and dead reckoning
Handset and portable gaming
Motion-based game controllers
3D remote controls for Internet connected DTVs and set top boxes, 3D mice
Wearable sensors for health, fitness and sports
Toys
Component List
- 1 * MPU6050 Module
- 1 * Straight Pin Header
- 1 * Right-angle Pin Header
6. WINGONEER MPU 9250 SPI/IIC 9-Axis Attitude Module Gyro Accelerator Magnetometer
Feature
100% brand new and high quality MPU-9250 module( 3 axis accelerator, 3 axis gyro and 3 axis magnetometer)Chip: MPU9250; Power voltage: 3~5V
Communication mode: I2C / SPI; Gyro range: +/-250, +/-500, +/-1000, +/-2000dps
Accelerator range: +/-2G, +/-4G, +/-8G, +/-16G
Description
WINGONEER trademark Reg.NO:4747611WINGONEER MPU 9250 SPI/IIC 9-Axis Attitude Module Gyro Accelerator Magnetometer
Description:
Chip: MPU-9250
Power supply: 3-5v (internal low dropout regulator)
Communication: Standard IIC / SPI communication protocol
16bit AD converter-chip 16-bit data output
Gyro range: 250 500 1000 2000 / s
Acceleration range: 2 4 8 16g
Magnetic field range: 4800uT
Using Immersion Gold PCB, machine welding process to ensure quality
Module size 15mm * 25mm
Magnetometer range: +/-4800uF
Pin spacing:2.54mm
Package Included:
1x WINGONEER MPU-9250 9-Axis SPI/IIC Attitude +Gyro+Accelerator+Magnetometer Sensor Module
7. SODIAL(R) LSM303C 3 Axis 6DOF Accelerometer Magnetometer Sensor Module for Arduino
Feature
3 magnetic field channels and 3 acceleration channels with +/- 16 gauss magnetic full scale and +/- 2;+/- 4 ; +/- 8 g selectable acceleration full scale16 bit data output with I2C / SPI communication interface
Analog supply voltage 1.9V to 3.6V support Power-down mode and low-power mode
Programmable interrupt generators for freefall, motion detection and magnetic field detection Perfect for eCompass projects
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) LSM303C 3 Axis 6DOF Accelerometer Magnetometer Sensor Module for Arduino
Material: Metal
Size: 18.67 x 16mm
Colour: Purple
Quantity: 1 pcs
Package Contents: 1 x Accelerometer Magnetometer Sensor Module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
8. WINGONEER MPU9250 BMP280 GY-91 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor
Feature
Chip: MPU-9250 + BMP280Power supply: 3-5v (internal low dropout regulator)
Communication: standard IIC / SPI communications protocol
Chip built 16bit AD converter, 16-bit data output
Description
WINGONEER trademark Reg.NO:4747611WINGONEER MPU9250 BMP280 GY-91 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor
Product Descriptions:
Gyroscopes range: 250 500 1000 2000 / s
Acceleration range: 2 4 8 16g
Magnetic field range: 4800uT
Pressure range: 300-1100hPa
Using Immersion Gold PCB, machine welding process to ensure qualit
2.54mm pin pitch
Module size:(L*W)2.05* 1.43cm/0.81"*0.56"
Package included:
1x WINGONEER BMP280 GY-91 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor
9. MPU-9150 9DOF 3 Axis Gyroscope+Accelerometer+Magnetic Field Replace MPU-6050
Feature
Digital-output 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format.Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ?250, ?500, ?1000, and ?2000dps.
Tri-Axis accelerometer with a programmable full scale range of ?2g, ?4g, ?8g and ?16g, Tri-axis compass with a full scale range of ?1200?T.
Reduced settling effects and sensor drift by elimination of board-level cross-axis alignment errors between accelerometer, gyroscope, and compass.
VDD Supply voltage range of 2.4V-3.46V; VLOGIC of 1.8V?5% or VDD, Full Chip Idle Mode Supply Current: 8?A, 400kHz Fast Mode I?C serial host interface.
