If you looking for fluid extractor pump then you are right place. We are searching for the best fluid extractor pump on the market and analyze these products to provide you the best choice.
Reviews
1. Happybuy Oil Extractor 7 Liter Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover for Automotive (7Liter Oil Extractor)
Feature
Color: White; Fluid Extractor Capacity: 7 liters; Fluid temperature range: 35F- 200F/1- 95CNylon hoses: 7.8 x 9.8mm; 5.3 x 6.7mm; 4 x 6mm(0.3X0.4inch; 0.2X0.26inch; 0.16X0.24inch)
Portable fluid extractor empties in 16 pumps or less, no power source needed, includes extraction tube kit
Includes extraction tube kit, storage more, improve work efficiency. Muti-size hose: change different sizes for different condition
The 7 liter oil extractor is constrcuted from composite materilas and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. It is also suitable for low viscosity fluids such as waters.
Description
7 Liter Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover
This 7L Oil Changer is used in extracting or changing engine oil or lubricants in motor vehicles, motor, bikes, marine engines, stationary engines. The kit includes 6.7mm and 6mm suction probes to drain engine oil through the dipstick hole and a 9.8mm main extraction to drain such items as fish-tanks, basins, baths, cisterns, sinks etc.
Oil extraction
1. Ensure the vehicle is on level ground and run the engine for approximately 5 minutes to warm the oil and allow any contaminants within the oil to thoroughly mix and turn the engine off.
2. Remove the vehicle's oil dipstick.
3. Connect the main suction tube to both the pump inlet and probe.
4. Raise the handle to its highest limit and pump it fully several time to create a vacuum which will automatically begin to extract the oil/fluid.
5. Once completed, remove the main suction tube from the pump, pour the oil/fluid into a suitable container and dispose of it in accordance with local authority regulations.
6. In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows.
Specification
Color: White
Capacity: 7 liters
Nylon hoses: 7.8 x 9.8mm; 5.3 x 6.7mm; 4 x 6mm(0.3X0.4inch; 0.2X0.26inch; 0.16X0.24inch)
Fluid temperature range: 35F- 200F/1- 95C
Muti-size hose: change different sizes for different condition
Portable fluid extractor empties in 16 pumps or less
Larger capacity than competitive models in the same field
By manpower to push and have vacuum pressure
Storage more, improve work efficiency
Package Content
1 X 7 L Oil Extractor
1 X 9.8mm Nylon Hose
1 X 6.7mm Nylon Hose
1 X 6mm Nylon Hose
2. OEMTOOLS 24389 Manual Fluid Extractor
Feature
MULTIPURPOSE EXTRACTOR: Designed to extract engine, transmission and lubricating oils from cars, motorcycles, marine engines and industrial machinery.VERSATILE APPLICATIONS: Extracts oil, power steering fluid and low-viscosity fluids, such as water and coolant.
EASY-TO-USE: Includes 5 feet of flex hose and (2) specialized dipstick adapters to extract fluids directly from the dipstick tube.
MINIMIZE CLEAN-UP TIME: 1.4 Gallon fluid reservoir features a dependable single-piece construction to drastically reduce oil and fluid spills during fluid maintenance jobs.
OVERFLOW PROTECTION: Shut-off valve prevents fluids from overflowing.
Description
The OEMTOOLS fluid Evacuator has a 1.4 gallon (5.6 Quarts) reservoir with hand operated pump to tackle Big jobs and can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.3. EWK Pneumatic / Manual 6.5 Liter Oil Changer Vacuum Fluid Extractor Pump Tank Remover
Feature
Two functions oil changer-manual & pneumatic - Quick extraction on pneumatic mode, 1.6L/min. - Oil changing anywhere without compressor on manual mode.Widely used for fluid extraction - engine oil, gear oil, brake oil, coolant, water, etc.
Connected hoses fits car, marine, lawn mower and industrial machinery.
Extraction without car lifted up! Special angle spout design makes everything clean. Changing oil, your best partner!
Description
Customer Service
1. Office hours: Monday to Friday 9:00am to 3:30pm (Pacific Time).
2. We will reply your message within 24~48 hours.
Shipping
1. Monday to Friday (orders placed before AM8:00) will be shipped within 24 hours.
2. Orders placed after Friday AM8:00 or national holiday will be shipped on the coming business day.
3. Buyers responsible for all custom and brokerage fees for shipments outside of the United States.
30 Days Money Back Guarantee
1. Customer MUST contact us within 30 days after the purchasing.
2. Item must be sellable condition with the original packaging. Fees may apply if item is determined as not original condition.
3. Buyer should be responsible for the return freight.
4. 20% restocking fee is NON-REFUNDABLE under any circumstances.
Warranty
1. Most of items which were marked "warranty" on the selling page apply to the warranty policy. Some item is not included.
2. Warranty period: 1 year
3. The warranty only covers the defects under normal use.
4. The warranty DOES NOT cover the defect was subjected to misuse, negligence or accident.
5. The warranty DOES NOT cover consumable parts.
6. EWK reserves the right of final decision.
4. OTC (2359) Oil Suction Gun
Feature
Aluminum die-cast headDeluxe lip seal provides maximum suction
Use to inject or remove gear oils from differentials transfer cases and gear boxes
16 ounce capacity
Description
The OTC 2359 is made with an aluminum die-cast head and a deluxe lip seal provides maximum suction. Use to inject or remove gear oils from differentials, transfer cases and gear boxes. 16 ounce capacity.5. Mityvac 7201 Fluid Evacuator Plus
Feature
Features a large 8.8 liter (2.3 gallon) capacity bi-functional manual unit to extract and dispense a wide-range of fluid typesClean and simple way to evacuate and dispense fluids
Reservoir is constructed of durable polyethylene and will not rust or corrode
Automatic flow control valve prevents the unit from overfilling during use and automatically shuts off at 8 liters
Features 0.23" OD x 5' long (5.7 mm OD x 1.5 m long) dipstick tube, 0.26" OD x 5' long (6.6 mm OD x 1.5 m long) dipstick tube, 0.41" OD x 5' long (10 mm OD x 1.5 m long) main evacuation tube
Description
Mityvac fluid evacuator requires no power to create a vacuum and pressure to evacuate and disperse most automotive liquids and chemicals. Features an external pump design for easy access. The large capacity, 8.8 liter fluid reservoir has automatic flow control, preventing overfilling. It also has a pressure relief valve for safety.6. Briggs & Stratton 5431K Oil Extractor Pump, 4-Liter
Feature
Briggs & Stratton 5431KGenuine Briggs & Stratton Oil Extractor Pump 4L
New OEM Part
Description
Display pack of 4 liter oil extractor pump. Suitable for the extraction of oil fuel from outdoor power equipment, cars, motorcycles, commercial vehicles, marine engines, stationary engines and other machinery.7. Hydro-Turf Oil Extractor 6-Liter OIL01
Feature
Oil changes are now a snapSeveral strokes of the pump create a vacuum that neatly captures up to 6 liters (1.57 gal.) in the sturdy container
Pour spout is included to help empty container
Pump is removable for easy storage
Works great for snowmobiles, boats, personal watercraft, cars, motorcycles, ATVs and more
Description
Oil changes are now a snap. Several strokes of the pump create a vacuum that neatly captures up to 6 liters (1.57 gal.) in the sturdy container. Pour spout is included to help empty container. Pump is removable for easy storage. Works great for snowmobiles, boats, personal watercraft, cars, motorcycles, ATVs and more.8. Air Power America 5060TS Topsider Multi-Purpose Fluid Removing System
Feature
Easy to use; powered by vacuum pressure - no electricity neededQuickly extracts old oil through the dipstick tube into the 8 quart container
Wide 12 inch diameter stance provides a stable base - eliminating any potential spills
Portable - easy to operate in confined spaces
No mess from spills or inconvenient drain plugs - used oil and other liquids are stored safely for proper disposal
Description
The Topsider's reliability and convenience has long been trusted by boaters for easy, no mess oil changes, and other marine and automotive maintenance applications. No electricity required, the Topsider multi-purpose vacuum pump-out system uses a vacuum to pull oil out of your crankcase. A 12 inches diameter stance provides a stable base, eliminating potential tip-overs and spills, simply slide the withdrawal hose down your dipstick hole, open the valve and wait for 8 to 10 minutes. All of your old oil will be drawn into the Topsider's 8 Quart container. Very easy to use, suction probe and instructions included.9. ALEKO OEXP02 1.6 Liter Oil and Fluid Extractor Pump For Automotive Fluids
Feature
Extracts and transfers almost any fluidPerfect for draining motor oil, transmission fluid, coolant, brake fluid, gear lube, etc
Includes 1.6 liter tank, 52 and 53 inch hose, suction lock, hand pump and funnel
Ideal for automotive vehicles, watercraft, ATV/motorcycles, farm equipment, lawn equipment, household
Securely stores used fluid for transport or disposal
Description
Our oil and fluid extractor pump makes it quick, easy and clean to pump oil and other automotive fluids out of engines, transmissions, radiators and more. Package includes a 1.6 liter tank, 52 and 53 inch hose, suction lock, hand pump and funnel. Simply assemble, snake the extractor tube into the fluid and pump the handle. 1.6 liter capacity makes it ideal for most passenger vehicles on the road today. Also works great on boats, ATVs, farm equipment, lawn equipment, household plumbing and more. Lightweight, compact, easy to assemble and use.10. 12V Transfer Pump Extractor Oil Fluid Diesel Electric Siphon Car Motorbike
Feature
Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industriesNote: If you want to connect this pump to AC power, you will need a power converter
How to use: Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.Connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
Open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move,then put the inlet pipe from the oil dipstick into in end.
After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
Description
Specification:Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm
Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe
11. Mityvac 7400 7.3 Liter Fluid Evacuator
Feature
Evacuates all kinds of fluids including engine oil, transmission fluids, gear oil, coolant, and brake fluidLarge 1.9 gallon reservoir (7.3 liters) hand operated pump for the big jobs
Includes 5 feet of flex hose and two dipstick hoses
Features polyethylene construction and will not rust or corrode for durability
Quick-drain pour spout
Description
Mityvac 7.3 liter fluid evacuator features stiffening ribs for added durability. The redesigned pump handle is stronger for heavy use and longer tool life. A larger base prevents the chance of tipping and spills in shop.12. XtremepowerUS 12v Fluid Oil Diesel Extractor + Tubes Truck Rv Boat ATV
Feature
12 Volt / 5 Amp DC MotorOil Transfer Flow Rate: 3 Litres Per Minute
Diesel Transfer Flow Rate: 4 Litres Per Minute
Description
Good Quality Oil / Fluid / Diesel Transfer Pump Extractor A Great Way To Extract Oil Or Fluid From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment etc13. Wekster Multi-Purpose Siphon Transfer Pump Kit, with Dipstick Tube | Fluid Fuel Extractor Suction Tool for Oil, Gasoline, Water, Liquids & Air
Feature
The Wekster multi-use self priming siphon liquid transfer pump kit includes 2 long hoses with a dipstick tube, safely extracting & inserting liquids like oil gas and water. And an air pumping hose and adapter for inflating air into tires etc.SPECS: Gas Syphon Pump with intake & discharge tubes: 9" - 2 Hoses (with black connectors): each 50"/127cm, OD: 1/2" ID: 11/32" - Dipstick tube: 48", OD: 1/4" ID: 1/8" - Air pressure tube: 15", OD: 7/16" ID: 1/8"
QUALITY: Durable hard plastic pump provides perfect pressure with rapid siphoning transfer, and thick plastic hoses to ensure no leakage or slops - Rubber dipstick tube transfers oil without melting from heat - High-quality acid & water chemicals resistant equipment.
DESIGN: Smooth action handle with 2 long flexible red hoses reaches anywhere - Extractor dipstick tube sucks oil from any vehicle - Easy Assemble/Disassemble for efficient cleaning.
USES: Easy large hand vacuum pump with intake & discharge transfer system for motor oil changes, overfilled tanks, off season storage, refueling empty tank from gasoline container, draining transmission petrol fuel, diesel & gas from cars, trucks, tractors, snow blowers, boats, lawnmowers & outdoor power equipment, or draw water from aquarium tanks, unclog plumb toilet sewage, separate sediment when brewing beer or wine - inflate tires, balloons with the air pressure adapter.
Description
About The Wekster 3-in-1 Multi-Use Large Siphoning Pump Kit with Air Inflating Adapter The Problem:Whether your car is out of fuel or in need of an oil change, or you just want to storage power equipment for off season by draining its liquid, why pay top dollars for the easy to do job? Our Solution:
The Wekster Leak-Free Manual Hand Siphon Pump Kit with Long Hoses and Adapters, for transporting liquids like oil and gas. Kit Includes: Intake & Discharge Hand Pump Dipstick Tube Air Pressure Hose 2 Red Hoses 2 Black Safety Connectors Inflator Nozzle Blower Nozzle Tube Connector Rapid Transfer:
Quickly transfers liquids up to 3 gallons per minute, and air with just a few easy pumps. Long Hoses:
50-Inch long red hoses are durable and thick accessing hard to reach places. Easy to Clean:
Easily disassembles for proper cleaning (Recommended after transferring petrol or flammable liquid). Important Tip:
For proper siphoning, the discharge hose must be lower than the intake hose. Benefits: Essential oil extractor tool for vehicles Suctions gas/oil from jet skis tanks Drains liquids from hard to reach areas like drums Pumps out excess overfilled liquid Great spout for refilling transmission fluid Bilge liquid removal tool on boats Inflate car or stroller tires, air mattresses, balls and balloons Evacuate air from chambers and barrels Repair window air conditioners Also useful for cooking and baking During brewing separate sediment from liquid Best squeeze tube bulb pump alternative Can be used as a sump pump Works in places that funnels will not fit Complete using instructions included Save Money and Do Your Draining/Transferring by Yourself!
14. Nulink153; 12V Fluid Oil Diesel Extractor Scavenge Suction Transfer Pump For Truck, RV, Boat, ATV
Feature
COMPACT & DURABLE: Ideal for quick and easy oil changes that you can do at home. Compact size to storage in your garage, total dimensions: 5.1" x 6" x 3.3" (in).EASY JOB DONE: Decrease the mess making it less of a hassle, Use for cars, boats,motorcycles, and more. Easy to transfer diesel to machinery and equipment
SAFETY PURPOSES: Take special care when handling inflammable goods or fuels. Avoid using low burning fluids suck as gas, paraffin, petrol. Work with fuels that have high burning points.
PRODUCT SPECIFICATIONS: Pump Dimensions: Approx 5.1 x 5 x 3.3 in, Input Voltage: 12V DC, Rated Current: 5A, Sound Pressure Level: 70 dB, Vibration: <2.5m/s2, Maximum Flow Rate for Diesel or Heating Oil: Approx 1.5 L/min, Maximum Flow Rate for Motor Oil (40 - 60C): Approx. 0.2 L/min, Maximum Delivery Height: 2.3 ft.
All NuLink products GUARANTEE defect free/ damaged & come with 1 Year warranty. Message us if you have any problems.
Description
Product Description
The NuLink presents a great and easy way to extract oil or fluids from your vehicle. Ideal for quick and easy oil changes you can do at home. This pump will decrease the mess making it less of a hassle. This can be used for cars, boats, motorcycles, and more! You can even siphon and transfer diesel to machinery and equipment. You won't need any additional or specialized tools. Portable and lightweight design that you can take anywhere. For safety purposes, take special care when handling inflammable goods or fuels - You should avoid using low burning fluids such as gas, paraffin, petrol, etc and only work with fuels that have high burning points
Specifications
Pump Dimensions: Approx 5.1 x 5 x 3.3 in
Input Voltage: 12V DC
Rated Current: 5A
Sound Pressure Level: 70 dB (A)
Vibration: <2.5m/s2
Maximum Flow Rate for Diesel or Heating Oil: Approx 1.5 L/min
Maximum Flow Rate for Motor Oil (40 - 60C): Approx. 0.2 L/min
Maximum Delivery Height: 2.3 ft
Package Includes:
1 x Oil Pump Unit
1 x Suction Hose
1 x Drain Hose
2 x Hose Clamps
1 x Instruction Guide
CAUTION: DO NOT keep the oil-extractor running exceed 30 minutes to avoid over heat. Cool it down before you turn it on again. DO NOT use the extractor for the following liquids: Water (no lubrication of the pump) Gearbox-oil (too viscous) Easy inflammable liquids (fuel, petrol, etc;)
All NuLink products GUARANTEE defect free/ damaged & come with 1 Year warranty. Message us if you have any problems.15. Performance Tool W54171 Manual 8 Liter Oil Changer Vacuum Fluid Extractor Pump Tank Remover
Feature
Conveniently remove oil or other liquids with no mess from spills or inconveniently accessed drain plugs.Evacuates fluids including engine oil, transmission fluid, gear oil, coolant, and power steering fluid.
Small equipment including; lawn mower, tillers, generators, ATV?s, motorcycles, or other 4-cycle engines.
Manually operated hand pump. Includes hoses needed to fit dip stick holes, or fill ports. Larger equipment including; cars, trucks, boats, farm, construction and much more.
8 Liters(2.11 Gal) Polyethylene constructed reservoir, large enough for most jobs.
